Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Toy accordion: bellow corner  (Read 734 times)

0 Members and 1 Guest are viewing this topic.

Manu

  • Member
  • *
  • Offline Offline
  • Posts: 15
Toy accordion: bellow corner
« on: November 04, 2023, 04:45:27 PM »

Hi! I started a new project of toy accordion. I used The reeds of my late chinese 3 row on the original plastic reed block and made a custom wooden one for the basses (waxing was a hell but i made it and now it sounds fine) but i wanted to upgrade the bellow(Eventually add a second toy bellow to enlarge the air capacity) But for now i stripped off the corners and the paper of the original bellow and i encoutered my problem: Is there a way to fit (whitout the right tools; its my first projet) Some 3 row bellow corner on a toy accordion? I'm close to having fun with it but i wont buy new corner or tool for now since its still a silly project for fun. So my second question: if there's no way to fit used bellow corner is there an alternative to patch bellow corners whitout metal corners? I have thinked about bottle caps (XD) or glue but i don't want to ruin it. The originals corners where just plain tape so i dont think it can be worse.. maybe just stapple it then glue it? what do you think experienced accordion maker? i know i sound dumb but we have to start somewhere ;D . Thanks
Logged

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Toy accordion: bellow corner
« Reply #1 on: November 04, 2023, 06:23:32 PM »

If you did decide to buy a tool at some point ... I once paid an eBay seller £7 for a set of rubber-tipped glass running pliers, and it definitely wasn't money wasted. They've since come in handy for all sort of small tasks requiring wide nosed pliers, and they're probably the first things I'd reach for if I ever had to try putting bellows corners back on.
Logged
Vintage Double Ray C#/D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Toy accordion: bellow corner
« Reply #2 on: November 04, 2023, 06:43:03 PM »

I’ve just looked at a Chinese toy melodeon I have here and I’m sure you could fit metal corners.  You need to choose corners with a matching degree of curvature.  If they are secondhand you should open up the gap where the bellows card goes, put in a little pva glue and press into place, then compress gently with a set of wide nose pliers.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Toy accordion: bellow corner
« Reply #3 on: November 04, 2023, 08:19:22 PM »

Due to the fact that I usually buy instruments that need lots of work I often replace corners.
I made a little jig to help punch these back into shape. Just file up a bit of aluminium to the profile you want and a few sharp taps with a hammer and Bob's your uncle.
Needless to say, really tighten up the vice to hold it rock steady and clean all the mush from the inside before you start.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal