Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Old Koch not airtight:  (Read 964 times)

0 Members and 1 Guest are viewing this topic.

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Old Koch not airtight:
« on: July 14, 2023, 05:22:44 PM »



An old Koch is not airtight.  Bellows seem OK,  but the "mechanism" does not pull the parts together - and I will probably have to change the seal.
Any suggestions how to solve the problem?

Since my photos are huge, I'll send links instead. I hope its OK?   

https://files.ifokus.se/u2/3369bf1bb580e92575a85ade0cbac2c5/default/
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Old Koch not airtight:
« Reply #1 on: July 14, 2023, 06:21:06 PM »

I assume you have tightened the adjustment knobs as far as they will go ?

Replacing the 'linkage' pieces (white-ish metal thingies with 4 drilled holes, probably not original) with shorter ones may do the trick.
« Last Edit: July 14, 2023, 06:26:23 PM by tirpous »
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Old Koch not airtight:
« Reply #2 on: July 14, 2023, 11:03:16 PM »

You said it yourself replace the seal first.
Logged
Mark Taylor
Folkloristmark

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Old Koch not airtight:
« Reply #3 on: July 15, 2023, 03:18:07 AM »

Quote
You said it yourself replace the seal first.

Only if there is something wrong with existing gaskets.  If mechanism fails to provide airtightness with (more or less) standard thickness gasket in good condition, then problem is with mechanism, not gasket. 
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Old Koch not airtight:
« Reply #4 on: July 15, 2023, 10:16:56 AM »

I've seen a  number of bellows clamping mechanisms similar to these, but the threaded adjusting hook is usually visible on the outside of the fixed mounting plate.
Where is it on here? It would seem that it must be in a rebate in the casework, which would be as unusual as it would be to unnecessarily add to the cost of manufacture!
Seems strange?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old Koch not airtight:
« Reply #5 on: July 15, 2023, 06:59:13 PM »

Can you feel air escaping from the bellows gasket area?   If not the air leakage may be elsewhere.  Pallets are also a very common location for air leakage.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Old Koch not airtight:
« Reply #6 on: July 16, 2023, 07:34:20 AM »

Can you feel air escaping from the bellows gasket area?   If not the air leakage may be elsewhere.  Pallets are also a very common location for air leakage.

Yes. And the mechanism works poorly. The mechanism does not pull the parts together.
Can this mechanism be replaced with something else?
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old Koch not airtight:
« Reply #7 on: July 16, 2023, 08:17:23 AM »

The light coloured metal strip that the pulling rod engages with looks as if it is not original. The holes in it may be too far apart.  My first step would be to makes replacements with more closely spaced holes.  Do some measuring first to estimated the spacing required.  You might need a couple of attempts to fined the ideal hole spacing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Old Koch not airtight:
« Reply #8 on: July 17, 2023, 09:36:22 AM »

The light coloured metal strip that the pulling rod engages with looks as if it is not original. The holes in it may be too far apart.  My first step would be to makes replacements with more closely spaced holes.  Do some measuring first to estimated the spacing required.  You might need a couple of attempts to fined the ideal hole spacing.
It looks to me as though the (threaded) pulling rods themselves have been removed and lost and "dead" links fitted in their place.Solution as Theo suggests. I would also if the original leather seals are still in place lift the nap on them by gently applyng a toothbrush.

After that pallet facings. Even more important than curled valves in my limited experience of barely playable boxes..
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old Koch not airtight:
« Reply #9 on: July 17, 2023, 10:05:42 AM »

The screw is there — you can see the top end projecting from the nut, and the hook of the lower end engaged in the top hole of the white metal strip.

Curled valves do need to be replaced,  but are not implicated in leaks from the bellows to the outside. Their effect only comes when a note is played and air can leak through the opposite reed on the same plate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal