Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass end holes under hand  (Read 1223 times)

0 Members and 1 Guest are viewing this topic.

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Bass end holes under hand
« on: August 11, 2023, 10:28:36 AM »

I've got a box where some of the sound/air holes in the bass end are not very well positioned, and they sit under the palm of my hand while I'm playing, which isn't very comfortable. I think only a couple of the holes are a problem, so I don't think blocking them up would cause any issues in sound/air, I just can't work out a good way to do it. As a starting point, I've tried filling the holes with some self adhesive foam (intended to block drafts around windows), which has helped a little bit but not solved the problem because it's too soft.

I suspect an ideal fix would be to cut a disk of wood exactly the right size and glue it in place, but I'm not convinced I've got the woodworking skills for that.

Has anyone got any suggestions for what to do here? I'm not particularly worried about it looking seamless, because it's mainly out of sight, I really just want it to feel nice under my hand.

Thanks in advance for any help.
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Bass end holes under hand
« Reply #1 on: August 11, 2023, 01:02:52 PM »

Plugging the offending holes would work, but it's a lot of work.  You could tape them up or cover the area with a thin padded material.
« Last Edit: August 11, 2023, 02:53:48 PM by tirpous »
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Bass end holes under hand
« Reply #2 on: August 11, 2023, 01:42:19 PM »

You could make another end plate out of ply, using the existing palate as a pattern. This will preserve the existing plate, should you want to sell the box on.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Bass end holes under hand
« Reply #3 on: August 11, 2023, 03:51:48 PM »

I've have a large Elastoplast wound dressing stuck over the 'offending' hole on my Pressed Wood.
It has been stuck there for a few years with the padding of the dressing stopping my hand trying to invade the bass end hole!!
Totally reversible/replaceable :)
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Bass end holes under hand
« Reply #4 on: August 11, 2023, 07:43:19 PM »

 Two ideas- 1= Take off the bass plate. Stick duck tape firmly on the OUTSIDE of the holes.Mix some 2 part resin, pour into the holes & wait till it sets hard. Peel off tape = job done.
   Or  2= Measure the holes. Buy a length of hardwood dowel the same diameter as the holes( or sand to fit). Cut a slice off and glue into the holes you want to fill. This is the method I would choose.
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Bass end holes under hand
« Reply #5 on: August 12, 2023, 02:49:13 AM »

Maybe the OP has the hand-strap a wee bit too tight?
Or perhaps invest in a fingerless glove for the left hand?



« Last Edit: August 12, 2023, 02:57:39 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Bass end holes under hand
« Reply #6 on: August 12, 2023, 12:27:51 PM »


   my reading from Dickens suggests that anyone would like to wear fingerless gloves might be too mean to buy them 😉
Logged
  _       _    _      _ 

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Bass end holes under hand
« Reply #7 on: November 10, 2023, 01:48:01 PM »

Thanks for the suggestions everyone. I've tried a few things over the last few months, so thought I'd update this thread with my findings in case anyone else has a similar problem in future.

First I tried filling the holes with white tack and covering with sellotape. This was easy and better than nothing, but didn't feel very nice under the hand and looked a bit naff.

Next I replaced the sellotape with a little oval of black felt, stuck down with double sided tape (leaving the holes filled with tack). This looked fine but felt weird, and didn't provide enough friction to prevent my hand from sliding out of place.

Finally I decided to bite the bullet with a more permanent option, and after removing the tack and felt (and tape residue), I filled the holes with some brown wood filler. This looks good (not a perfect colour match, but miles better than my other attempts) and feels fine. I don't even notice it's there any more, so I'd say problem solved.
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal