Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed Scratcher Improvisation Suggestions?  (Read 2979 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Reed Scratcher Improvisation Suggestions?
« on: January 14, 2024, 01:45:09 PM »

Tools available to me at present are pliers and a tuning app on my phone. No jigs. Nothing else.
Suggestions for a make do reed Scratcher to use for reeds in the 1040 requested.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Reed Scratcher Improvisation Suggestions?
« Reply #1 on: January 14, 2024, 02:17:36 PM »

A small twist drill.  Stone the blunt end flat, hold from the drill end..  Maybe drill a dowel for a handle.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Reed Scratcher Improvisation Suggestions?
« Reply #2 on: January 14, 2024, 07:31:34 PM »

I’ve used the drill bit scraper method myself to tune a 1040 with some success (although I went to someone else with the tools to grind it down first!)… I would add that the handle needs to be as thin as possible to get the most acute angle possible to the reed. I actually just used some electrical tape wrapped around the drill bit for a handle. It’s a fiddly job, which I made more fiddly by taking the offset down to 12 cents at middle A (next time I’d probably go for about 16 cents…)
Logged
Dancing about architecture since 1997

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Reed Scratcher Improvisation Suggestions?
« Reply #3 on: January 14, 2024, 07:54:40 PM »

Mine are worn round files that were cut above the grinding part. I think they're around 2 mm in diameter.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Scratcher Improvisation Suggestions?
« Reply #4 on: January 14, 2024, 07:56:31 PM »

I actually just used some electrical tape wrapped around the drill bit for a handle.

Heat shrink sleeving works well for this if it's something you can get hold of.  It is easier to fit and longer lasting than electrical tape.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed Scratcher Improvisation Suggestions?
« Reply #5 on: January 15, 2024, 12:20:16 AM »

Obviously, you're away from base; so it's any port in a storm.
I would ask around to see if there's somewhere that I could buy a small hi-speed drill, or if anyone had a broken one. If it ended up being a good'un, then I'd snap it and hold the smooth shaft to scratch with the broken part.
Not ideal, but needs must!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Reed Scratcher Improvisation Suggestions?
« Reply #6 on: January 15, 2024, 11:29:01 AM »

I actually just used some electrical tape wrapped around the drill bit for a handle.

Heat shrink sleeving works well for this if it's something you can get hold of.  It is easier to fit and longer lasting than electrical tape.

Might try that next time, the electrical tape keeps slipping off!.. Another thing I thought about trying, is cutting thin strips of a nail files and using them instead. I’ve used them for the outward facing reeds before put haven’t tried them in the inside, might not get the traction… Boots does a good set!..
Logged
Dancing about architecture since 1997

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Reed Scratcher Improvisation Suggestions?
« Reply #7 on: January 15, 2024, 01:01:09 PM »

Scratcher ok,but you can buy desposable nail files as used by normal people and they will file your reeds
Logged
Mark Taylor
Folkloristmark

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Reed Scratcher Improvisation Suggestions?
« Reply #8 on: January 15, 2024, 01:02:46 PM »

10 PCS Professional Double Sided Nail Files Emery Board Grit Black Gel Cosmetic Manicure Pedicure  this sort of thing on Amazon or elsewhere may be a friend has some
Logged
Mark Taylor
Folkloristmark

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed Scratcher Improvisation Suggestions?
« Reply #9 on: January 15, 2024, 02:10:03 PM »

Peadar


If you pm me an address I'll send you a scratcher if that helps

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Reed Scratcher Improvisation Suggestions?
« Reply #10 on: January 16, 2024, 03:59:38 PM »

Peadar


If you pm me an address I'll send you a scratcher if that helps
Thanks Lester. PM sent .... (:)
Logged

Bob Godfried

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: Reed Scratcher Improvisation Suggestions?
« Reply #11 on: January 23, 2024, 06:00:50 AM »

I've used .125" (3mm) dia. unhardened tool steel drill rod to make reed scratchers. Grind one end to a gradual taper, then harden that end of the rod.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Reed Scratcher Improvisation Suggestions?
« Reply #12 on: February 05, 2024, 09:14:10 PM »

Feeling inordinately proud of myself having tuned all of one reed  :|bl

I had finally admitted to myself that my 1040G needed tuning. When I  got round to mapping the frequencies of individual reeds - (thanks to Tirpous for the strip of paper under the pallets suggestion- I managed to depress all the buttons at once with a carpenter's folding rule laid on top of the key board to get the paper in), I found none of the tuning was really bad except  :|bl G4+ ... which wasn't G4+  but G4# minus 40.

That reed is now G4 +10 cents

Tools as per photo cost aproximately 6 Euro : Drills Eu2.50, a cheap sharpening stone Eu 2.50,  Lid off Tin of Mushy Peas (Eu 1.20).

Lack of tuning table or jigs, tackled by sitting the bass end on my knee, fastening one bellows strap and holding thother end of the bellows to the treble endwith one hand while opening the air button with the other to expand the bellows in order to sound the G4+ on the push. A bit of a faff but it got the job done.

OK the box still needs tuning properly but 

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Scratcher Improvisation Suggestions?
« Reply #13 on: February 05, 2024, 09:35:06 PM »

Good improvisation!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed Scratcher Improvisation Suggestions?
« Reply #14 on: February 05, 2024, 11:15:03 PM »

I'm proud of you, Peader!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Reed Scratcher Improvisation Suggestions?
« Reply #15 on: February 11, 2024, 07:13:45 AM »

You can drill a hole in the end of a piece of wood and glue the end of the scratcher in it for a handle. Heat shrink works well too.
I use old needle files to make scratchers. You can get diamond bits for your dremel and carefully use it to sharpen the end of the scratcher. This cuts way down on how hard you need to press into the reed to scratch it.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal