Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Re felting treble buttons  (Read 1880 times)

0 Members and 1 Guest are viewing this topic.

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re felting treble buttons
« on: August 07, 2023, 10:41:03 AM »

A couple of my instruments need new felt under the buttons. I mean....on the underside of the buttons.
I have got some good quality felt ordered in.
My question is....Do we have to punch the pads out with two different diameter punches, remove the buttons, stick the felt pads on then replace the buttons?.
Or....do we leave the buttons on , cut a thin strip of felt the correct length , apply glue and bend it round the bottom of the button?
Or neither?
I am a bit reluctant to try and force off plastic buttons on a 40 year old box.
It only needs one to break and the whole box is ruined.
Any advice welcome.
Thank you.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Re felting treble buttons
« Reply #1 on: August 07, 2023, 11:44:06 AM »

Depends on the type of button.  Can you post a photo?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Re felting treble buttons
« Reply #2 on: August 07, 2023, 07:37:06 PM »

Buttons can be repaired so I don’t think the whole box will be ruined. But having the button screw shear off or part company with the button can be a bit of a pain…though these things are always fixable one way or another. As Theo sez….a picture would be useful.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Re felting treble buttons
« Reply #3 on: August 07, 2023, 09:34:24 PM »

I am a bit reluctant to try and force off plastic buttons on a 40 year old box.


have you just tried unscrewing them? The buttons on my 80 year old hohner came off very easily, with no damage.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Re felting treble buttons
« Reply #4 on: August 08, 2023, 12:08:53 PM »

Question Please: What is the reason for fitting felt to the underside of the treble buttons ?
Thanks 
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Re felting treble buttons
« Reply #5 on: August 08, 2023, 12:24:32 PM »

Question Please: What is the reason for fitting felt to the underside of the treble buttons ?
Thanks

It's to stop them clacking against the keyboard.
They are not fitted to Hohner style flat keyboards where the button is in a hole.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Re felting treble buttons
« Reply #6 on: August 08, 2023, 01:10:47 PM »

Got it. thanks
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Re felting treble buttons
« Reply #7 on: August 08, 2023, 02:50:08 PM »

Question Please: What is the reason for fitting felt to the underside of the treble buttons ?
Thanks

It's to stop them clacking against the keyboard.
They are not fitted to Hohner style flat keyboards where the button is in a hole.

Except for the basses with mushroom buttons  :D
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Re felting treble buttons
« Reply #8 on: August 10, 2023, 12:10:38 AM »

Here is an image you asked for of the buttons in question.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Re felting treble buttons
« Reply #9 on: August 10, 2023, 08:49:08 AM »

I suspect this is the Garmoshka?  If that’s the case I don’t know how the buttons attach.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Re felting treble buttons
« Reply #10 on: August 10, 2023, 09:59:46 AM »

It is a Garmoshka.
The buttons are a tight fit onto the metal levers which are an L shape and directly form the pallet levers.
I think a way of doing it might be to remove the complete lever and button which may be possible via a hatch under the fingerboard.
It
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Re felting treble buttons
« Reply #11 on: August 10, 2023, 10:17:44 AM »

It is a Garmoshka.
The buttons are a tight fit onto the metal levers which are an L shape and directly form the pallet levers.
I think a way of doing it might be to remove the complete lever and button which may be possible via a hatch under the fingerboard.
It
If there is a hatch under the fingerboard you could apply a suitable thickness of felt for the lever to strike before the button hits the fingerboard. This is a common way of restricting/quieting the treble action.

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Re felting treble buttons
« Reply #12 on: August 10, 2023, 11:06:23 AM »

Very good point Lester.
I had not thought of that but....
An hour ago I went for it!!!
Removed hatch, removed finger board and was going to unscrew the whole button lever assy and remove in a oner.
But Duh!!! Thats not going to work either is it?
One way or another those pesky buttons are coming off.( Okay they are Ruski buttons)
In the end I carefully prised them off using a flat screwdriver blade against the fingerboard and bottom of the button.
I used a strip of leather to protect the F board.
Bingo. Within two minutes the lot were off.
So I cut a strip of felt 2.5mm wide and did a trial run using pva leather glue which sticks like heck.
I just coaxed the strip around the underside of the button which works and cheaper that buying just the right size hole punches.
I might apply a little heat with a hair drier to the buttons before replacing them.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Re felting treble buttons
« Reply #13 on: August 13, 2023, 12:16:03 AM »

All done now. Much better!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal