Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Treble and bass button torsion spring tensions of 3 different Italian melodeons  (Read 352 times)

0 Members and 1 Guest are viewing this topic.

Mike Keen

  • Member
  • *
  • Offline Offline
  • Posts: 15

Posted this just in case anyone might be interested.

I measured the dead weight required to fully depress the treble and bass button on a Dino Baffetti Carnival III, Castagnari Sander and Serenellini 213K. All three were used instruments.

To do this I drilled a hole in the bottom of a  baked bean can and put a M6 bolt (about 3 inches long) through it so it poked out the bottom. I then added weight (various sized steel nuts) to the can until there was enough weight for the can, bolt and weights to full depress the buttons. I then weighed it. There was slight variation between the buttons so a range is given.

Results
Baffetti
Bass buttons   175 -200g
treble G row   93-100g
treble D row   135-140g
Lighter springs on the G row?

Sander
Bass buttons   165 -180g
treble G row   125-135g
treble D row   125-135g

Serenellini
Bass buttons   355-370g
treble G row   195-200g
treble D row   195-200g
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal