Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reeds wax  (Read 6301 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Reeds wax
« on: February 21, 2024, 08:00:33 AM »

Hi,, I think Italian reeds wax is too soft.  But I do not know  ::)
I made reeds wax, 50% / 50% wax / resin + 2% olive oil ,   reeds wax harder than Italian,,
I would be interested in whether there is any harm or good in Harder reeds wax ??
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reeds wax
« Reply #1 on: February 21, 2024, 09:39:31 AM »

I don’t know that there’s one kind of Italian wax.  Older Hohner wax is pretty soft too and send to hold up well for several decades. 
Harder wax is more likely to crack when there are changes in temperature, especially for colder temperatures. I found this out by experience when I made my own wax using the same recipe as you.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Reeds wax
« Reply #2 on: February 21, 2024, 09:57:07 AM »

Ok,, Thanks,,  Maybe I add wax 10-20%
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reeds wax
« Reply #3 on: February 21, 2024, 10:21:50 AM »

A 90 year old Italian accordion tuner told me that he uses 50/50 + 5% olive oil.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Reeds wax
« Reply #4 on: February 21, 2024, 10:35:15 AM »

A 90 year old Italian accordion tuner told me that he uses 50/50 + 5% olive oil.

I read the same,, I put 2% oil, if I add oil, will it soften the wax??
Logged

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Reeds wax
« Reply #5 on: February 22, 2024, 11:33:28 AM »

what kind of resign do you speak of? Shellac?
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Reeds wax
« Reply #6 on: February 23, 2024, 10:41:52 AM »

resin
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Reeds wax
« Reply #7 on: February 23, 2024, 10:47:24 AM »

I don’t know that there’s one kind of Italian wax.  Older Hohner wax is pretty soft too and send to hold up well for several decades. 
Harder wax is more likely to crack when there are changes in temperature, especially for colder temperatures. I found this out by experience when I made my own wax using the same recipe as you.

I am interested in this,, is the sound the same, soft or hard reeds wax ??
Logged

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Reeds wax
« Reply #8 on: February 24, 2024, 07:27:12 PM »

resinj
i know shellac is an excrement from lac insects but i heard its part of many old accordion wax recipes.
And i also know resign is coming from trees, but there are many different trees out there and also i do not know where to buy unspecific "resign" but i do know that your "answer" is a little unfriendly.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Reeds wax
« Reply #9 on: February 24, 2024, 08:15:03 PM »

I think the resin is question is the one known as rosin in English, https://en.wikipedia.org/wiki/Rosin#Properties

While looking for the above I stumbled on this formula for reed wax in the FAQs on Bernard Loffet's website:

La recette de la cire collante pour fixer les anches d'accordéons : cette cire spéciale s'obtient en mélangeant à chaud de la cire d'abeilles + 25 à 30% du poids de cire en colophane claire (en poudre) + 10 à 15 % du poids de cire en huile de lin ou huile de parafine.

In a nutshell, he says to a given weight of wax (say 100g), add 25-30g of powdered clear rosin and 10-15g of linseed oil or 'parafin oil'.  Converted to percentages, this would be about 75% wax, 15% rosin and 10% oil.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Reeds wax
« Reply #10 on: February 24, 2024, 09:01:45 PM »

I think the resin is question is the one known as rosin in English, https://en.wikipedia.org/wiki/Rosin#Properties

While looking for the above I stumbled on this formula for reed wax in the FAQs on Bernard Loffet's website:

La recette de la cire collante pour fixer les anches d'accordéons : cette cire spéciale s'obtient en mélangeant à chaud de la cire d'abeilles + 25 à 30% du poids de cire en colophane claire (en poudre) + 10 à 15 % du poids de cire en huile de lin ou huile de parafine.

In a nutshell, he says to a given weight of wax (say 100g), add 25-30g of powdered clear rosin and 10-15g of linseed oil or 'parafin oil'.  Converted to percentages, this would be about 75% wax, 15% rosin and 10% oil.
With no wish to offend anyone - I think that the parafin in question will be pharmacutical parafin not the (mineral oil) parafin burned in parafin lamps and petrol-parafin traactors. That mistake has been made before now.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Reeds wax
« Reply #11 on: March 03, 2024, 03:19:25 PM »

I needed a small quantity of reed wax and don't have access to my workshop just now, so yesterday I tried some  "home brew" on the kitchen stove.

A bit of research told me that beeswax melts at 65C but starts to discolour if heated above 85C. Rosin has a higher melting point - round about 100C, however it dissolves readily in organic solvents.

At that point I registered that molten beeswax would be an organic solvent and that I coiuld think of reed wax as an alloy of beeswax and resin, with the resin remaining in a solid solution in the bees wax. The cooled resin molecules would harden/strengthen the beeswax base and olive oil - lower melting point, would make it a little softer and more resistant to cracking. (At least that is my best guess)

My ingredients yesterday:

Beeswax from a hardware shop, Rosin crushed down from a broken piece of fiddle rosin and olive oil from Mr. Tescos grocery department.

Proportions by weight:  Beeswax:Rosin:Olive Oil::15:3:2.

The block of wax weighed 32g, I cut it in half and finished up with a 15g lump, Similarly I got a lump of fiddle rosin weighing 3g. all measurements were done on a digital kitchen scale which only measures to the neareest 1g, so my proportions may not be accurate.

I  crushed the resin in a washed out tin can, using the the handle of a small hammer as a pestle, this wasn't entirely succesful as whilst rosin crushes easily to fine powder some small lumps remained. I heated the wax in a glass, sitting in a pan of water and heating the water very slowly on the stove. Eventually I put a mug full of freshly boiled water on top of the glass to help the wax warm up.

If you have to make very small quantities use a wooden stirrer - I tried using a tea spoon handle, but it conducted heat away and the wax froze on it. I then whittled a stirrer from a twig I had picked up earlier.  When I added the resin there was another issue - the lumps didn't dissolve- though the powder did. The lumps congealed together like a bloom of wrought iron in a puddling furnace. In the end I had to pull out the lump of resin and crush a bit more (folded inside a cloth and tapping it with the hamer this time) and add that.

Lastly I added approximately 2g og olive oil - the kitchen scales tared off at 2g, but that on a digital scale meant 2g +/- 0.5g, inevitably some of the oil stayed on the jar lid I had used as a weighing dish. When the oil landed in the hot wax a blob of white appeared - possibly contact freezing of the wax, however this stirred in inside a coupl of seconds and the white disappeared.

On cooling the  wax appearred a satisfactory shade of yellow.

I used some of the wax this morning to re-attach a couple of pallets to may most recent aquisition. So far so good.

Photographs of freshly prepared still molten wax yesterday and cooled wax this afternoon.
« Last Edit: March 03, 2024, 03:44:15 PM by Peadar »
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Reeds wax
« Reply #12 on: March 03, 2024, 04:52:51 PM »

I bought pine resin from China, (ebay ) many years ago,, I heated it on low heat 100-110 C, When it was melted I added beeswax and oil, I think I succeeded well,,  At first I put 50 / 50% but I had to add more wax,
The wax is quite old, I don't know if it's still good, I bought new wax, I'll make a new mix of it
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reeds wax
« Reply #13 on: March 03, 2024, 05:13:15 PM »

I bought pine resin from China, (ebay ) many years ago,, I heated it on low heat 100-110 C, When it was melted I added beeswax and oil, I think I succeeded well,,  At first I put 50 / 50% but I had to add more wax,
The wax is quite old, I don't know if it's still good, I bought new wax, I'll make a new mix of it

I've found it best to do the melting in that order and I could get all the rosin in a 50:50 ratio to be incorporated in the mix as long as the rosing was completely melted first. When I tried adding rosin to melted wax I ended up with a messy sticky residue of rosin that would not mix.  I think you need to get 50% or close to that of rosin to make the wax strong and sticky enough.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Reeds wax
« Reply #14 on: March 03, 2024, 06:29:01 PM »

I think the resin is question is the one known as rosin in English, https://en.wikipedia.org/wiki/Rosin#Properties

While looking for the above I stumbled on this formula for reed wax in the FAQs on Bernard Loffet's website:

La recette de la cire collante pour fixer les anches d'accordéons : cette cire spéciale s'obtient en mélangeant à chaud de la cire d'abeilles + 25 à 30% du poids de cire en colophane claire (en poudre) + 10 à 15 % du poids de cire en huile de lin ou huile de parafine.

In a nutshell, he says to a given weight of wax (say 100g), add 25-30g of powdered clear rosin and 10-15g of linseed oil or 'parafin oil'.  Converted to percentages, this would be about 75% wax, 15% rosin and 10% oil.

The Wax:Rosin:Oil ratio in the reed wax I have just made up, 15:3:2 corresponds  to 75% , 15%, 10%. derived from the above

I did think the proportion of rosin was on the low side but went with it anyway.

If I remember my secondary school chemistry correctly, when you mix two organic compounds the resulting compound has a significantly lower melting point than the higher melting point constituent and I wanted to avoid overheating the beeswax, hence the decision to melt the beeswax by secondary heating from the water bath ( milk pan).

In fairness, I am not in the fettling trade, so I can afford to experiment with mixes that are way off the 50/50 Wax/Rosin ratio that seems to be more normal practice.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reeds wax
« Reply #15 on: March 03, 2024, 07:28:39 PM »

There are many varied wax mixes that seem to have a good track record,  so I don’t think the exact proportion are important. The trouble with trying different recipes is that you need to wait a few decades to know how good it is.  That applies to amateur and professional alike! 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

jarviw

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 156
Re: Reeds wax
« Reply #16 on: November 07, 2025, 06:05:29 PM »

I have searched the forum really quick for rosin, and without reviving really old threads, I will post here...

I got a vintage Farfisa Italian made electric reed organ (circa 1950-60s) that's basically a piano accordion with 72 button stradella bass on the left. A few reeds were stuck so I opened it up to clean it. While at it I noticed there are a few reeds with sides missing reed wax... Easy enough to seal, but the original reed wax is clear, hard, and shiny (and air bubbles!), which lead me to think it's just rosin?

Well, I guess my question, practically, can I just use bees wax over it, or should I try melting rosin, or is it something else completely?  Truthfully other than the stuck reeds everything sounds fine, so I probably really don't need to mess with it any further other than giving it a thorough dusting.

I will post pictures on another thread when I am on a computer and can size the pictures properly. It is a rather interesting piece!
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reeds waxver
« Reply #17 on: November 08, 2025, 01:59:49 PM »

I use a 50/50 (by weight) beeswax and rosin. The beeswax is in pellet form, white. The rosin is in lumps, translucent amber which is much cheaper than the powdered stuff used by athletes. I melt the rosin first, and melt the wax separately and then add it to the rosin, plus a good slug of linseed. The result is a deep amber colour but very sticky. It's never brittle even when cold. Beeswax on its own isn't sticky at all …it's the rosin that makes it sticky. Emergency repairs can be made with paraffin wax ..you can buy bags of it from ebay. It flows easily and is sufficiently sticky to make a pretty good job. Just don't leave the accordion in a hot car.
We've been here before in mel,net….but I have seen some Weltmeister PAs with out-of-the factory paraffin wax and not reed wax, so it's not all bad I guess.
Charlie Marshall I'd guess made his own and I asked him for the recipe after he stopped trading, but he never replied. His wax was very nice but softer than the stuff you can get from Carini (which, btw, is very cheap, but you buy it by the kg). I also wanted to know how he made the sticks. I poured my wax solution into a shallow plastic tray and managed to get the block out and then cut the sticky, not brittle wax to makes some chunky sticks, but not as good as Charlie's. I guess the trick is to make wax that is sticky and slightly soft even when cold. The Carini stuff is pretty solid and almost but not quite brittle.
« Last Edit: November 08, 2025, 02:01:32 PM by Rog »
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reeds wax
« Reply #18 on: November 08, 2025, 02:56:41 PM »

There are many varied wax mixes that seem to have a good track record,  so I don’t think the exact proportion are important. The trouble with trying different recipes is that you need to wait a few decades to know how good it is.  That applies to amateur and professional alike!
I remember talking to Nils Nielsen about this, he said he used various ingredients including carnauba wax. You could always spot his work because he also died the wax green, I've still got a chunk somewhere... ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Reeds waxver
« Reply #19 on: November 08, 2025, 10:37:06 PM »

I also wanted to know how he made the sticks. I poured my wax solution into a shallow plastic tray and managed to get the block out and then cut the sticky, not brittle wax to makes some chunky sticks, but not as good as Charlie's.

Depends how thick and how long you want the sticks to be, but I have a silicone ice cube mould that would make fingers about 12cm long and 90mm diameter. Moulds for baking and crafts come in  all kinds of shapes, and it should be fairly easy to release wax from a flexible mould by chilling it in the freezer first.
Logged
Vintage Double Ray C#/D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal