Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Silver solder tip - holding the parts  (Read 804 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Silver solder tip - holding the parts
« on: July 14, 2023, 06:11:37 AM »

I’m looking for tips on how to hold two parts in position while silver soldering. I assume a piece of clay would be the thing…in fact there are vids on YT showing this. Obvs is needs to withstand the high temperature.
Is this what silver solderers do in the UK? There is a clay product sold in the US but nothing aimed at this task in the UK. Though if there is something…can you direct me to it? There is probably a silver or gold smithing trade practice that solves the problem. I’ve seen lumps of clay for sale on eBay. I’m minded to experiment with this.

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Silver solder tip - holding the parts
« Reply #1 on: July 14, 2023, 09:37:38 AM »

Assuming you're silver soldering small mechanism parts, then something along these lines work well:
https://www.cousinsuk.com/product/third-hand-on-soldering-board

There are very cheap ones which are horribly wobbly, and outwardly similar but looking more expensive ones which are much much better!
I use a double one like these to hold the larger part of what I am working on, and a smaller single one to hold the other part of the assembly in position.

Graham
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Silver solder tip - holding the parts
« Reply #2 on: July 14, 2023, 10:04:15 AM »

Oh right. Does it cope with the high gas torch temp? I would have thought 800C or higher would destroy a clamp station like that. Obvs it’s ok for lower temp flux core soldering.

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Silver solder tip - holding the parts
« Reply #3 on: July 14, 2023, 10:19:50 AM »

The ones I have seem fine.
High temperatures are no problem, but the joints are generally pretty small so very localised heat from a Sievert torch with a very fine nozzle.

I guess this is one of the price differences - decent stands have very chunkily made clamps that will cope with and dissipate a lot of heat. Cheap'n'cheerful ones have
what looks like alligator clips which as you suggest will just get destroyed very rapidly.

Graham
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Silver solder tip - holding the parts
« Reply #4 on: July 14, 2023, 10:49:24 AM »

Thanks.

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Silver solder tip - holding the parts
« Reply #5 on: July 14, 2023, 11:34:55 AM »

Use a piece of cuttlefish bone (what you find in a bird cage) the parts can be pushed unto the bone and positioned as needed. The bone will withstand the temp and can be reused many times, being filed with a rasp to expose fresh surfaces.
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal