Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Melting Reed wax  (Read 1505 times)

0 Members and 1 Guest are viewing this topic.

Ed Rennie

  • Good talker
  • **
  • Offline Offline
  • Posts: 82
Melting Reed wax
« on: October 03, 2023, 07:34:40 PM »

Well, I've been musing about reed wax. Not so much the using of it, or which is the best/least stinky to use etc. More the melting of it. The videos I've seen feature folks with gas burners, which I'm not that keen on.

I've seen electric wax melting pots which are designed for the wax used to rip your hair out, but that wax appears to have a lower melting point. Might the thermostat on those be adjustable, i.e. a good old bi-metallic strip adjusted by a screw, or will it be some dark arts chip thing?

Then I remembered making up media in the Path lab donkey's years ago, using a thermostatically controlled hotplate with a magnetic stirrer. Looked them up and lawks-a-lordy! they're hugely expensive!

So, what to folks use that isn't a gas burner or the stove?
Logged
There's a lot more goodies in the pipeline ...

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Melting Reed wax
« Reply #1 on: October 03, 2023, 07:53:50 PM »

I use wax sticks and a soldering iron on a lamp dimmer to control its temperature.
https://youtu.be/vSztTt1SRAg?si=CipM0Fy6WjYVuAMI&t=1240

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Melting Reed wax
« Reply #2 on: October 03, 2023, 08:03:57 PM »

I got one of these off eBay for about £25
It's by far the best method I've tried.
https://georgeweil.com/dyes-and-assistants/tjantings-wax-pot/tixor-electric-batik-wax-pot/
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Melting Reed wax
« Reply #3 on: October 04, 2023, 09:40:37 AM »

I bought a new girly-pink cosmetic wax melting pot from eBay for about a tenner, iirc. It melts the wax a treat, but being cack-handed, I couldn't get the hang of pouring it at all.

I now use Mr Marshalls wax sticks and a soldering iron. However, being tight, I use a boot sale (ex GPO Telephones) electric iron without an expensive reducer but with a home made tip consisting of a thin piece of copper sheet about 2 inches long. This dissipates the heat to the point where there is no smoke at all but the wax liquifies very quickly.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Melting Reed wax
« Reply #4 on: October 04, 2023, 09:52:15 AM »

And here are my waxing tools.
All home made.
The flat one gets little use since I made the U-section ones from bean tins. The straight one is brilliant for rewaxing Hohner 4 stops.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Ed Rennie

  • Good talker
  • **
  • Offline Offline
  • Posts: 82
Re: Melting Reed wax
« Reply #5 on: October 04, 2023, 10:41:11 AM »

Thanks all, plenty of food for thought. I'll keep you posted :-)
Logged
There's a lot more goodies in the pipeline ...

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Melting Reed wax
« Reply #6 on: October 04, 2023, 01:17:11 PM »

I use a selfmade spatula shaped tip, embossed out of a thick copper cable in combination with a temperature controlled soldering iron.
Or a electric batik tool, wich is a kind of soldering iron wit a pannikin. By now i tend to use a small brush to
"glue" the plates with very little wax first and then solder after fine tuning. That way i can take off individual plates again. Maybe not a real professional method but maybe a good tip for beginners. Remember, old boxes had leather surfaced blocks and the plates were just nailed onto, no wax at all, and it worked also.
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Melting Reed wax
« Reply #7 on: October 04, 2023, 08:58:32 PM »

I got one of these off eBay for about £25
It's by far the best method I've tried.
https://georgeweil.com/dyes-and-assistants/tjantings-wax-pot/tixor-electric-batik-wax-pot/

What diameter nozzle do you use? I tried one, but it kept clogging.

(Now use soldering iron with dimmer.)
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Melting Reed wax
« Reply #8 on: October 04, 2023, 11:29:43 PM »

I got one of these off eBay for about £25
It's by far the best method I've tried.
https://georgeweil.com/dyes-and-assistants/tjantings-wax-pot/tixor-electric-batik-wax-pot/

What diameter nozzle do you use? I tried one, but it kept clogging.

(Now use soldering iron with dimmer.)
I only use it to heat the wax. The tools are in another photo.
I struggled using brushes and soldering irons but the homemade waxing spoons work so much better that it's worth spending time refining the technique.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Melting Reed wax
« Reply #9 on: October 05, 2023, 09:44:27 AM »

...time to built some spoons. But this lead me to following question. Is it ok to reheat the wax several times?
I mean workin with a spoon requires a good amount of liquid wax and you wont exhaust it, right? How do you melt it, on a heating plate?
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal