Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How to re-wax single reed plate Melodeon?  (Read 920 times)

0 Members and 1 Guest are viewing this topic.

Dave Leith

  • New Starter
  • Offline Offline
  • Posts: 2
How to re-wax single reed plate Melodeon?
« on: July 17, 2023, 11:27:18 PM »

The melodeon has no manufacturers marks except "Made in Czechoslovakia". Not fancy at all so probably lower price when manufactured?

First time repairer....I have re-valved/re-waxed bass and chord section. I am now in process of re-valving the treble section. The reed blocks are glued in.

There seem to be ta few tricky things to re-wax. How does one go about re-waxing the plate when reinstalling?

1. It seems when originally built each of the wood chambers had small amount of wax on each chamber to seal from the next chamber...
2. As well it is very tight between the inner reed blocks to access and seal around the outside edges.

Thanks for any advice.
Dave
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How to re-wax single reed plate Melodeon?
« Reply #1 on: July 17, 2023, 11:45:37 PM »

This is probably the wrong thing altogether, and someone will be along shortly to put you right.
I would warm some wax and dip a small screwdriver, or similar, into it; then carefully try to get a light covering on all the edges of the reed chambers. Then, I'd warm those long plates on a radiator or something, before gently getting them into position and pressing them into their final place.
I certainly don't envy your task, but good luck!


 
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Dave Leith

  • New Starter
  • Offline Offline
  • Posts: 2
Re: How to re-wax single reed plate Melodeon?
« Reply #2 on: July 20, 2023, 02:36:11 AM »

Thank you Winston for that idea.

I did a slight variation on the radiator and just put the reed blocks out on our deck where the temperature mid-day was around 30C. Worked great and softened the wax that I had carefully put on the reed chambers! I was able to install and remove, tweak/cleanup and get all reeds sounding even without a complete sealing around the edge of wax. Will do that tomorrow.

So far so good...until the next thing I find wrong :-)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal