Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Corso Bellows Stiffness  (Read 1249 times)

0 Members and 1 Guest are viewing this topic.

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Corso Bellows Stiffness
« on: February 12, 2024, 09:48:46 PM »

Hi, I have 2 1950's Hohner Corsos, one tuned B/C and the other c#/D. The compression and response is very good in both but for whatever reason the C#D box seems very stiff to play compared to the B/c. Any theories please
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Corso Bellows Stiffness
« Reply #1 on: February 12, 2024, 10:42:26 PM »

I’m guessing that it might be to do with the type of reeds.  As far as I know Corso was never made in C#D,  so what kind of reeds are in there? CC# might be original Hohner, but could also be something different.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Corso Bellows Stiffness
« Reply #2 on: February 12, 2024, 11:18:28 PM »

Yes  it was cc#. The original c# reeds were used on the outside row and new hohner reeds from modern hohner blocks on the inside row.  I will try some tunes on the outside row to see if there is any noticable difference. Also the button travel has been lessened and the pallets repadded with heavier felt. Does the reed gap make a difference?
Thanks for your reponse.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Corso Bellows Stiffness
« Reply #3 on: February 13, 2024, 08:25:13 AM »

Almost everything has the potential to make a difference.  Lower button height usually means shorter button travel which means pallets lift a shorter distance.  This may or may not make a difference.  Hohner reeds from different eras have different characteristics. Reeds made after 2000 when production moved the China are not quite the same as those made in the second half of the 20th C.  Reeds from other makers are different too. Or maybe it’s the bellows themselves.  Has either bellows been replaced?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Corso Bellows Stiffness
« Reply #4 on: February 13, 2024, 02:32:03 PM »

I'm sure that you are already familiar with the different effort required for these two styles of playing, I would expect
the C sharp/D box to require a little more effort.
You say that compression and response is very good in both, so where exactly is it that you perceive the 'stiffness?' Action? Drawing the bellows?
It's possible that one set of bellows is well 'played-in' and this can be checked by removing the treble ends and comparing the elasticity (for want of a better term,) of both. Compression can still be good in both.
I have two corsos here, of a similar era to yours except in C/Csharp and Csharp/D... they feel different to each other, but unlike yours, they also differ in volume. One of these is nearly a pound heavier and now looks heavier as well. Ha!  :D
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Corso Bellows Stiffness
« Reply #5 on: February 13, 2024, 02:55:41 PM »

No theory, but a suggestion: maybe you could swap bellows or treble ends from one Corso to the other and see if the stiffness remains in the stiff one or not.
Logged

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Corso Bellows Stiffness
« Reply #6 on: February 13, 2024, 07:23:22 PM »

Thanks to all for your contributions. 
I don't understand why 2 similar Corsos of the same vintage are a different weight.
As for this corso I think it was lighter to play before any modifications.
I am tending towards the treble pallet lift and pallet felt thickness as the main causes although I have not experienced this with modified Ericas. 
I guess it will remain one of lives mysteries.
Logged

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Corso Bellows Stiffness
« Reply #7 on: February 13, 2024, 09:02:05 PM »

Or even life's mysteries!!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal