Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: New spring bending jig.  (Read 1228 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
New spring bending jig.
« on: November 28, 2023, 05:47:56 PM »

I've been fiddling around with improving my spring bending method.
My old jig worked but there were a lot of things to adjust as I was using it and I wanted a smaller diameter pin for tighter winding.
So here is mk 2.5.
I've posted this on FB too.
https://youtu.be/6yx7PwepbBk?si=Gxh-ZKu3YDMEEB_V
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: New spring bending jig.
« Reply #1 on: June 06, 2024, 10:32:59 PM »

If you google "Coil building for vapes" you end up with a very cheap but very effective spring winding kit that comes with several mandrels in different size (mine came with 6 in 0.5mm increments).
https://www.ebay.co.uk/itm/375044640595?var=0&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338268676&toolid=10044&customid=CjwKCAjwvIWzBhAlEiwAHHWgvX6xN9wfXQ12_-H4M3IVeSiwdTY_FJaW8hW9-Y6MXmhYL8_uyFtMMBoC-tQQAvD_BwE

Once the springs are made, it's quite handy for adjusting their tension too.

I'm hot-rodding an old soviet squeezebox right now, and the treble keyboard tension was 260g per key ( :o).
Dropped it to 120g by making new springs.

My only concern is that after two dozen springs, the alloy housing is looking a bit worn - I wonder how it will look after a hundred or two.
Otherwise, it's £6 well-spent.

« Last Edit: June 07, 2024, 07:33:27 AM by mChavez »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: New spring bending jig.
« Reply #2 on: June 07, 2024, 03:48:39 AM »

V good on both those posts!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal