Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Plastic Tabs on Reeds inside Hohner Pokerwork  (Read 1325 times)

0 Members and 1 Guest are viewing this topic.

Dustin Coffey

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • GC and DG Hohner Pokerwork
Plastic Tabs on Reeds inside Hohner Pokerwork
« on: December 29, 2023, 03:22:40 AM »

Hello,

Thank you for your time. Anyone know how important the plastic tabs are on the reeds? This is regarding a CF Hohner melodeon made in the Democratic Republic of Germany. I got it on Craigslist and am fixing some issues and some of these tabs with the yellow square have fallen off.

I put the electrical tape in to hold two reeds in place that were loose on the inside. They are held in by wax and I didn’t feel comfortable melting wax in there.

Thank you!
Logged
Playing Hohner Pokerwork since November 2023. Thanks for all of your help while I grow in my playing and knowledge of melodeons.

WestOz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: Plastic Tabs on Reeds inside Hohner Pokerwork
« Reply #1 on: December 29, 2023, 07:17:12 AM »

Dustin
The plastic tabs are valves, and vital, especially on the lower notes.
Waxing is the only way to go to hold in the reeds. Not hard to do - search for info on this site.
Logged
Castagnari Dony, DB Binci, Hohner Pressedwood,  Liliput, Preciosa,Octoput,etc.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Plastic Tabs on Reeds inside Hohner Pokerwork
« Reply #2 on: December 29, 2023, 08:58:30 AM »

Correct procedure: All reeds must be taken off the block and without valves cleaned in an acetone bath (to eliminate wax and glue residues).  Reed blocks must be cleaned of old wax. Reeds (with new valves) are then waxed in with new wax, a process which, by the way, is far from being as easy as suggested by WestOz (unfortunately, re-heating old brittle wax with a soldering seems to be common practice and I can only say: it doesn't work). My advice would be to leave all this to an expert, not least due to the inevitable tuning involved at the end.
Whether a low-quality East German melodeon justifies the price tag is a different question.
« Last Edit: December 29, 2023, 09:08:21 AM by diatonix »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plastic Tabs on Reeds inside Hohner Pokerwork
« Reply #3 on: December 29, 2023, 09:30:30 AM »

If it’s made it  German Democratic Republic it is very unlikely to be a Hohner.  It might look like a Hohner but there were a lot of Hohner lookalikes made in the GDR which are much lower quality than Hohner.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Matt T

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Plastic Tabs on Reeds inside Hohner Pokerwork
« Reply #4 on: December 29, 2023, 10:29:11 AM »

The bit of decoration visible seems to match this Weltmeister https://reverb.com/item/33389046-vintage-weltmeister-2-row-diatonic-button-accordion-melodeon-g-c-vienna-style.  Is this the instrument model?

Matt
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plastic Tabs on Reeds inside Hohner Pokerwork
« Reply #5 on: December 29, 2023, 11:12:37 AM »

Agreed Matt it could be that model.  And even though that one is described as a Weltmeister I can’t see a brand name anywhere.  In my experience the GDR pokerwork lookalikes with no brand name are a very mixed bag in terms of quality ranging from ok to almost unplayable.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Plastic Tabs on Reeds inside Hohner Pokerwork
« Reply #6 on: December 29, 2023, 11:39:45 AM »

Hello Dustin, welcome.

As already said, the "plastic tabs" are valves. Melodeon reeds have two reeds on each block. The valves allow one reed to sound on the push, while the other is muted  and the other to sound on the pull, while the first is muted.
you can only see half of these.The other valves are on the underside of the blocks, out of sight.

I suggest you take a look at Lester Bailey's excellent "Hot Rod Your Hohner" videos to get an idea of how these instruments are put together and what might be involved in working on them. Your instrument is not a Hohner, but it will be enough like one for these to be very useful.

https://sites.google.com/view/lesterbailey/home

There is a pinned post in " Instrument Design, Construction and Repair " which links to Lester info
« Last Edit: December 29, 2023, 12:27:00 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Dustin Coffey

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • GC and DG Hohner Pokerwork
Re: Plastic Tabs on Reeds inside Hohner Pokerwork
« Reply #7 on: December 29, 2023, 05:59:32 PM »

Thank you all so much,

I really appreciate your help. Also, thank you for pointing out it’s not a Hohner. It looks just like my Hohner GC and I didn’t even notice it doesn’t say Hohner.
Logged
Playing Hohner Pokerwork since November 2023. Thanks for all of your help while I grow in my playing and knowledge of melodeons.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal