Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Adding bass  (Read 1170 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Adding bass
« on: October 27, 2023, 09:09:07 AM »

I leave heavy duty mods, like adding stops and adding extra bass, to others (there is soo much regular repair work to be had I wouldn't have the time (:)…and I don't have a bandsaw etc etc…well thst's my excuse).
Anyway… I do have my wonderful Modell II club box, now with TAM reeds and I may increase the bass to 10 or 12.
What is the procedure for this?  Is it as obvious as: make new (bigger) blocks, replace existing buttons and mech?
Or are the existing blocks/mech modded?
Can someone show some internal pix of an 8 bass that has had (say) two or maybe four bass added?
Maybe there are different ways to achieve this and while my inner computer programmer wants to completely reinvent the idea, as all programmers have done at one time or another, if there is a good/best way to do it I'd like to see how others have done it.
Thanks.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Adding bass
« Reply #1 on: October 27, 2023, 01:37:00 PM »

Possessing, possibly, the skills and tools of a typical shuttering joiner, I'd be very interested to see this also!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Adding bass
« Reply #2 on: October 27, 2023, 03:29:26 PM »

I would also like to add my voice to this.  It something that I would like to try.  I have a Modell I that I would like to mod. Any guidance would be much appreciated.

John
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Adding bass
« Reply #3 on: October 27, 2023, 03:55:08 PM »

I’ve thought about this a great deal and I’ve seen quite a number of examples of other peoples work. Unfortunately  in none of the ones I’ve seen has the person had confidence to sign their work!

There are different possible approaches as Rog has mentioned.

First idea is to take the blocks and mechanism from a 12 bass Hohner.  The retainers for the reed blocks have to be moved, and they are usually glued and screwed so releasing the glued joint is one of the more difficult tasks.
Corona reed blocks are possible but the pattern of vents in the chord block don’t match up with what you would get if you if you make three extra holes at each end of the existing holes,  but you could get round this by removing the reed block sole and turning it over.

Hohner 12 mechanism would fit easily,  you would have to check the length of the pushrods. And you have to drill 4 extra holes for the buttons, 2 at each end.  While you are there I you can also bush the holes for the bass buttons and discard the rather useless green felt washers that Hohner fit under the buttons.

You could also take reed blocks from two 8 bass instruments and cut and fit parts together, you could also add half the mechanism from a second  8 bass instruments and fit them side by side.  (this is the method I've seen used, the result was fully working, but not pretty!)

The second approach is to make new reed blocks, and to make a new mechanism using standard Italian components from Carini.  The parts are cheap, but there is quite a variety of slightly different versions of done parts.

A third method would be to take a bass fondo conplete with blocks and mechanism and transplant it.  I suspect this this would not be quite as straightforward as it sounds.
« Last Edit: October 27, 2023, 03:59:18 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Adding bass
« Reply #4 on: October 27, 2023, 04:50:54 PM »

This might be of help
https://forum.melodeon.net/index.php?topic=25087.0
I've done a few 12 and 14 bass boxes now
And another in similar vein.
https://forum.melodeon.net/index.php?topic=25468.msg303422#msg303422
« Last Edit: October 27, 2023, 05:02:32 PM by Squeaky Pete »
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Adding bass
« Reply #5 on: October 27, 2023, 06:27:48 PM »

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Adding bass
« Reply #6 on: October 27, 2023, 07:19:43 PM »

 Thanks all. This is v interesting. I think I've got the bass mech from a Corona somewhere…Ive certainly got the bass blocks..having got them from Theo.. :||:
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal