Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Brass bellows corners?  (Read 573 times)

0 Members and 1 Guest are viewing this topic.

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Brass bellows corners?
« on: September 09, 2023, 09:04:43 PM »

Brass bellows corners, has anyone ever seen, have or know if they exist? New ones would have to also have a real tight radius. I've read that way back they were sometimes made of brass but I could never find any real old ones to use on my restoration other than buying another old instrument as a donor.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Brass bellows corners?
« Reply #1 on: September 09, 2023, 09:14:18 PM »

The new ones I’m aware of are all stainless steel now. Lots of older Hohners have brass corners. I usually salvage some when I replace an old bellows if you want to try a few.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Brass bellows corners?
« Reply #2 on: September 09, 2023, 11:13:15 PM »

Theo, if you had 32 of them how much would they cost me? Should we PM this?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Brass bellows corners?
« Reply #3 on: September 11, 2023, 05:05:42 PM »

The brass corners  I have are nickel plated, though the nickel has worn off in places, and the corner radius is about 8mm. Will that do what you want?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Brass bellows corners?
« Reply #4 on: September 11, 2023, 07:40:41 PM »

Try Aliexpress.
Lots of brass corners there for peanuts, but not sure if you can find the right radius, and not sure if they are solid or "fake brass" plated.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal