Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How to repair bowed wood?..  (Read 2036 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
How to repair bowed wood?..
« on: November 18, 2023, 08:17:33 PM »

Hello, firstly sorry that this post relates to a PA that I purchased :|bl, but I thought it might be useful more broadly speaking!.. Anyway it’s this little Mignon II… Well I noticed it was very leaky and on closer inspection I could see that the wood on the back where the bellows joined was somewhat bowed (see pic) causing the air loss. I confirmed this by putting masking tape over the area to see if this stopped the leak, and it did…

I can think of four possible routes to solving this problem… 1: somehow the wood needs to be bent or reshaped into its original form, 2: the wood needs to be removed on that side and replaced by a new piece, 3: the gasket needs to be made thicker in places to compensate for the curve, or 4: the wood needs to be built up somehow to form a flat surface where it joins the bellows.

I have potential access to a reasonable amount of tools but inexperience… I would very much appreciate any suggestions…

Thanks!
Logged
Dancing about architecture since 1997

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How to repair bowed wood?..
« Reply #1 on: November 18, 2023, 09:29:32 PM »

I'd try replacing the gasket. See if that solves the problem.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: How to repair bowed wood?..
« Reply #2 on: November 18, 2023, 10:37:46 PM »

If the bowing is sideways, a wider gasket would help (but your options 3 and 4 make me wonder if the curve is side-to-side or up-and-down).
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How to repair bowed wood?..
« Reply #3 on: November 20, 2023, 11:54:39 AM »

That's not much of a bow, Arnold! If your leak is from there, placing your bellows gasket nearer the edge of the joint should fix it without any problem.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: How to repair bowed wood?..
« Reply #4 on: November 20, 2023, 05:52:45 PM »

Yes, I think you’re right. A little over reaction to the problem on my part perhaps!.. The gasket is ridiculously thin and narrow, so hopefully it’s just a case of getting a new one from somewhere, then the small matter of tuning the reads which are inexplicably around 20c flat on average 🧐 Thanks for your suggestions  :D
Logged
Dancing about architecture since 1997

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How to repair bowed wood?..
« Reply #5 on: November 20, 2023, 05:56:50 PM »

Yes, I think you’re right. A little over reaction to the problem on my part perhaps!.. The gasket is ridiculously thin and narrow, so hopefully it’s just a case of getting a new one from somewhere,
The answer to that is, as ever, Charlie Marshall
Quote
then the small matter of tuning the reads which are inexplicably around 20c flat on average 🧐 Thanks for your suggestions  :D
Probably tuned to old pitch

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: How to repair bowed wood?..
« Reply #6 on: November 20, 2023, 07:00:11 PM »

Didn’t think it would be old enough to be old pitch, but it does have plates the same size as Liliput (narrow) 🧐 Thanks for the link… Which is the safe bet in terms of size though? I’m thinking 7mm x 2mm since I don’t want to have to squeeze too hard to get the thing back together (It seems more delicate than a 1040)… A good size for pokerwork type boxes too?.. Cheers!
Logged
Dancing about architecture since 1997

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: How to repair bowed wood?..
« Reply #7 on: November 20, 2023, 08:50:10 PM »

Didn’t think it would be old enough to be old pitch, but it does have plates the same size as Liliput (narrow) 🧐 Thanks for the link… Which is the safe bet in terms of size though? I’m thinking 7mm x 2mm since I don’t want to have to squeeze too hard to get the thing back together (It seems more delicate than a 1040)… A good size for pokerwork type boxes too?.. Cheers!

Plenty of more modern accordions are tuned to something other than 440 Hz. 
Logged
C#/D player

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: How to repair bowed wood?..
« Reply #8 on: November 26, 2023, 05:41:40 PM »

 This sort of bowing can happen on older instruments on the back. The celluloid has slightly shrunk over half a century, it can actually bend the wood over time.
 The solution I have seen on older instruments has been to add a screw. Drill a tiny hole (about 1/2 the diameter of the threaded screw) all the way through the accordion and frame as if you were adding a new bellows pin. Drill out the hole in the shell to the diameter of the screw shank.
 Carefully tighten the screw and draw the shell back in, heating the celluloid with a hair dryer can help it relax.
 I just had to do this on a 12 bass I restored.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: How to repair bowed wood?..
« Reply #9 on: November 26, 2023, 06:26:20 PM »

You can see celluloid being applied here. I think the trick during application was to not stretch the celluloid at all during application. https://www.instagram.com/p/C0HoIs6vGVJ/
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal