Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: DIY Tuning Bench Plans?  (Read 3105 times)

0 Members and 1 Guest are viewing this topic.

Elizabeth Moran

  • Either that B-word or that C-word
  • Member
  • *
  • Offline Offline
  • Posts: 42
  • Why, yes, I will have some cheese with that whine.
    • Bookface
DIY Tuning Bench Plans?
« on: December 04, 2023, 07:55:12 PM »

Having been a player and a retailer of Irish button accordions, I now have the time, space and patience to learn how to tune and perform basic maintenance on my beloved instruments. I do not have access to a full woodworking shop, so I am looking for a set of plans that can show me how to put together a basic tuning table, and it could even have an option for a more complex foot powered bellows.  Thanks!
Logged
C#/D Paolo Soprani/Busilacchio MMM
A/Bb Hohner Presswood MM

FS: HoHner Swiss-made Primatona D/D# with Paolo basses with F# push for Finbar Dwyer music.
FS: Paolo Soprani 21/8 LMM B/C 2-coupler, recently revalved, terrific sound.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: DIY Tuning Bench Plans?
« Reply #1 on: December 04, 2023, 09:04:49 PM »

Tuning table: Indispensable tool when it comes to pre-tune single non-valved reeds. But not much more than that.
Tuning bellows: Equally imdispensable tool for fine-tuning reeds in situ (on reed blocks mounted in the instrument)
« Last Edit: December 04, 2023, 09:20:49 PM by diatonix »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: DIY Tuning Bench Plans?
« Reply #2 on: December 04, 2023, 11:07:25 PM »

« Last Edit: December 04, 2023, 11:09:21 PM by Winston Smith »
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: DIY Tuning Bench Plans?
« Reply #3 on: December 05, 2023, 05:47:09 PM »

I can post pictures of the table setup i use. It took me awhile to figure out how to remove the distortion that will cause the table to give different results than reeds tuned in the instrument.
 even so you will get one or two that do not tune true once in awhile and you will have to compensate.
 Mine uses a blower so i have constant flow with a valve (Wood copy of a steam engine D valve) that allows the air flow to be reversed and gives a variation of the pressure. I have a variac that I can use to increase the overall pressure if needed.
  I have a selection of reed blocks that allow me to tune reeds outside the instrument when i am rebuilding instruments with fixed blocks. I make wood adapter plates if I have a reed block with a size outside of my hole selection.
 It turns out that some Russian tuners used a similar setup, there is a picture but no real info in a book i have.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

BoxPlayer

  • Member
  • *
  • Offline Offline
  • Posts: 31
Re: DIY Tuning Bench Plans?
« Reply #4 on: December 13, 2023, 10:03:17 AM »

Tuning Table.
Elizabeth:  The most common tuning ‘table’ is simply a set of bellows (old/worn ones will do so long as they are reasonable air-tight) with two plywood boards fixed to the bellows. The boards are preferably the best quality you can get (eg.marine ply), to avoid distortion and are screwed/glued/ or both to the bellows. One, two or three holes are cut in one of the boards to roughly match the reed holes in reed blocks and the surface can be lined with air-tight felt material to improve the contact. I use three holes to allow me to ‘listen’ to 3 - note musette but two holes will be sufficient in many cases.
I like the hand operated bellows as opposed to those fed with an electric fan because hand operation allows the repairer to ‘feel’ the reeds performance/response/sound which varies greatly from a large/low reed to small/high reed.
You say you have limited woodworking facilities. However I believe the construction of this kind of tuning table is fairly elementary in the scale of wood working projects.
Logged

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: DIY Tuning Bench Plans?
« Reply #5 on: December 22, 2023, 12:56:15 PM »

Here is my second attempt. Quite happy, cheap (made out of a drawer), portable, and the surface can be used as a small working desktop.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: DIY Tuning Bench Plans?
« Reply #6 on: December 22, 2023, 01:40:29 PM »

Here's a link to my foot operated table…made from a school desk. The pivots are door hinges.
Hopefully you can see it…someone tell me if not. The pix are from 2016 and the table still works perfectly.
https://photos.app.goo.gl/9s6Xptn3mSu5oZn47
And some more pix
https://photos.app.goo.gl/qPE8nwfGxzpDyh8G3

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: DIY Tuning Bench Plans?
« Reply #7 on: December 22, 2023, 02:32:05 PM »

...my foot operated table…made from a school desk.

Your table looks to be excessively thick in dimension.
Ideally, it should replicate the thickness of the instrument's fondo.
If you 'coarse tune' reeds; a slim (~3 to 4mm) top would work best.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: DIY Tuning Bench Plans?
« Reply #8 on: December 22, 2023, 03:41:37 PM »

I dunno, it works fine as far as I'm concerned. The trick is to calibrate the air with a known value. We all know that the readings are different to what you get inside the instrument.  But it's easy to work out the offset. And it's used for diagnostics and rough tuning..not tuning and then putting straight into the box. If I'm replacing a reed then I take a reading from a reed that is in tune (normally the other side of a broken reed plate) and tune to that. I can get it to within a cent or two of the required value. Equally if I know the amount I need to shift a reed, it works very for that too. So i don't think the thickness practically speaking makes any difference.
« Last Edit: December 22, 2023, 03:43:42 PM by Rog »
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: DIY Tuning Bench Plans?
« Reply #9 on: December 22, 2023, 04:53:58 PM »

Didn't mean it as a criticism. Just an observation based on personal experience.
Whatever works, I guess! I'd hazard that you tune a lot more reeds than I do.
All's good.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: DIY Tuning Bench Plans?
« Reply #10 on: December 22, 2023, 06:22:01 PM »

Yes..sorry..slightly prickly reply. No offense taken. I do a lot of tuning. In fact the main game changer for me was foot operation. Leaving both hands free.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal