Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Casework repair  (Read 2609 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Casework repair
« on: November 13, 2023, 02:23:04 AM »

I'm looking for suggestions on how I might be able to fix this split in the bass end casework of an old Pre-Corso.  A previous owner had filled the gap between the 'fondo' and frame with wax which, surprisingly, actually worked at preventing air loss.  However, I'd like to actually fix the casework if possible.  I feel like I would need to glue/fasten some kind of support inside both ends of the split (one inside the instrument, and one on the side of the bass pallets), however there wouldn't be much room for anything on the one side due to the bellows frame.  Any suggestions would be welcomed.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Casework repair
« Reply #1 on: November 13, 2023, 07:34:46 AM »

That’s an ugly one!  Pity about the wax as that severely limits your options for using adhesive.
On the bellows side you can make a little more space by reducing the height of the bellows frame over the width of the repair.
Speculative thought — can you peel back the celluloid enough  to cut out the whole damaged/waxed area and replace with a patch of new wood?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Casework repair
« Reply #2 on: November 13, 2023, 09:33:17 AM »

My first thought was exactly the same as Theo .
Wax!
When removing the wax with heat, solvent or scraping, try to angle the body so anything doesn't seep towards an area you want to apply glue.
Probably the strongest part of the repair will have to be in the other side where I hope the wax hasn't contaminated the timber surface.
I assume you will try to pull the end back into shape with a sash cramp or similar so be sure the timber hasn't taken so much of a "set" that the pressure transfers to the long sides, cracks the glue and pings them away from the Fondo. I'd reinforce the long sides before you start, temporarily with clamps or in a vice and permanently with some small rubbed glue blocks.
I suspect you will be doing this a bit at a time as the last job of the day so you can leave any glueing overnight before unclamping and turning over to work the other side.
I had one like this but I left it waxed and looking scabby and it plays a treat.

Edited due to autofill idiocy.
« Last Edit: November 13, 2023, 11:13:49 AM by Squeaky Pete »
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Casework repair
« Reply #3 on: November 13, 2023, 03:31:56 PM »

Would it not be possible to scrap away the old wax, wipe down with mineral spirits (methyl hydrate, acetone, etc) and possibly even sand down the surface a little to allow adhesive to stick to the wood where once there was wax?
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Casework repair
« Reply #4 on: November 13, 2023, 04:10:27 PM »

Possibly, it depends how far the wax has penetrated,   But if it’s into the cracks it’s going to be hard to get the outer side looking flat.  Looking at the photo again you might be in luck, the wax seems to  be just on the  interior.  The cracks look like a job for thin cyanoacrylate  which is excellent for penetrating through a network of cracks. Protect the celluloid in the area with masking tape before gluing and clamping.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Casework repair
« Reply #5 on: November 13, 2023, 04:44:32 PM »

If it's any encouragement, I've recently been clarting about with an old Scandalli melodeon where one of the treble reed blocks had no soleplate and was sealed in with just wax on every part touching the fondo. After scraping the wax off and giving the surfaces a good scrubbing with a cloth repeatedly dipped into acetone, it's come up smashing and taken ordinary PVA (seemingly) perfectly.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Casework repair
« Reply #6 on: November 13, 2023, 10:09:42 PM »

I'd replace the whole side.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Casework repair
« Reply #7 on: November 14, 2023, 04:38:41 AM »

That would be great, but I fear not feasible for us rank amateurs working with less than optimal tooling.
Also, there'd be a lack of fun, challenge and satisfaction for us. (Three of the four reasons why we do it.)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Casework repair
« Reply #8 on: November 14, 2023, 02:13:28 PM »

That would be great, but I fear not feasible for us rank amateurs working with less than optimal tooling.
Also, there'd be a lack of fun, challenge and satisfaction for us. (Three of the four reasons why we do it.)

I think he means just the one side where the split is, not the entire bass side.
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Casework repair
« Reply #9 on: November 14, 2023, 02:28:06 PM »

Im sure you're right there. But for an amateur like me to start messing with celluloid is a step too far!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Casework repair
« Reply #10 on: November 14, 2023, 03:09:28 PM »

Quote
Im sure you're right there. But for an amateur like me to start messing with celluloid is a step too far!

I assumed (maybe wrongly) that Diatonix meant replace the wood panel only. 
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Casework repair
« Reply #11 on: November 14, 2023, 04:26:18 PM »

"replace the wood panel only"

Yes, which would mean removing the wood from the celluloid which is also bent around the two corners and also splitting the two corner joints! An horrific job, even for someone with a lot of experience, and confidence I should imagine.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Casework repair
« Reply #12 on: November 14, 2023, 07:47:53 PM »

"replace the wood panel only"

Yes, which would mean removing the wood from the celluloid which is also bent around the two corners and also splitting the two corner joints! An horrific job, even for someone with a lot of experience, and confidence I should imagine.

No doubt, Edward, but Matt is the one asking for advice, and I should imagine he can decide for himself whether he wants or feels competent to follow Diatonix's suggestion.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Casework repair
« Reply #13 on: November 14, 2023, 11:28:47 PM »

Yes, of course.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Casework repair
« Reply #14 on: November 17, 2023, 05:52:38 AM »

I know it sounds daunting, Winston, but it's actually not that bad.  After trying a few quick fixes (this is my own instrument, not a client's), I decided the only way to do the job right was to replace the entire split panel as Diatonix had suggested.  I was able to separate the one ply that the celluloid was attached to, and removed the rest.  This allowed me to make a new panel and slide it into place, and then close up the box by gluing the celluloid/ply back onto the new panel.  It worked out OK without too much fuss.
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Casework repair
« Reply #15 on: November 17, 2023, 05:53:13 AM »

New panel installed.
Logged
C#/D player

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Casework repair
« Reply #16 on: November 17, 2023, 08:09:54 AM »

Bravo!
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Casework repair
« Reply #17 on: November 17, 2023, 01:48:30 PM »

Good job, and well done!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Casework repair
« Reply #18 on: November 17, 2023, 05:04:42 PM »

Couldn't have done it better myself.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Casework repair
« Reply #19 on: November 17, 2023, 09:28:44 PM »

Admirable work. (:)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal