Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: An irritating problem  (Read 4397 times)

0 Members and 1 Guest are viewing this topic.

Julian S

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1628
  • D/G Pastourelle 2, Dony, Pokerwork, G/C Pariselle
An irritating problem
« on: December 28, 2023, 11:58:05 AM »

Whilst playing 'Christmas Day I'da Moarning' on the appropriate day up in Scotland I noticed a problem with the A chord on my  D/G Pastourelle. Only one reed sounding when thirds out.
So back home this morning, gave an experimental pull on the chord, both notes now sounding but definitely not right.

On investigation, I find a plastic type valve has dropped off. An easy problem to fix if I took the reed off, cleaned off the old (brownish) glue and reglued the old valve. Easy in theory as I am pretty cack handed these days !

Hopefully I can just heat a knife blade and ease the reed out - and replace it without needing rewaxing (don't want to bother buying the wax for just one reed).
But what is the best glue for the job ? I see mentions of UHU solvent free in previous discussions but any advice would be appreciated.

Julian


Logged
Old Bones Dance Band

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: An irritating problem
« Reply #1 on: December 28, 2023, 12:11:05 PM »

I always use a contact adhesive, the type with solvent.  Various brands available.  I’ve used manly Bostik but currently using an Italian brand sold by Carini for valves.  The information on the tube says it’s designed for leather work.
BTW for replacing occasional inner valves I find it’s possible to fit them with the reed on the block using a pair of fine nosed tweezers and a thin pointy tool to manoeuvre  the valve.  You need a good light too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Julian S

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1628
  • D/G Pastourelle 2, Dony, Pokerwork, G/C Pariselle
Re: An irritating problem
« Reply #2 on: December 28, 2023, 12:19:30 PM »

I always use a contact adhesive, the type with solvent.  Various brands available.  I’ve used manly Bostik but currently using an Italian brand sold by Carini for valves.  The information on the tube says it’s designed for leather work.
BTW for replacing occasional inner valves I find it’s possible to fit them with the reed on the block using a pair of fine nosed tweezers and a thin pointy tool to manoeuvre  the valve.  You need a good light too.

Thanks Theo - just been scraping off the inner glue and thinking tweezers might be just the answer. And a head torch perhaps.

Do you use the same glue on plastic and leather valves ?

Julian
Logged
Old Bones Dance Band

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: An irritating problem
« Reply #3 on: December 28, 2023, 12:31:06 PM »

Yes, same glue. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: An irritating problem
« Reply #4 on: December 29, 2023, 12:32:42 PM »

another vote here for contact adhesive for leather valves. i also use the brand carini supply but have also found bostik and evo stick to work. For plastic valves i used to use bostik solvent free but since its no longer available have settled on uhu solvent free. when this subject was discussed on this site a few years ago several contributors suggested contact adhesive wasn't suited to plastic valves so i've avoided it. I did a test a couple of months ago when i ran out of UHU and indeed found that my contact adhesive and my plastic valves dont get along well....it caused the valves to curl and distort. The test i did was on hohner valves. Maybe other makes of plastic valves are happy with contact adhesive or i got a particularly vulnerable batch.
Logged

Julian S

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1628
  • D/G Pastourelle 2, Dony, Pokerwork, G/C Pariselle
Re: An irritating problem
« Reply #5 on: December 29, 2023, 12:40:55 PM »

Mm - just bought a tube of Evostik contact. Perhaps I'll do a test run on an old reed and valve just to be on the safe side...

Julian
Logged
Old Bones Dance Band

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: An irritating problem
« Reply #6 on: December 29, 2023, 05:20:40 PM »

I’ve only ever used Evostik contact adhesive for valves, both leather and plastic. Never had a problem and I’ve done hundreds of them.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: An irritating problem
« Reply #7 on: December 29, 2023, 10:55:17 PM »

i was in workshop today so did a few more tests. carini bostik super chario caused major distortion of hohner valves (honner punched valves in various sizes) . other plastic valves (non hohner) relatively unscathed though some distortion to top layer of double and triple layer valves. Evo stick impact multi purpose (red tube) and bostik contact adhesive clear glue (blue tube) also distorted hohner punched valves. Hohner ventil kleber TA16002 didnt affect valves (not sure if its solvent free as tube doent say but it smells like its solvent based). So i dont know. All i can say is with hohner punched valves i'll be using solvent free and have hohner non punched valves on order and will test those before i choose my glues.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: An irritating problem
« Reply #8 on: December 30, 2023, 08:08:46 AM »


i was in workshop today so did a few more tests. carini bostik super chario caused major distortion of hohner valves (honner punched valves in various sizes) . other plastic valves (non hohner) relatively unscathed though some distortion to top layer of double and triple layer valves. Evo stick impact multi purpose (red tube) and bostik contact adhesive clear glue (blue tube) also distorted hohner punched valves. Hohner ventil kleber TA16002 didnt affect valves (not sure if its solvent free as tube doent say but it smells like its solvent based). So i dont know. All i can say is with hohner punched valves i'll be using solvent free and have hohner non punched valves on order and will test those before i choose my glues.
I use Evostick impact multi purpose (red tube) for all my valve work including punched Hohner valves. It only causes distortion if I use too much adhesive. Fixing valves only requires, in my experience, a small wipe of adhesive. I have my glue tube mounted in a small modelling vice with the nozzle pointing straight up, I can then  squeeze the tube to get a small bubble of adhesive at the tip and then i wipe the valve through bubble to apply gthe adhesive and the apply the valve making sure to press it well in place to displace any excess of adhesive.

Julian S

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1628
  • D/G Pastourelle 2, Dony, Pokerwork, G/C Pariselle
Re: An irritating problem
« Reply #9 on: December 30, 2023, 08:53:02 AM »

I did a test run using Evostik red tube and for comparison '151' all purpose contact (no idea what we used that for previously!). Both seemed ok on an old Hohner plate and valve.
The jury is still out - haven't put the box back together yet, but I managed to reglue the valve without taking the plate out. Definitely fiddly - but because it was the inside I probably used less glue anyway.
The proof will be in the playing later...

Julian
Logged
Old Bones Dance Band

Julian S

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1628
  • D/G Pastourelle 2, Dony, Pokerwork, G/C Pariselle
Re: An irritating problem
« Reply #10 on: December 31, 2023, 10:11:37 AM »

Pleased to report complete success with Evostik red tube, helped by tweezers, various lights and torches, and a modicum of swearing.
Thanks to all !

Julian
Logged
Old Bones Dance Band

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: An irritating problem
« Reply #11 on: December 31, 2023, 11:10:22 AM »

Does anyone have experience of CGM valve adhesive?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: An irritating problem
« Reply #12 on: December 31, 2023, 11:40:48 AM »

"Does anyone have experience of CGM valve adhesive?"

It's listed as "Genuine Hohner", which I've been using for a few years. Like most of the glues I've used; it's horrible messy stuff. I was previously using a superglue, which I found much easier and less messy to apply, only changing to this stuff after reading disparaging remarks on here, about using superglues. I don't seem to have had any problems with the valves perishing or coming off with either method, though.

Mind you, I've never clarted about trying to fit 'inside' valves whilst the plate is still in situ. The plate is off the block for me.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: An irritating problem
« Reply #13 on: December 31, 2023, 11:52:38 AM »

I've never clarted about trying to fit 'inside' valves whilst the plate is still in situ. The plate is off the block for me.

Do people really do that? Looks like keyhole surgery of the highest order.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Julian S

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1628
  • D/G Pastourelle 2, Dony, Pokerwork, G/C Pariselle
Re: An irritating problem
« Reply #14 on: December 31, 2023, 12:11:34 PM »

I've never clarted about trying to fit 'inside' valves whilst the plate is still in situ. The plate is off the block for me.

Do people really do that? Looks like keyhole surgery of the highest order.

 I managed it - beginners luck perhaps. Though holding a torch in my teeth was admittedly a tad hazardous... ::)

Julian
Logged
Old Bones Dance Band

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: An irritating problem
« Reply #15 on: December 31, 2023, 01:33:26 PM »

Does anyone have experience of CGM valve adhesive?


I tried a tube once, very expensive and no better than Evostik Impact. Left unused for a few months most of it went off in the tube and was wasted, that's has never happened to me with Evostik and I've had the same tube for a few years now.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: An irritating problem
« Reply #16 on: December 31, 2023, 04:44:54 PM »

What I wish I could get my hands on is "Genuine Hohner" wax; that stuff seems to stay soft forever, unlike most wax from Italian boxes which seems to degrade quickly (I've found that wax in Italian-made boxes can get hard in as little as a few years!)

I experimented heavily with various adhesives for valves.  I wanted to avoid glue fumes if at all possible.  I found that solvent-free adhesives generally don't work nearly as well as their solvent-based counterparts, and I wouldn't trust their strength to hold over time.  Superglues also tend to be more runny than you want, and run the risk of contaminating the underside reeds (ask me how I know...).  I tried ordering the adhesives for valves from Carini, but they said they were not permitted to ship solvent-based adhesives to Canada due to the guidelines set out by the airlines that would be carrying the products.  They sent a solvent-free UHU glue, which did not work well at all.  For the last few years I've been using a solvent-based contact adhesive available here in Canada that is excellent, but it does require proper ventilation due to glue fumes.  These days I do both reed waxing and gluing of valves over a fan and wear a respirator with the proper cartridges.  My lungs are just too sensitive without it.

I've done keyhole surgery for valves, but I generally don't as I find it far too frustrating!  Also, if an inside valve has fallen off one reed, there's a very good chance that the others are ready to drop, too...
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: An irritating problem
« Reply #17 on: December 31, 2023, 05:14:46 PM »

"Superglues also tend to be more runny than you want"

Have you tried Gorilla 'Gel' Superglue, Matt? A dab on the end of a pointy stick is really controllable.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: An irritating problem
« Reply #18 on: December 31, 2023, 07:22:45 PM »

Does anyone have experience of CGM valve adhesive?


I tried a tube once, very expensive and no better than Evostik Impact. Left unused for a few months most of it went off in the tube and was wasted, that's has never happened to me with Evostik and I've had the same tube for a few years now.
I just went to use some I had from not that long ago ( a year maybe) and it is pretty much unusable.
I was thinking about ordering more but may look for something else.
"Superglues also tend to be more runny than you want"

Have you tried Gorilla 'Gel' Superglue, Matt? A dab on the end of a pointy stick is really controllable.
I think the problem with super glue is that it would be hard to clean in the future, gel or not.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: An irritating problem
« Reply #19 on: December 31, 2023, 11:36:22 PM »

In my experimentations, I've often had to remove valves which I've damaged and which have been stuck on with Superglue. It's no problem.
Actually I scrape my reedplates in the normal course of playing with them anyway, as I just don't want to wait whilst they soak in acetone or whatever. I do use acetone, or lighter fluid, on a rag to remove unwanted bits of stray wax etc, though.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal