Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Meinhold Melodeon repair completed  (Read 983 times)

0 Members and 1 Guest are viewing this topic.

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Meinhold Melodeon repair completed
« on: September 08, 2023, 10:22:37 PM »

Hello,
I was last on here in March of 2022 discussing the restoration/repair of an old melodeon I bought on ebay. There are some things I am unable to complete because I can't get the parts. I need 3 of the little brass horns above the keyboard. Three metal button covers. I made some out of wood so I could play it, and could shrink them to accept metal ones if I find any. I need some nice vintage decorative bellows clips that swing around and hook to the screw to keep instrument closed. I need a new bass end strap but that I can get in a color that is close to the original green. I wish I could have gotten metal bellows corners that were brass to match the nice old corners that are still on it. The paper I used on the bellows I got from Hollander's, a decorative paper supplier in Michigan. The purple paper covering the center divider and the joint of wooden end to bellows is the original bellows paper. I soaked the old bellows in warm water to dissolve the hide glue and when dried I glued them to other paper to strengthen them. They were very, very delicate and tore very easily but I managed to get enough to do what I wanted. I like the look better than if I used the burgundy red bellows tape which wasn't wide enough to cover that divider as much as I wanted anyway.
The reed plates had a small piece of folded leather glued in the gap under the plate to seal them. Because I want to get it out to Bob Snope to tune the reeds at some point I sealed the gaps with Replaceable Cord Weatherseal. My grandfather used it to seal windows in the winter, I still use it myself for that. It comes off easily and goes back on and sticks well. I got my pallet and gasket leather from Charlie Marshall and my bellows cardboard and gussets from Frank Morano here in Massachusetts. There are things that I would do differently if I did it again but that's no going to happen, once in enough. I got it to work and I'm thrilled.
Thanks to all who gave me advice, it was a great experience and really enjoyed it. Hope you like what I've done.
Tom
Logged

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Meinhold Melodeon repair completed
« Reply #1 on: September 08, 2023, 10:23:53 PM »

Part 2, Pictures

Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Meinhold Melodeon repair completed
« Reply #2 on: September 08, 2023, 10:54:44 PM »

What size are your buttons, I may have a few complete.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Meinhold Melodeon repair completed
« Reply #3 on: September 08, 2023, 11:01:27 PM »

Winston, they are 13/32" dia.(32" over 3/8") by about 5/16" deep.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Meinhold Melodeon repair completed
« Reply #4 on: September 09, 2023, 11:03:12 AM »

I have a few more than I remember, so you're welcome to some. I have noticed that the attachment face is not square, but chamfered so that the buttons lie square at the top face when at rest. Mind, they aren't perfect and will need cleaning up.
If these will suit you, then let me know how many you need, your address etc etc via a private message.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Meinhold Melodeon repair completed
« Reply #5 on: September 09, 2023, 11:59:43 AM »

Winston that will be great, thank you so much. I only need three. And yes the mounting surface is at a bit of an angle so the button sits correctly when, as you say it's at rest, I figured that out when I made the three wooden ones. We have a good friend who lives in London and is coming here some time soon. I will get her address and you can send them to her and she can bring them over, it will save some postage. You can let me know what postage will be from you to her address when I get it for you. The buttons look to be a perfect match to what I have, thanks again. Tom
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Meinhold Melodeon repair completed
« Reply #6 on: September 09, 2023, 03:53:10 PM »

As we village idiots here in the NE say; Champion!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal