Daveovey’s advice sounds fine to me. What you are trying to achieve is “balanceâ€. When th bellows are too wide - starting a push section, or close together - starting a pull, your left thumb needs to press the button very slightly, “easing†a little more air through.
After some practice, that becomes automatic. Only in a few few tunes do you need to anticipate … e.g. a long pull section; and close your bellows beforehand. NB If the bellows are wide starting a pull section, or too close going the other way, it’s too late! 😳
There is also your bass end technique . If you play it fairly loudly, especially in holding the chords button down, are you will waste air and lose “balanceâ€. If you develop a lighter touch “spaces between the notes†there, (some people recommend “treat the left buttons as though they were hot enough to burnâ€) … air control becomes easier too. Occasionally you might need to hold down your chord, a bass and slip the air button, in an emergency! Best avoided!
Cross-row play also has a place on 2-row machines. eg the sequence E, F#, G, A, B (C/C#) phrase, or part thereof, can be played either on the pull, zig-zagging, or as push-pull along the appropriate row. So that gives you a choice: to fill your bellows, or maintain present balance.
That’s quite a lot, but it’s important not to think just in terms of the [air button]. Focus on that initially … then have bring in the other techniques. Don’t worry, it will all integrate together in time. We’ve all been there! 😉