Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Tango III worth saving?  (Read 3073 times)

0 Members and 1 Guest are viewing this topic.

Johan Halmén

  • New Starter
  • Offline Offline
  • Posts: 3
Hohner Tango III worth saving?
« on: January 11, 2024, 08:14:54 AM »

I'm working on a completely different instrument, a barrel organ with flue pipes. I was searching for an accordeon wreck, thinking I could use the bellows as a reservoir for the barrel organ. So I found this Hohner accordeon. I got it for free, because it really seemed to be a mess. The melody keyes get stuck. The treble side stops are even more stuck. So I opened it and detatched the bellows, which seem pretty perfect for my project.
But now I started to think whether there is any value in trying to restore the accordeon, instead of reusing the bellows and scrapping the rest. It's a Hohner Tango III M, with a serial number of 24744 printed on the bass side on several parts. The treble part has the number 13017. Then there's a pencil written number 301808 on the bass side. According to a table found on this forum, the accordeon might be from the 1930's.
As might appear from the images, the melody keyes are stuck against the edge bar next to them, which seems bent towards them. Only the middle keyes are stuck. The bar might have become bent due to moist or bad storage. And the stop shifters seem to be stuck due to heavy oxidation or corrosion of the metal plates pushing and pulling the stop keys.
I have no interest in actually restoring it to a working instrument. I have another very similar, Russian accordeon, which is enough for my personal needs. I only hesitate to actually scrap the essential parts of this 90 years old piece. But I got it for free, while cheap bellows might cost 60 €. What do you think?

« Last Edit: January 11, 2024, 08:16:38 AM by Johan Halmén »
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Hohner Tango III worth saving?
« Reply #1 on: January 11, 2024, 08:43:08 AM »

Hello.

In my humble opinion it does not look pre-ww2 and unlikely to be 90 years old, imho.
Looks like just a cheap and cheerful beginner model. Nothing particularly wrong with it, but also nothing remarkable and the cost of restoring it will greatly exceed the value of the final product.
There's thousands of similar boxes slowly rotting away in attics. Destroying one for a good cause is unlikely to cause severe damage to world cultural heritage.

Going by the photos, it's not in too bad a shape...

Having said that, it's probably better than a Russian accordion, as those things are notorious for being created with the sole purpose of being unplayable to make people switch to the communist-approved state-promoted bayans instead. (Of course unless you have a Jupiter or an AKKO, which are world-class instruments)

PS It might be worth checking the reeds...Looks like the default ones might be a mix of the unremarkable H and T types, but a quick google revealed a Tango with tipo a mano Bugaris inside it (wow). Those are generally considered to be very good reeds.
« Last Edit: January 11, 2024, 09:49:34 AM by mChavez »
Logged

Johan Halmén

  • New Starter
  • Offline Offline
  • Posts: 3
Re: Hohner Tango III worth saving?
« Reply #2 on: January 11, 2024, 10:05:16 AM »

Yes. H and T are marked at the bass side reeds. They seem to be ok, but I still have no usr for them. I might however save them. Like the rest of the parts. They might be a part of a future automatic organ. I have already an automatic reed organ.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Hohner Tango III worth saving?
« Reply #3 on: January 11, 2024, 10:56:34 AM »

You are a mad man.  :||:
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Tango III worth saving?
« Reply #4 on: January 11, 2024, 11:07:12 AM »

Tango was a long lived Hohner brand of various size piano accordions.  In 2004 Hohner published a book that includes a table of models and dates compiled from sales literature in the Hohner museum.  This lists various Tango models produced between 1935 and 1995.  The book mentions that the list is incomplete and production may have been for longer periods.  The M model variants seem to have been introduced after WW2, and in yours the treble grill is clearly a 1950s or 60s design.
These were mass produced instruments for which there is really no market nowadays so you need not have any worries about using parts for other projects.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Johan Halmén

  • New Starter
  • Offline Offline
  • Posts: 3
Re: Hohner Tango III worth saving?
« Reply #5 on: January 11, 2024, 12:20:13 PM »

Quote
These were mass produced instruments for which there is really no market nowadays so you need not have any worries about using parts for other projects.

Good to know. I've seen similar Hohner accordeons for sale, where they ask some 1500 € for them. Either they have no clue or the models are really something special. So, the bellows will have a new life in my barrel organ, while the rest, reeds and keys and whatnot, kindly wait for any future project.

An ideal reservoir of a pipe organ or barrel organ will remain the same pressure no matter how much it extends. This is not the situation with accordeon bellows. The bellows I picked from this Hohner was very stiff, due to years of storage. A lot of stretching made it more flexible, but there's still a slight spring effect, which will cause the pressure to rise the more it gets extended. A counter spring (steel spring inside the bellows) might even out the pressure enough. Don't know yet.

Quote
You are a mad man.

You know me from somewhere?  (:)
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Tango III worth saving?
« Reply #6 on: January 11, 2024, 03:07:47 PM »

Hohner Verdi and Tango models are pretty much the same in different skins and have been standard models for years as Theo says, and the III and IV should be LMM.
The M usually means you have all the register changes on buttons on the front rather than switches on the back of the right hand side.
I buy these whan I see them cheap enough as they are a great source of reeds, pallets, screws blocks etc.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Hohner Tango III worth saving?
« Reply #7 on: January 11, 2024, 07:13:14 PM »

I have a hofbaur tanzibar self playing accordeon that has Hohner reeds through out. I have tried to sell it on here once no interest but the constant pressure of a barrel organ type bellows will present no problem with the sounding of these reeds so long as the maths as regards volume is correct.
Logged
Mark Taylor
Folkloristmark
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal