Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Non-speaking buttons  (Read 768 times)

0 Members and 1 Guest are viewing this topic.

Andy Duckering

  • Good talker
  • **
  • Offline Offline
  • Posts: 59
  • Cotswold Border Garland
Non-speaking buttons
« on: July 14, 2023, 01:46:15 PM »

If a particular button on both treble rows (in this case the 7th) is not speaking on the pull is that a clue to a particular fault? Thank you for any advice!
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Non-speaking buttons
« Reply #1 on: July 14, 2023, 01:57:40 PM »

Andy,is this on the box that I sold you,if so it is covered by 12 month warranty as are all our pre loved instruments

Please,if anyone has a box that Acorn Instruments supplied that has a problem in the warranty period please contact me.
Even if outside the warranty period I can sort it and am willing to help

Pete
www.acorninstruments.co.uk
« Last Edit: July 14, 2023, 01:59:15 PM by pete /acorn »
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Andy Duckering

  • Good talker
  • **
  • Offline Offline
  • Posts: 59
  • Cotswold Border Garland
Re: Non-speaking buttons
« Reply #2 on: July 14, 2023, 02:57:26 PM »

Hi Pete, honestly no it's not, I'd have come straight back to you if it was!  It's the little Loffet single voice I started with a few years back.
Logged

MikeK

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 354
Re: Non-speaking buttons
« Reply #3 on: July 14, 2023, 03:33:19 PM »


I've previously had that problem. Could be a speck of dust on the reed. A good strong pull on that note dislodged it. Another time I had to open the box and
 give the offending reed a gentle ping with a small needle. That also did the trick.
Logged
I always respect my elders but they are getting fewer in numbers.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Non-speaking buttons
« Reply #4 on: July 14, 2023, 04:12:19 PM »

You mention the 2 rows have the problem on button #7.  Since it's a single voice box, chances are the reedplates for these 2 buttons are mounted on either side of a single reedblock and 'something' is causing a problem there.
Logged

Andy Duckering

  • Good talker
  • **
  • Offline Offline
  • Posts: 59
  • Cotswold Border Garland
Re: Non-speaking buttons
« Reply #5 on: July 14, 2023, 04:40:41 PM »

Thank you for responses so far. Update - the strong pull method cured the issue on the D row but not the G row. Will have another go at pinging the reed.
Logged

Scobarandbar

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Non-speaking buttons
« Reply #6 on: July 14, 2023, 06:50:04 PM »

Hi Andy

On another note. Did you get a Benny in the end?  I remember you were looking at one after my Father in law bought that 12 bass Hohner off you.  He plays it regularly and is happy with it. Scott
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal