Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: metallic 'ring/rattle' from reed  (Read 1061 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
metallic 'ring/rattle' from reed
« on: December 18, 2023, 05:29:33 PM »

I often come across this issue on older, pre-war accordions; many of the reeds in the instrument will have a metallic 'ring' or 'rattle' when they are sounded.  In the past I have found that this is sometimes caused by the rivet needing to be re-tightened, the tongue needing re-aligning in its opening, or sometimes even the edges of the tongue needing to be lightly sanded down to correct for any abberations in the metal that may be making contact with the plate.  Other times I can do all of the above and still have this issue:

https://www.youtube.com/watch?v=2werou86fgk

(and yes, the wax and valves are old and will all be changed, but this is not the cause of the issue as it occurs with or without valves, on and off the block)

On this particular instrument, it's easily half of the reeds in the lower to mid-pitch range (the smaller, higher-pitched reeds don't usually have this issue) that are affected.

UPDATE: I’ve managed to mitigate the issue after extensive re-aligning of the reed tongues. It seems that the issue must be caused by contact, however small, of the tongue with some part of the reedplate itself.
« Last Edit: December 18, 2023, 06:13:43 PM by mselic »
Logged
C#/D player

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: metallic 'ring/rattle' from reed
« Reply #1 on: December 19, 2023, 01:18:48 AM »

Glad to see you got it sorted!
Logged
Too many accordions, help!

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: metallic 'ring/rattle' from reed
« Reply #2 on: December 19, 2023, 10:13:18 PM »

funny! I had the same experience today, workin on an old Hohner "Laurel Leaf" from the 40ies (i guess) and two plates had the same rattling noise problem. I could swore while inspecting the reedplate against the light there was no chance that the reed could ever touch the frame, but a little pushing the reed sideways solved the problem. Anyway, mysterious things are going on out there, we all know the situation when a few "plucks" with the feeler will cure a stuck reed without understanding the root of the problem.
Some say its dust but even under an incident light microscope i could not see any reason for such reeds to behave strange. Its just like they need to command some attention to fullfill their duty as we might all do.
sorry for my poor school english.  ::)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal