Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Longitudinal Warped Reedblock = Reed shimmer  (Read 1748 times)

0 Members and 1 Guest are viewing this topic.

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Longitudinal Warped Reedblock = Reed shimmer
« on: October 12, 2023, 06:20:27 PM »

I thought this was worthy of a new topic.  I posted recently re a box having a tinny sound.  I have just found out the cause. It's caused by  longitudinally warped reedblocks.  Simple sanding sorted it in minutes.  The box went from being pretty awful to a full rich sound.

The thing that made me notice was the fitting of lighter valves (thanks for advice).  When I tested the valves on the bench I noticed adjacent valves lifting.  The airflow was travelling down the block.  The effect was a metallic shimmer as adjacent reeds vibrated slightly. 

When I get a minute I will post some pictures.

The box is now getting better and better ..... thanks for all the advice on the other post.

John
« Last Edit: October 12, 2023, 06:23:44 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Longitudinal Warped Reedblock = Reed shimmer
« Reply #1 on: October 12, 2023, 06:31:17 PM »

Some pictures .....
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Craig Simmonds

  • Member
  • *
  • Offline Offline
  • Posts: 40
Re: Longitudinal Warped Reedblock = Reed shimmer
« Reply #2 on: October 13, 2023, 09:48:27 AM »

I was reading your previous thread with interest, very interesting that a warped block caused it, but makes sense! Have you checked the rest of the instrument to make sure there isn't similar warping occuring elsewhere?
Logged
D/G Cairdin, D/G Serenellini Lady

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Longitudinal Warped Reedblock = Reed shimmer
« Reply #3 on: October 13, 2023, 10:47:07 AM »

Checking surfaces for being flat is one of the first things I do when I've stripped a box, simply because if it's too bad to make good, I won't bother carrying on with the rest of it.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Longitudinal Warped Reedblock = Reed shimmer
« Reply #4 on: October 13, 2023, 11:41:25 AM »

Another clue that there is a warped reed block or fondo is if there is black staining on the gasket surface, a result of dust being deposited from the leaking air.
« Last Edit: October 13, 2023, 12:41:58 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Longitudinal Warped Reedblock = Reed shimmer
« Reply #5 on: October 13, 2023, 11:55:53 AM »

Have you been drinking this morning, Theo?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Longitudinal Warped Reedblock = Reed shimmer
« Reply #6 on: October 13, 2023, 11:56:49 AM »

Have you been drinking this morning, Theo?

Just coffee!  Corrected now.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Longitudinal Warped Reedblock = Reed shimmer
« Reply #7 on: October 13, 2023, 12:08:06 PM »

Have you been drinking this morning, Theo?

Just coffee!  Corrected now.
Still not sure where the 'basket surface' is (:)

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Longitudinal Warped Reedblock = Reed shimmer
« Reply #8 on: October 13, 2023, 04:03:07 PM »

Hi, thanks for all the input  (:).   

This reedblock problem has made me realise that it’s pointless trying to get a pure tone on a reed or a box tuned without always making sure that the reedblock/fondo seal is perfect  :D 

The big learning point for me is re how you check flatness.  I have always checked flatness but have only been placing the reedblock on a flat surface and testing for twist by rocking.  You really do need to mark and sand on a flat surface to reveal the high spots (as per the pictures).

From now on I will completely reset the reedblock including the seal. Good news though is that I now sorted and have a waveform that I can work with!

Thanks for all the help/input.  It is very much appreciated.

Craig,  thanks ….. next job is the bass end.

John
« Last Edit: October 13, 2023, 06:46:23 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Longitudinal Warped Reedblock = Reed shimmer
« Reply #9 on: October 14, 2023, 08:15:01 AM »

I have found about 10-20% of the reed blocks in old instruments are warped to some meaningful degree. Twisted,arched what have you. I use coarse sandpaper glued to a sheet of thick shelf glass.
I mark the bottom of the block with a pencil to find the high and low spots.
It is really important to not rock the block in any way while sanding, I typically move the block end to end while sanding.
 Check and shim the block after since it will often sit loose if it is the type that has a heel that slides under a holder in the instrument.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal