Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Any info on this Pokerwork?  (Read 6565 times)

0 Members and 1 Guest are viewing this topic.

upmine3

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 135
    • Facebook
Re: Any info on this Pokerwork?
« Reply #20 on: November 27, 2009, 07:52:52 PM »

Just on a different tangent here but i've just been looking at my own photo of the treble reeds photo number 5 to be precise and something has startled me.
How come there is metal round headed pins in between each reed plate and yet it doesn't cause inteference? I mean you are bridging the gap here between two vibrating plates with a metal pin and yet it still works. Obviously Hohner know what they are doing but it seems on scientific terms that the resonance would be carried over.
Just take a look at my Kriss III reeds (photo 3) to see they are all independant.

http://www.flickr.com/photos/14636356@N08/2073916845/
Strange but true.
Logged
Castagnari Kriss III B/C -  Hohner Double Ray De-Lux B/C Pokerwork (presswood) Pokerwork (Brown)

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Any info on this Pokerwork?
« Reply #21 on: November 28, 2009, 04:49:48 PM »

I think the answer may be that although the pins bridge the plate gap, their main aim is to hold them tightly against the wooden frame, which will tend to deaden any plate vibes. (?) I had this arrangement on my one-row, but forgot to put the pins back when I rebuilt, with no appreciable sound difference.
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Any info on this Pokerwork?
« Reply #22 on: November 29, 2009, 09:47:17 AM »

I thought the purpose of such pins was so that the plates could be tacked into position before being waxed?

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: Any info on this Pokerwork?
« Reply #23 on: November 29, 2009, 01:13:41 PM »

I thought the purpose of such pins was so that the plates could be tacked into position before being waxed?
I think they are put in afterwards. On the Liliput that I have just refurbished, the wax was so dried out that several reed plates were buzzing despite the pins, and two fell out when disturbed. Most of the pins were loose enough to be pulled out easily, even the big dome headed ones like drawing pins. I didn't put them back, but the holes were a useful visual guide for getting the reed plates back in exactly the same position.
Logged
Bill of Old Radipole Village

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Any info on this Pokerwork?
« Reply #24 on: November 29, 2009, 01:16:44 PM »

I thought the purpose of such pins was so that the plates could be tacked into position before being waxed?

That makes sense to me.  I suspect it speeded the assembly process to have someone tack the reeds in place and then pass the block off to someone else to wax.
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Any info on this Pokerwork?
« Reply #25 on: November 29, 2009, 01:44:42 PM »

I thought the purpose of such pins was so that the plates could be tacked into position before being waxed?

That makes sense to me.  I suspect it speeded the assembly process to have someone tack the reeds in place and then pass the block off to someone else to wax.

You would have great difficulty running wax between the plates with the pins in place.
I suspect it would be equally hard to knock the pins in without the plates being waxed down first!
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal