Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Paolo Soprani coupler buttons question  (Read 730 times)

0 Members and 1 Guest are viewing this topic.

John Krienitz

  • Member
  • *
  • Offline Offline
  • Posts: 9
Paolo Soprani coupler buttons question
« on: November 27, 2023, 01:00:24 PM »

Hello, all.  I have a Paolo Soprani from the 50’s (I believe).  It was previously a G/C with stepped keyboard.  John Nolan expertly converted the reeds to C#/D, and I converted to a flat keyboard.  (Thank you, Lars, for the advice). 
There is nothing on the back side of the coupler buttons to engage with the coupler mechanism.  The mechanism works fine, when switched by hand, but the grille has to be off to do this, of course.  Can someone send a photo of the back side of their coupler buttons, so I can see just what needs to be fabricated?  I’m guessing it may just be a simple little arm, but I would love your help, if possible.   
Many thanks,
Damon O’Gan (John Krienitz is the name of the man who made my first fiddle - Kansas, 1912 - I stupidly used it as my username years ago)
Austin, TX
Logged

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Paolo Soprani coupler buttons question
« Reply #1 on: November 27, 2023, 01:26:48 PM »

There are 2 little brass prongs that engage with the coupler mechanism and are screwed into the wood on the back of the coupler switches.
These are easy to make with a tin snips and brass sheet.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

John Krienitz

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Paolo Soprani coupler buttons question
« Reply #2 on: November 27, 2023, 01:34:42 PM »

Thank you so much for the quick and very helpful reply!
I appreciate you, and this entire forum, so dang much. 
Best,
Damon
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Paolo Soprani coupler buttons question
« Reply #3 on: November 27, 2023, 01:35:22 PM »

Here are some photos of a pepperpot. It is GC with stepped keyboard. Only one picture inside but it shows that each prong bracket (L shaped) is held with two screws.

Scott
« Last Edit: November 27, 2023, 01:37:18 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

John Krienitz

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Paolo Soprani coupler buttons question
« Reply #4 on: November 27, 2023, 01:41:38 PM »

Super, thanks a million!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal