Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Dienst International - Branded RJ Ward & Sons Liverpool  (Read 2778 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Dienst International - Branded RJ Ward & Sons Liverpool
« on: February 24, 2024, 02:08:45 PM »

Aquired in the last few days. Branded for RJ Ward and Sons of Liverpool who claimed to be a manufacturer of all types of wind instruments including accordions and apparently specialised in equipment for military bands. (acknowledgement due to Chiffandpiffle forum and contributor"Dognose", for publishing source information.
Instrument doesn't have International corner plates, but does bear other hallmarks of real manufacturer - most obviously medals awarded Antwerp 1885 &  Leipzig 1897 emblazoned on bellows frame, together with the Crosskeys trademark on the Dienst pattern keyboard.

I think the trade mark etc. combinations date it somewhere between 1897 and 1921, when RJ Ward and Sons registered a new and simpler trademark. I am not sure whether this pattern of box would have been marketed as "German Type" or "Italian Type" at the time. Straps are red felt lined tan leather- found on the contemporary Dienst International Vienna Types.

Inside there were some surprises - Long plates. and, when after core drilling round the overdriven pin that held the pallet cover in place, I got to the pallets they are, whilst faced with the normal high quality white facing leather of all known Dienst boxes, the pallets themselves are made of bookbinders paper board, secured on the wire action arms with what looks like reed wax.

The long plates are not waxed in, but pinned onto a bed of very neatly laid carpet thread, set on what appears to be shellac varnish.
Internal Label states that the reeds are No.3 (or possibly No.8). Unlike other Dienst made boxes, with individual reed plates there is no makers mark on the reeds.

I genuinely don't know whether to be more disappointed at the falling below the standard of materials that Dienst International used in all their "International" branded boxes or thrilled at the discovery of another construction technique used by the firm. Notwithstanding the utilisation of long plates and cardboard pallets , the quality of workmanship is the same very high standard as on all the other Dienst boxes I have seen.

Looking for two 10mm diameter x 3mm thick white button heads btw.

(Minor edit 21.11hrs 24/02/2024 - correction of typos)
« Last Edit: February 24, 2024, 09:12:02 PM by Peadar »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #1 on: February 24, 2024, 02:14:36 PM »

Not sure whether to upgrade the pallets to wood and attach them with hide glue and leather patches as on branded internationals, or replace them with new cardboard ones.

My committment to authentic restoration is really challenged with this one!
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #2 on: February 25, 2024, 09:40:13 PM »

I must say I wondered if the cardboard pallets were original.  I have a same-era-and-company 2-row where the (hidden) pallets are metal and welded in place so maybe anything you consider practical would be ok, really.  (:)

Concerning the buttons, 10mm doesn't seem to be readily available, too small for treble and too large for bass.  For only 2 buttons, if you can find a length of 10mm dia. rod of suitable material it should not be too difficult to file and sand a close-enough crown on the end, saw off for the required button height, and repeat.

 
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #3 on: March 04, 2024, 09:20:52 PM »

Re attached the pallets that had fallen off, using freshly made up reed wax.

The original fixing of the pallets appears to have been done with two deft strokes of a wax laden brush. (The pallets fixed with old brown wax), the new bright yellow wax is not well applied. I used a brush that was too small to deposit enough wax all at once and had to use multiple strokes, unfortunately my hand trembled as well, so it really doesn't match the standard of the original workman.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #4 on: March 04, 2024, 09:30:26 PM »

Another surprise! The first button pull is the same as second button push. I have never found this on a long plate box before!

Box is in D.

 The long plate set up I expected was F#/G A/C# D/E F#/G etc.

Not F#/A A/C# D/E F#/G etc.
« Last Edit: March 04, 2024, 09:38:34 PM by Peadar »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #5 on: March 07, 2024, 07:15:33 PM »

That’s pretty much a standard one row not layout. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #6 on: March 07, 2024, 08:15:07 PM »

I have my one row tuned F♯/B, A/C♯ .
That Pull B is essential for Irish tunes.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #7 on: March 07, 2024, 10:15:03 PM »

That’s pretty much a standard one row note layout.
Agreed, but I think/thought it was unusual on the old long plate boxes.

I have my one row tuned F♯/B, A/C♯ .
That Pull B is essential for Irish tunes.
Thanks Pearse. I foresee a need for a couple of F#/B plates a few months down the line....but not for this particular box.


Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #8 on: May 06, 2024, 11:48:08 AM »

With upgrades to measuring equipment the treble buttons are 10.5mm diameter, comprising a 5mm long wooden peg and a 4mm thick cap, probably of ivoroid. I may have to a make temporary key until I can get suitable material / tooling for a proper job.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #9 on: May 06, 2024, 12:14:38 PM »

Make the missing one in a different colour and turn it into a feature  ;)
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #10 on: May 12, 2024, 12:28:26 AM »

Make the missing one in a different colour and turn it into a feature  ;)
NO!!!!
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #11 on: May 12, 2024, 12:33:35 AM »

Job done!
Button heads filed down from blouse buttons. Missing key from a dry stick .
« Last Edit: May 12, 2024, 12:49:00 PM by Peadar »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Dienst International - Branded RJ Ward & Sons Liverpool
« Reply #12 on: May 12, 2024, 06:00:43 PM »

And as a wee demonstration of what she sounds like (Going for a TFPOO here-- Theme of the month "Tunes from where you live")

An absolute beginner standard "Nell Fee's Polka": First tune in Bobby Gardiner's Guide to the Irish B/C accordion.

https://youtu.be/HRElXT-vtCk
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal