Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner air hole size  (Read 2123 times)

0 Members and 1 Guest are viewing this topic.

rileyismycopilot

  • Member
  • *
  • Offline Offline
  • Posts: 27
Hohner air hole size
« on: September 26, 2023, 12:02:23 PM »

Hey folks,

Is it possible / does it make sense to reduce the air hole size on a 2915 / Erica?

I'm so used to play a HA114, and when playing my Erica, the air button management seems much different.

On the 114, I find myself constantly and naturally opening / closing the air spoon and the bellows react smoothly.
On the Erica, as soon as the air lever is pushed, it seems the bellows gulp a lot of air all of a sudden and the sound dies out for a brief moment, which kills the smoothness of the music. As if the air button was an "on / off" button with no middle ground.

Wondering if the air holes are different diameters on the 114 and the 2915 / Erica and if reducing its size on the Erica would make it gulp less air and make it more usable for the "in between" positions.

Thanks!
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Hohner air hole size
« Reply #1 on: September 26, 2023, 12:48:06 PM »

The quickest way to fine tune the amount of air you require is to stick a piece of "duct" tape over half the air hole - on the side of the reed blocks.
  It only takes a minute to pull the bellow pins out - add or remove tape as req'd - some of my boxes probably still have tape inside.😂
  You can of course replace the tape with wood later if you want (or remember) 👍
« Last Edit: September 26, 2023, 12:51:40 PM by SHTUM »
Logged

rileyismycopilot

  • Member
  • *
  • Offline Offline
  • Posts: 27
Re: Hohner air hole size
« Reply #2 on: September 27, 2023, 11:09:38 AM »

The quickest way to fine tune the amount of air you require is to stick a piece of "duct" tape over half the air hole - on the side of the reed blocks.

Hey!
Have you done this mod to your boxes? For the reason I mentioned? How is the result?

Thanks for the answers!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner air hole size
« Reply #3 on: September 27, 2023, 11:37:09 AM »

I think the air hole is pretty much the same size on a 114 or on a a 2915/Erica.  The difference you feel may be more to do with the mechanics of the lever and how your hand interacts with it.  I regularly play a Hohner with the same as valve as a 2915 and I don't find myself dumping too much air unintentionally.  In fact the ability to take a big gulp of air can be very helpful when you have a relativly long passage that's mostly on one bellows direction.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner air hole size
« Reply #4 on: September 27, 2023, 11:57:43 AM »

If you feel that the Erica air hole dumps too much air, you should try using the air button on one of the old 3 voice Club boxes. They immediately collapse the bellows.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner air hole size
« Reply #5 on: September 28, 2023, 05:09:07 AM »

Yes..the 'air hole' is a big long slot ..on one of my old Hohners. A marvellous thing, a large hole like that.  8)

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hohner air hole size
« Reply #6 on: September 28, 2023, 09:33:03 AM »

There was a thread, a while back, about a design for an air button that offered more control. I can't find it but you might find it of interest if someone can point to it.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Hohner air hole size
« Reply #7 on: September 28, 2023, 10:45:39 AM »


  Might be this one?  Gaillard’s “wedge” (post 2005 or so) sort of floats under your thumb and you can grab a lot of air (opposite of this thread) with a footward movement … or press it in just to slip a bit of air into the Bellows during normal play.

   I showed it to Frans VanderAa in Eindhoven in 2011, who semi-dismantled it!  And came up with his own “new design’ a year later. it is a simple lever, but thicker at the foot aspect, again with “extra play”. and again facilitates excellent control. I think I prefer it now.

   http://forum.melodeon.net/index.php?topic=27623.msg332412#msg332412
Logged
  _       _    _      _ 

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hohner air hole size
« Reply #8 on: September 28, 2023, 11:01:38 AM »


  Might be this one?  Gaillard’s “wedge”...http://forum.melodeon.net/index.php?topic=27623.msg332412#msg332412

That's the one, thanks.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal