Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Factory Tuned Reeds  (Read 1655 times)

0 Members and 1 Guest are viewing this topic.

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Factory Tuned Reeds
« on: November 05, 2023, 04:42:17 PM »

I notice that on original Factory Reeds there are very few tuning marks on the offset (+ and -) reeds. Anyone know if   the offset reeds are machined with the required amount of swing? Thanks in advance.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Factory Tuned Reeds
« Reply #1 on: November 05, 2023, 06:53:55 PM »

New reeds are supplied somewhere close to pitch with no offset. You have to do that bit yourself  :)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Factory Tuned Reeds
« Reply #2 on: November 07, 2023, 02:06:53 PM »

Thank You
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Factory Tuned Reeds
« Reply #3 on: November 07, 2023, 02:22:52 PM »

I've just recieved brand new reeds from HARMONIKAS in CZ republic for a buddy's box. MMM, and they were roughly 10 cents apart despite not asking for it.

I've previously ordered a bunch of MM sets from them, and if it made sense in the order that they were for MM boxes, one voice came with an offset (about 15 cents) despite not asking for it.

If I order say 9 of the same (for 3 MMM boxes) none of them will come with offset.
Logged

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Factory Tuned Reeds
« Reply #4 on: November 07, 2023, 07:01:28 PM »

Interesting. Were the offset reeds machined at +10 cent or had they been re-worked by hand. Thanks
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Factory Tuned Reeds
« Reply #5 on: November 07, 2023, 09:26:49 PM »

i have a set of harmonikas in F / Bb about to use this week. packets are labelled 0 and +...i'll check if they are machined to that and if its a linear offset tomorrow. binci reeds ive used recently were with no offset
Logged

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Factory Tuned Reeds
« Reply #6 on: November 08, 2023, 10:28:41 AM »

Thank you
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Factory Tuned Reeds
« Reply #7 on: November 14, 2023, 09:05:35 PM »

so i just checked and reeds from harmonikas are indeed factory pretune or at least mine are. the "zero" reeds are approx + 10 so will come down when valved and waxed in. the "plus" reeds are approx + 22 but it varies so its all approximate. I'll reset all the zero reeds to A440 once they are waxed in and then adjust the "plus" reeds to get the tremelo im looking for. the pretuning will help a little though. no scratches on reeds or signs of tuning other than factory sanding. maybe they were ordered that way as this particular set i got on ebay for an F / Bb conversion from C/C#.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Factory Tuned Reeds
« Reply #8 on: November 14, 2023, 10:28:45 PM »

When I’ve ordered reeds from Voci Armoniche (through a go-between), they asked what offset I wanted and the reeds arrived pre-tuned (one set at zero, the other +10 cents). Obviously, I still had to tune the reeds in the box but they were fairly close to pitch right from the factory.
Logged
C#/D player

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Factory Tuned Reeds
« Reply #9 on: November 15, 2023, 10:57:22 AM »

Thank you to all for the information.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal