Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Gasket + screws vs wax  (Read 2752 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Gasket + screws vs wax
« on: January 24, 2024, 04:36:44 AM »

As a tangent to another thread I started wherein I was looking for parts, I'm wondering what people's experiences are with any differences in tone/volume or reed response when using gasket + screws to affix reedplates instead of wax. Is there a noticeable difference? I've heard that some people claim it gives a brighter sound with better response.  I'm not sure...
Logged
C#/D player

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Gasket + screws vs wax
« Reply #1 on: January 24, 2024, 07:54:44 AM »

200 years ago, somewhere in Stradella...

- Mario! We gonna be rich! I found a way to use all that ear wax our family's been saving for generations!
- That's wonderful news, Luigi! What is your genius idea this time?
- We use it to hold down organetto reeds! No more need to buy expensive tacks and gasket! Ear wax is free. We sell this idea and the wax to other organetto makers and we never have to do another hard day's work in our lives!
- But Luigi...Who would want to buy an expensive organetto held together by earwax? That is disgusting!
- Hold on, Mario. We add something that smells nice to the ear wax...Pine rosin! It's free...And give it a fancy name...Italian Wax! That's it! That will sell!
- Luigi, you are a genius! Go, run to uncle Antonio, ask him to unlock the family ear wax warehouse! We finally found the use for it!
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Gasket + screws vs wax
« Reply #2 on: January 24, 2024, 08:11:05 AM »

It's worth adding "solid plate" aka "gang mounted" (ugh) reeds and flutina/concertina style of reed shoes slotted into the wood to the list.

I've only been squeezing for a couple of years, but from my decade of guitar & mandolin making experience:

The real answer is likely to be unknown, as you'd have to listen to two identical boxes playing identical reeds mounted in different ways. Identical (or very similar) boxes are possible, but producing identical reeds with different mounting mechanism is likely to be extremely costly. Then perform a blind test.
Unless the tongues are the same and mounted with the same tolerance, you'll never know if the difference you hear (or you think you hear) comes from the mounting method, or from the reed itself (which, imho, is most likely). So unless such a test is performed, everything else is speculation where cause and effect are not necessarily linked.

A big question, imho, is how does the reed produce the overtones? Fundamental frequency is strightforward, but what about the overtones?

Using a guitar analogy (and I'm not claiming that's what's happening in real life, I'm just proposing a hypothetical explanation), if the overtones are produced by tiny vibration waves going through the reed (along the reed mostly, but also across and diagonal/twisting), then the mounting method does matter, probably quite a lot.
The harder the joint between the reed plate and the reedblock, and the heavier the reed plate, the fewer vibrations will get absorbed from the reed, which means that the overtone content of such reed will be higher. I have no idea about the overtone content involved, so can't even take a guess whether the "higher" content will get interpreted by our ear as a sharper (high-freq harmonics) or mellower (lower freq harmonics). Nevertheless, whether it's right or wrong, it's an idea.

From practical point of view, I found solid plates to be a dream to work with, while wax is a bit of a bodge (imho... a very clever bodge, but still a bodge) that allows to cut production costs (looser tolerances allowable for reed blocks, ability to discard individual reed plates instead of having to chuck the whole reed plate if riveting gets completely messed up at production stage).
Hence my previous post.
« Last Edit: January 24, 2024, 08:13:24 AM by mChavez »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Gasket + screws vs wax
« Reply #3 on: January 24, 2024, 10:49:47 AM »

"wax is a bit of a bodge (imho... a very clever bodge, but still a bodge) that allows to cut production costs."

I completely agree!

Although I don't even know what "overtones" are, I do know that the harder the reed plate mounting is, the cleaner and clearer the sound is.
I would suggest that the easiest way to achieve the truest sound from the two reeds on a single plate would be to clamp the plate with screws onto the bare block, and then seal the edges with hot wax. Any gasket would 'soften' the resulting sound, in my opinion.
A simple experiment, which I mentioned quite some time ago on here, would be to hold the reed plate longitudinally between thumb and forefinger then twang a reed. Then squeeze the thumb and forefinger against the plate ends until it really hurts, and twang the reed again. there's a big difference between the two sounds.
« Last Edit: January 24, 2024, 10:54:25 AM by Winston Smith »
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Gasket + screws vs wax
« Reply #4 on: January 24, 2024, 11:47:16 AM »

A reed itself certainly has got its overtone content, that seems to be determined by stiffness, size/shape, profile & material.
If you're profiling a reed and clamp it to a workbench to ping it with your finger, you can listen to the harmonic bouquet expanding as you reduce the thickness (& stiffness) and then dying off if you took the reed too far.
A big (unanswered) question is how much does this affect the reed that's vibrating in a slot when you put air through it. We don't pluck reeds when we're playing the box.

But yeah. From engineering point of view, fixing your key parts to wood with melted wax doesn't look very elegant :-\, even if it seems to have worked reasonably well for centuries. Not exactly a concern for a spacious 21 button 2-voice box, but if you look at a concert CBA with 500 reeds with hairline gaps between them, you really start wishing that there was a better way to fix reeds to reed blocks.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Gasket + screws vs wax
« Reply #5 on: January 24, 2024, 01:02:24 PM »

"We don't pluck reeds when we're playing the box."

I would have imagined that plucking or blowing or sucking would still show a similar difference in tone. It's the same principle, surely?

As for your previous paragraphs, they're beyond the wit of this poor ex-motor mechanic, sorry.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Gasket + screws vs wax
« Reply #6 on: January 24, 2024, 02:18:10 PM »

A big (unanswered) question is how much does this affect the reed that's vibrating in a slot when you put air through it. We don't pluck reeds when we're playing the box.

Since the issue is energy being absorbed by the reed plate mounting material, I would expect a solidly mounted plate to result in a more responsive reed a reed i.e. one that speaks quicker and can be played consistently quietly.

But it's anybody's guess - there may be lots of other variables I haven't accounted for.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Gasket + screws vs wax
« Reply #7 on: January 24, 2024, 02:50:09 PM »

A big (unanswered) question is how much does this affect the reed that's vibrating in a slot when you put air through it. We don't pluck reeds when we're playing the box.

Since the issue is energy being absorbed by the reed plate mounting material, I would expect a solidly mounted plate to result in a more responsive reed a reed i.e. one that speaks quicker and can be played consistently quietly.

But it's anybody's guess - there may be lots of other variables I haven't accounted for.

In that sense, you would expect that reedplates directly against wood (then sealed with wax) would be better than a reedplate pushed up against a softer material like a gasket.

I was always led to believe that gaskets + screws/nails were considered a somewhat superior method of affixing plates, and that the reason wax is generally used is that it’s much quicker and easier to do.

Hmmm…
« Last Edit: January 24, 2024, 02:58:31 PM by mselic »
Logged
C#/D player

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Gasket + screws vs wax
« Reply #8 on: January 24, 2024, 03:33:54 PM »

The gasket and screw method is certainly cleaner and makes life a little easier if/when reeds need to be removed. A bit more work in the setup though. I’m of the group that believes affixing them with gasket material has to, even if only so slightly, dampen how the reed performs/sounds vs. affixing it directly to the block.
Logged
Too many accordions, help!

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Gasket + screws vs wax
« Reply #9 on: January 24, 2024, 05:27:03 PM »

Quote
Since the issue is energy being absorbed by the reed plate mounting material, I would expect a solidly mounted plate to result in a more responsive reed a reed i.e. one that speaks quicker and can be played consistently quietly.

Granted, but the question remains as to which is the more solid method.  Screws hold the plate solidly against a softish gasket, so the plate has freedom to move (slightly) and absorb energy. Wax holds the plate not-so-solidly to a more solid wooden backing, so again the plate has a bit of leeway.

Ideally, to minimize losses the foot of the reedblade would be fastened real-solidly to something that will not move at all (big chunk of heavy metal). In practice, the reedblock and the whole box are not totally inert and will absorb part of the vibration (ex: think wahwah ;)). The reedplate mounting method is like a filter to that absorption.

Couple more things:
- the screw method can potentially distort the plate, probably not a huge issue with care but wax avoids the problem without the care, an asset in production environment.
- Marc Savoy uses screws, no gasket and minimal wax for airtightness.  Yet another way to skin the cat...         
Logged

John Colville

  • Member
  • *
  • Offline Offline
  • Posts: 6
Re: Gasket + screws vs wax
« Reply #10 on: January 24, 2024, 10:33:17 PM »

John Crawford, sadly deceased, was a very experienced accordion technician/tuner in Scotland.

Here's a link to his comments on this subject -

https://boxandfiddlearchive.weebly.com/history-of-ranco-accordions.html

 
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Gasket + screws vs wax
« Reply #11 on: January 24, 2024, 11:52:57 PM »

"Marc Savoy uses screws, no gasket and minimal wax for airtightness."

As I said! But I think he actually knows what he's doing, unlike Yours Truly.

"A thin acoustic membrane placed on the solid wood of the casework increases the tonal strength of the instrument to a considerable extent"

I found this to be quite fascinating! Does anyone know what this was about, and would he/she care to start another thread to discuss/inform?
« Last Edit: January 25, 2024, 12:03:34 AM by Winston Smith »
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Gasket + screws vs wax
« Reply #12 on: January 25, 2024, 01:04:32 AM »

"Marc Savoy uses screws, no gasket and minimal wax for airtightness."

As I said! But I think he actually knows what he's doing, unlike Yours Truly.

"A thin acoustic membrane placed on the solid wood of the casework increases the tonal strength of the instrument to a considerable extent"

I found this to be quite fascinating! Does anyone know what this was about, and would he/she care to start another thread to discuss/inform?
I think he’s talking about the gasket on the reed blocks here.

I guess we would have to consider screwing the plates directly to wood with no wax which has been a method used as well, sounds like the savoy may be close with minimal wax?
« Last Edit: January 25, 2024, 01:06:05 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Gasket + screws vs wax
« Reply #13 on: February 07, 2024, 03:35:59 PM »

From someone's post on an accordion repair group on Facebook on the subject:

"As someone who has direct experience playing & working on instruments with accordions of the same model with waxed versus nailed/screwed on reeds, the difference is very minimal in tone. Waxed is a tad warmer sounding, nailed a tad brighter. Other elements of accordion design are much more prominent on the sound produced, whereas this difference is very minimal. So minimal in fact, Scandalli stopped making Super VI Extreme models with nailed reeds recently because they said it doesn't make enough of a difference to be worth the extra effort vs waxing like they do the large majority of their instrunents. However, it is a tool in an accordion designer's kit to help get towards very specific sounds, where that 3% matters. If you want the loudest possible instrument like a classical concert bayan or a pure french musette accordion, or yes high heat areas, it makes sense. Elsewise, it's generally making a smaller difference on the sound than the grill shape & material."
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Gasket + screws vs wax
« Reply #14 on: February 07, 2024, 03:49:37 PM »

One place where it does make a difference is on a course like Emmanuel's. I shudder to think of the mess that could ensue if 10 people are all trying to learn to apply wax. Gaskets and screw are clean and mistakes can easily rectified.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Gasket + screws vs wax
« Reply #15 on: February 07, 2024, 04:32:07 PM »

One place where it does make a difference is on a course like Emmanuel's. I shudder to think of the mess that could ensue if 10 people are all trying to learn to apply wax. Gaskets and screw are clean and mistakes can easily rectified.

What Emmanual said on the subject:

"I think that reeds works better when they are fixed strongly on a solid and heavy reed-block, so my reed-block are in beech wood, and the metal screws are easier to work later if you have a problem. I find the biggest difference is that the low reeds have nice high frequencies. But I use that system specialy (sp) because I don't like wax..."
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal