Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: tuning a stradella bass  (Read 2362 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
tuning a stradella bass
« on: November 18, 2009, 11:26:14 PM »

So far I've been doing all my tuning 'in the box' without using a tuning table.  I'm now trying to tune a stradella bass which I've never done before.   Is there a relatively easy way to  isolate a given reed on the chord reed block for tuning or do you have to use a tuning table?

Thanks,
Michael
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: tuning a stradella bass
« Reply #1 on: November 19, 2009, 07:44:51 AM »

Just tape over the air holes in the bass block for the reeds you want to silence. That way you just get the one note making it easy to identify and tune.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: tuning a stradella bass
« Reply #2 on: November 19, 2009, 08:39:28 AM »

Just tape over the air holes in the bass block for the reeds you want to silence. That way you just get the one note making it easy to identify and tune.

That works, but you do spend a lot of time pulling reedblocks in and out.

Another approach is to take off the bass end cover and use an appropriate tool to reach under and behind the mechanism to open individual pallets.  This will usually operate two reeds an octave apart, you might want to tape over the holes on one side of the block for this.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: tuning a stradella bass
« Reply #3 on: November 19, 2009, 09:15:38 AM »

With a suitable bit of board with a hole in, you can use the instrument's own bellows as tuning bellows.
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: tuning a stradella bass
« Reply #4 on: November 19, 2009, 09:31:53 AM »

It can be hard to get proper access to the reeds and blocks with the bellows still attached. For regular melodeon basses I will cover all but one of the chord reeds for each button meaning I can tune part of each chord without taking the blocks out. Once one is done you can just shift the tape over. Taking them out isn't such a pain with the Hohner swivel friction clasps (apart from the sharp ends) but I would agree that its a pain having to grab a screw driver for every note!
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: tuning a stradella bass
« Reply #5 on: November 19, 2009, 02:27:26 PM »

With a suitable bit of board with a hole in, you can use the instrument's own bellows as tuning bellows.

I've been thinking about something like that.  Have you made one that you could post a picture of?
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal