Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: converting a hohner 114 to a left-handed melodeon  (Read 858 times)

0 Members and 1 Guest are viewing this topic.

Elizabeth Moran

  • Either that B-word or that C-word
  • Member
  • *
  • Offline Offline
  • Posts: 42
  • Why, yes, I will have some cheese with that whine.
    • Bookface
converting a hohner 114 to a left-handed melodeon
« on: February 07, 2024, 08:54:36 PM »

thoughts on converting a hohner 114 to a left-handed melodeon?

i wouldn't need the reeds reversed.

is there a way of removing the stops and just have all 4 voices sound continuously?

how to re-locate the air spoon?

related question: on the hohner 113s, are the voices LMH or LMM?

thanks!
Logged
C#/D Paolo Soprani/Busilacchio MMM
A/Bb Hohner Presswood MM

FS: HoHner Swiss-made Primatona D/D# with Paolo basses with F# push for Finbar Dwyer music.
FS: Paolo Soprani 21/8 LMM B/C 2-coupler, recently revalved, terrific sound.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: converting a hohner 114 to a left-handed melodeon
« Reply #1 on: February 07, 2024, 10:18:52 PM »

HA113?
The ones I've seen are all LMM so far.
As for stopless one rows, how about my latest Frankenbox. Documented on here over the last few weeks as 6 voice box.
It would have been just as easy to build this for a lefty.
https://youtube.com/playlist?list=PLsYCMe7pL75HFEeZaebiDquIxk9JEg4Ic&si=_NalbXI3052L459T
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: converting a hohner 114 to a left-handed melodeon
« Reply #2 on: February 08, 2024, 12:07:50 AM »

No trouble to remove the stops and plug the holes. Might not be a bad idea of affixing the inner slide mechanisms in the open position to ensure they don’t somehow slide closed.
Logged
Too many accordions, help!

jonm

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 209
Re: converting a hohner 114 to a left-handed melodeon
« Reply #3 on: February 08, 2024, 06:40:38 AM »

This is exactly what Lester did to mine. Slides locked and stops removed, bass spoon reversed, with the original air hole plugged and a corresponding new one cut.

Everything would be reversible for resale.
Logged
Castagnari Mory and Giordy D/G, Hohner Erica, four-stop in G, two-stop in G

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: converting a hohner 114 to a left-handed melodeon
« Reply #4 on: February 08, 2024, 08:45:00 AM »

Unscrew the stops....the metal shaft is embedded in the knob and has a wood screw thread the other end. Sometimes the screw into the knob comes loose first in which case use a pair of pliers to extract the screw.
Inside treble end.Strip of double sided masking tape inside the top of the casing and pull the stop end blocks up till they stick to it. Let's face it, playing the box upside down is going to eliminate the problem of the stops falling to closed.
Air hole...I haven't got a spoon bass box in front of me, but if memory serves the air hole is near central, if so just unscrew the screws that hold the spoon down and turn it round. Holding the spoon pallet tight to the growl box as you take the screws out will prevent the spoon launching itself and the screws into orbit as they come free. Best to have a sheet or a broadsheet newspaper spread on the floor below the work area just in case. Turn air spoon hold it in new position to mark centre of new screw goles with a sharp pencil. Pre drill guide holes for the screws. Again I haven't got an example here but you will probably need a 1/32 " or maybe a 3/64" . You may well be able to turn the drill between your fingers if you haven't got a pin chuck. Main thing is drill needs to be smaller than the screw so that when you run the screws into the holes they form a thread is they go. Put the screws into the holes without the spoon in place, then take them back out and hold the spoon in place while you put the screws into the preformed holes.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: converting a hohner 114 to a left-handed melodeon
« Reply #5 on: February 08, 2024, 09:05:12 AM »

Air hole...I haven't got a spoon bass box in front of me, but if memory serves the air hole is near central, if so just unscrew the screws that hold the spoon down and turn it round.
The air hole is far from central. The hinge screws for the air spoon are ~central so you really need to fill the current hole, spin the air spoon, mark the centre for the new air hole and then drill it using a forsner bit.
All this is far easier to do if you remove the growl box
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal