Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Wah-wah resonance issues again  (Read 4733 times)

0 Members and 1 Guest are viewing this topic.

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Wah-wah resonance issues again
« on: December 12, 2023, 11:41:55 PM »

I have a lovely Gaillard Cristal in the shop with wah-wah trouble on one button on the inner row. Mr. Gaillard has done a lovely job of bracing all the blocks together, with a bar on top and bottom spanning all 3 reedblocks, and 2 separate braces each holding two blocks together (pictured). Despite all this, a resonance (WAH WAH) issue still persists.

Removing all bracing seems to alleviate the resonance somewhat on the original problem button, but not completely, and causes a few other lower notes to show issues. I’ve checked the reedblock outside the box and tremolo is fine there. I see no signs of gaps or leaks in the chambers. I’ve tried new bracing in as many places possible, from bracing the blocks against the casing to bracing all 3 blocks together in multiple places.
« Last Edit: December 13, 2023, 12:45:13 AM by komat »
Logged
Too many accordions, help!

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Wah-wah resonance issues again
« Reply #1 on: December 13, 2023, 01:34:16 AM »

Silly idea maybe, but can you try to isolate the problem by removing the 'off' block ?  I mean, for example if the problem note is on the D row, remove the C# MM block.  If the problem is still there, one would think it has to do with the remaining 2 blocks only... 
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Wah-wah resonance issues again
« Reply #2 on: December 13, 2023, 08:55:23 PM »

Which button on the D? Row?
And can you isolate the banks or reeds or tape off one at a time. To see if anything changes.

Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Wah-wah resonance issues again
« Reply #3 on: December 14, 2023, 12:27:48 AM »

I tried removing the C# MM block and the problem persisted. On their own, each note of the problem button sound well and in tune, but when played together the problem persists.
Logged
Too many accordions, help!

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Wah-wah resonance issues again
« Reply #4 on: December 14, 2023, 01:31:26 AM »

When you say each note, I assume you mean each of the 3 reeds? As Michael suggests, you could try the various combinations of 2 reeds to see if one of the 3 is not guilty? Hmmm, is it tuned LM0M+ or LM-M+ ??

You said earlier the M block was OK outside the box, is it still OK in the box with the L block removed ?
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Wah-wah resonance issues again
« Reply #5 on: December 14, 2023, 08:47:14 AM »

I have a lovely Gaillard Cristal in the shop with wah-wah trouble on one button on the inner row.

Have you any recordings of the instrument, demonstrate the problem at its best and at its worst?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Wah-wah resonance issues again
« Reply #6 on: December 15, 2023, 04:20:02 AM »

Removing the L block doesn’t alter anything unfortunately. I’ve had as many as 12 braces installed in total at one point and not an ounce of differentiation. I’ll try and get a recording to show what’s going on.
Logged
Too many accordions, help!

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Wah-wah resonance issues again
« Reply #7 on: December 15, 2023, 06:12:09 PM »

You mean it still does the wah-wah thing with the D MM reedblock alone in the box ??  Maybe something loose/warped or otherwise not quite right or airtight in the mounting of that block, then ?   
Logged

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Wah-wah resonance issues again
« Reply #8 on: December 19, 2023, 12:44:44 AM »

I thought that too. I can’t find anything. I’ve removed the reeds from the blocks, replaced the valves and wax, adjusted gaps, tightened all the screws present in the fondo to eliminate any possibility of gaps between the registers, checked for leaks between the chambers. Nothing. I’m stumped.
Logged
Too many accordions, help!

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Wah-wah resonance issues again
« Reply #9 on: December 19, 2023, 07:35:51 AM »

Does the wah-wah effect diminish if you have either a dry or a wetter tuning?

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Wah-wah resonance issues again
« Reply #10 on: December 19, 2023, 08:28:42 AM »

Please forgive my ignorance, but exactly is a wah-wah effect?
I am guessing that we are not talking about Jimi Hendrix's favourite guitar pedal.

Are you getting a change in beats when 2 voices sound on this note? Does it change when changing volume dynamics?
Logged

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Wah-wah resonance issues again
« Reply #11 on: December 26, 2023, 06:36:54 PM »

I thought that too. I can’t find anything. I’ve removed the reeds from the blocks, replaced the valves and wax, adjusted gaps, tightened all the screws present in the fondo to eliminate any possibility of gaps between the registers, checked for leaks between the chambers. Nothing. I’m stumped.

Hey Ryan, the only other thing I think it could be is "standing wave" interference inside the reed chamber itself. I know that Bertrand switched reed maker from Binci to VA a while back and it could be possible that the new reeds are not optimised to the original chamber design for responsiveness (just a guess - worth confirming with BG).

You might be able to solve the problem by slightly filling the reed chamber with wax until the interference goes away - similar to how we improve the response of piccolo reeds (avoiding the standing wave situation).

I also had problems with a new Galliard I got recently. Reeds were responding poorly and I had to reset the gaps on them all. Not sure if it was due to humidity differences between France and dry Prairies affecting the leather valves? They are certainly sensitive machines.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Wah-wah resonance issues again
« Reply #12 on: December 26, 2023, 07:11:44 PM »

I thought that too. I can’t find anything. I’ve removed the reeds from the blocks, replaced the valves and wax, adjusted gaps, tightened all the screws present in the fondo to eliminate any possibility of gaps between the registers, checked for leaks between the chambers. Nothing. I’m stumped.

Hey Ryan, the only other thing I think it could be is "standing wave" interference inside the reed chamber itself. I know that Bertrand switched reed maker from Binci to VA a while back and it could be possible that the new reeds are not optimised to the original chamber design for responsiveness (just a guess - worth confirming with BG).
[...]

I also had problems with a new Galliard I got recently. Reeds were responding poorly and I had to reset the gaps on them all. Not sure if it was due to humidity differences between France and dry Prairies affecting the leather valves? They are certainly sensitive machines.

Gaps shouldn't move that much on new instruments. They were perhaps not adjusted for every style of playing (or not adjusted from factory, it's possible to order them pre-adjusted).
It's worth giving this feedback to Bertrand, he doesn't do the work on the reeds but would be interested to know about this, especially if it's a recurring issue. He could adjust his designs accordingly.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Wah-wah resonance issues again
« Reply #13 on: December 26, 2023, 09:23:14 PM »

Crazy idea! But, Since you have checked for other problems and you have tried different bracing spots, etc. and removing the bracing helped a bit but caused others issues.
How about isolating the braces themselves with something so it would lock the blocks together but not completely? You could try different materials? Probably a stab in the dark, but would be an easy fix if it worked.

The chamber depth Chris suggests could be another area but most of the boxes I’ve seen are pretty consistent in the mid range ( my limited experience) depth of chambers. Tip of reed / valve not having room at the top of chamber is common. The corso I’m working on has the same depth chamber across the banks and from the top of chamber to bottom of the chamber, all but the last two are altered. The one row I built has a tapered reed bank in both directions no filler.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Wah-wah resonance issues again
« Reply #14 on: December 27, 2023, 10:41:53 AM »

If I understand the problem correctly, you're not getting pitch stability as you increase the dynamics?

My experimenting with variable chamber volume did not show any significant impact of air volume on pitch or pitch stability. A bad choice of chamber volume can reduce volume/responsiveness or completely kill a reed, but pitch (or timbre) does not seem to change much even if you expand the chamber 6-fold. Personally, I would not be in a rush to flood a chamber with wax.

Since the reeds are top quality and work perfectly outside of the box, I'd check for physical interference of valves. Is it push/pull or both ways?
Looking at the photo (could be just camera angle) but reeds 4 & 5 looks to be placed is such a way that the air coming out of one valve might be interfering with the opposite valve on the central block. There might be more reeds with similar issues. That might make these notes go out of tune on louder dynamics on the pull.

Just a thought.
« Last Edit: December 27, 2023, 10:48:23 AM by mChavez »
Logged

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Wah-wah resonance issues again
« Reply #15 on: December 27, 2023, 07:18:43 PM »

In my experience, chamber volume does have an effect on pitch and it becomes more noticeable on the higher notes.

I agree that wax is probably not the best testing method. Maybe try a thin wedge of wood first to see if it helps. Then wax it in as a more long term solution.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Wah-wah resonance issues again
« Reply #16 on: December 27, 2023, 08:33:23 PM »

The box is no longer on my possession as it was returned. I did try altering the reed chamber volume with temporary wooden inserts, but to no avail. Lars had also mentioned bracing/anchoring the two angled bars used as bracing on both ends of the blocks but again, no luck  :(
Logged
Too many accordions, help!

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Wah-wah resonance issues again
« Reply #17 on: December 27, 2023, 11:05:22 PM »

Maybe it's the fondo/faceplate that needs stiffening ?

Just a(nother) thought.
Logged

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Wah-wah resonance issues again
« Reply #18 on: January 05, 2024, 03:41:06 PM »

It had an aluminum fondo that looked like a standard Italian make offered by Carini, with register slides built in. It had multiple screws across the board and I tightened them all as much as I could. Nada. This will forever haunt me.
Logged
Too many accordions, help!

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Logged
too many boxes...please buy one, or two, or
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal