Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass mic positioning  (Read 1421 times)

0 Members and 1 Guest are viewing this topic.

Bakerspace

  • Member
  • *
  • Offline Offline
  • Posts: 48
Bass mic positioning
« on: September 13, 2023, 09:45:09 PM »

I have just purchased an atm350a mic to use on the bass end of some boxes.  Just working on a removable/magnetic mount to be able to swap between boxes.
Any advise on the best position to place the mic, and point it?
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Bass mic positioning
« Reply #1 on: September 14, 2023, 08:24:15 PM »

I have just purchased an atm350a mic to use on the bass end of some boxes.  Just working on a removable/magnetic mount to be able to swap between boxes.
Any advise on the best position to place the mic, and point it?

Doesn't make that much difference for bass ends, usual position is on the top face of the bass end with the gooseneck curved out sideways so the mic points down and slightly inwards (in the general direction of the sound holes).

Watch out for noise pickup from the air button though if it's near the mic...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Bass mic positioning
« Reply #2 on: September 16, 2023, 08:58:26 AM »

With the ATM350a, if you have the long gooseneck, you can clamp it on the last bellows fold on the left-hand side. Otherwise I clamp it to the strap.
If you want to swap between accordions, I'd place it on the front of the left-hand side case, on the bottom, that way as Ian said you'd be away from the air button.

Bakerspace

  • Member
  • *
  • Offline Offline
  • Posts: 48
Re: Bass mic positioning
« Reply #3 on: September 16, 2023, 09:58:03 AM »

Thanks both.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Bass mic positioning
« Reply #4 on: September 16, 2023, 11:47:33 AM »

Thanks both.

You're welcome :-)

I notice you didn't ask about the treble end, mic type and positioning matters a lot more here to get even pickup of all the notes. Or do you use a stand mic like I do?
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Bakerspace

  • Member
  • *
  • Offline Offline
  • Posts: 48
Re: Bass mic positioning
« Reply #5 on: September 16, 2023, 12:02:22 PM »

I swap between 2 different boxes when gigging, so plan is to use a stand mic on treble end, and the new atm350a on the bass.   May eventually get another one for the treble, but swapping mics over does take time, and this will be better than the 2 stand mics I've been using.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Bass mic positioning
« Reply #6 on: September 16, 2023, 06:20:24 PM »

I swap between 2 different boxes when gigging, so plan is to use a stand mic on treble end, and the new atm350a on the bass.   May eventually get another one for the treble, but swapping mics over does take time, and this will be better than the 2 stand mics I've been using.

That's what I do too, but I use a tieclip mic clipped to the inside of the bass end strap so it's right next to the soundholes and the strap reduces noise pickup***. Stand mic for the bass end doesn't work because it moves around a lot so you get volume changes, if you have it far enough away to reduce this it's too prone to feedback.

*** On some tunes I use a POG (Polyphonic Octave Generator) on the bass end, which somehow works on bass notes *and* chords and doubles everything an octave down. But if the bass end mic picks up the treble end, you get a quiet and slightly delayed octave down tune which is definitely not wanted. Getting the bass mic as close as possible reduces this to the point where it's unnoticeable.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal