Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: What should I do with this box?  (Read 1551 times)

0 Members and 1 Guest are viewing this topic.

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
What should I do with this box?
« on: January 09, 2024, 07:38:36 PM »

I just acquired a Venezia (Hohner) box in the rather odd key of H/E (B/E I assume). The bellows would need some work or replacement (there's daylight poking through the folds closest to the frames), the corner supports had come off, but other than that, the body of the instrument is in good shape. Steel bellows corners, steel case corner protectors too.

It would need a bit of reed cleaning I reckon, as well as be brought up to modern pitch (EDIT: It's already A=440hz... Weird for the age and condition), re wax and revalve, re pad the paddles, gaskets etc. the whole restore process really. But interestingly enough the B/E set are H reeds on aluminum plates, pinned and waxed onto the reed blocks.

The bellows have internal mounts instead of pins, so you can access the bolts from either casework and unscrew them. I thought that was interesting.

Anyway, I'm in a spot of quandary now. I play semitone boxes, mostly B/C, so I'd considered maybe this could be converted from B/E, but I don't know how practical/possible that would be. Should I part it out, sell the whole thing as is, or invest in having it restored. Would it be worth just restoring the box as a B/E and selling it instead? I don't know if I've ever seen people actively hunting for B/E boxes, mostly Bb/Eb from what I've seen.

Again, structurally speaking it's in good shape and cosmetically it's still attractive (pokerwork sort of pattern). It could be really nice restored, but if I could make this work as a B/C box, or C#/D (might be easier to lower the E to D rather than E to C?), that would be very interesting indeed.

Please let me know what you think. I love hohners H reeds on Zinc plates but I have no idea how these aluminum ones might sound and am very very curious. Thanks in advance!
« Last Edit: January 09, 2024, 07:54:10 PM by Ross Dubois »
Logged

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: What should I do with this box?
« Reply #1 on: January 09, 2024, 10:54:55 PM »

imo it depends on the bellows, making a new one is not worth it and to repair them is quite difficult. (beside replacing the kaliko).
I guess the leather corners are defective? Why dont you post some pics?
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: What should I do with this box?
« Reply #2 on: January 09, 2024, 11:03:20 PM »

I made a BC from a thrashed BE box. Having the B row is super handy and C rows are plentiful. Then find some donor BC or GC basses. Probably not much interest in a restored BE box but I could be wrong.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: What should I do with this box?
« Reply #3 on: January 09, 2024, 11:16:40 PM »

I bought one a while back and was thinking of converting it, and I’m glade I didn’t.
Mine sounds great ( I believe Dix reeds ).
http://forum.melodeon.net/index.php?topic=29289.0
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: What should I do with this box?
« Reply #4 on: January 10, 2024, 04:37:55 AM »

I’d be interested in the B/E reeds if they were to become available! :)
Logged
Too many accordions, help!

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: What should I do with this box?
« Reply #5 on: January 10, 2024, 03:00:58 PM »

Thanks for the replies!

Bellows repair isn't the worst, but it always comes back down to how much time I have and whether it's better to spend the money having someone else do the work or have patience and work slowly over a long period of time.
You can see the worst of it on the back, up near the frames. It's split there. The bellows would need a fair amount I reckon, but again, depends on time and value or new bellows costs.
 
Besides, replacement bellows aren't *too* expensive in the grand scheme of things, it just depends on the box and project value. This could be a nice accordion if it was tuned to a system I could benefit from. The reeds sound lovely, and I assume this is an early Hohner, closer to the 1930s perhaps, so I'm confused as to how these H reeds are on aluminum plates given the age. I thought aluminum versions became more common around the 50s, and it doesn't otherwise look like this box ever had work done on it at all.

Komat: if I decide to sell them unmodified I'll bear you in mind for sure. If it's in the cards to have these potentially converted to C#/D or B/C or even C/C#, I might go that route instead.

Anywho, here's some photos. I can share more if there's interest.
It might just turn out that I'll be a good parts box, the reeds are all there and in good shape overall






« Last Edit: January 10, 2024, 03:14:18 PM by Ross Dubois »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: What should I do with this box?
« Reply #6 on: January 10, 2024, 03:22:46 PM »

Those bellows just look as if they need retaping, a tedious but not difficult procedure.


https://www.youtube.com/watch?v=UhdyuQ9AMsg

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: What should I do with this box?
« Reply #7 on: January 10, 2024, 03:34:48 PM »

Thanks Ross! :)
Logged
Too many accordions, help!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: What should I do with this box?
« Reply #8 on: January 10, 2024, 04:50:12 PM »

The reeds sound lovely, and I assume this is an early Hohner, closer to the 1930s perhaps, so I'm confused as to how these H reeds are on aluminum plates given the age. I thought aluminum versions became more common around the 50s,

It's true aluminium versions did become more common later on but it's not that unusual to find some in earlier boxes.  For example it's quite common to find Al plates for the left hand reeds in Liliput and Preciosa and other models.  I can speculate that to begin with zinc was cheaper, so Al was only used where the weight saving justified the extra cost, later on the price balance changed and Al became the norm.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: What should I do with this box?
« Reply #9 on: January 12, 2024, 02:49:52 PM »

Those bellows just look as if they need retaping, a tedious but not difficult procedure.


https://www.youtube.com/watch?v=UhdyuQ9AMsg


They don't look too bad, but the split at the first hinged section might prove a little tricky.

Speaking of the bellows, I was comparing this to my double ray from the same era and notice that the actual space the treble and bass cabinets take up are significantly reduced when compared to the double ray. But looking closer, it seems the space that is reduced is compensated for by the bellows frames which are much thicker. The two accordions next to each other look identical in height, so it seems like the main difference is the bellows mounting system. They can make the cabinets shallower if you have no pins and an internal bellows attachment system,  or they can be larger and have a conventional pin system.

Ive noticed people tend to mod the old hohners bass cabinets from time to time, reducing the overall length to a more weildy size, so it had me wondering about the reasons for these two size differences.

The reeds sound lovely, and I assume this is an early Hohner, closer to the 1930s perhaps, so I'm confused as to how these H reeds are on aluminum plates given the age. I thought aluminum versions became more common around the 50s,

It's true aluminium versions did become more common later on but it's not that unusual to find some in earlier boxes.  For example it's quite common to find Al plates for the left hand reeds in Liliput and Preciosa and other models.  I can speculate that to begin with zinc was cheaper, so Al was only used where the weight saving justified the extra cost, later on the price balance changed and Al became the norm.

Ah fascinating. That sounds logical for sure. The costs of materials and production reducing as time passes and those services became more economical or practical. It's very interesting to see that progression of time represented in these instruments
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal