Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass button squeaks on Club II  (Read 2664 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Bass button squeaks on Club II
« on: March 04, 2024, 09:38:48 PM »

Hi, I thought for ages it was the springs in the bass end that were squeaking, but on closer inspection it seems to be the bass buttons (Erica style) rubbing against the side of their holes… Everything seems nicely aligned, and I’d prefer not to go drilling out the holes to line them, so is there some kind of dry lubricant that can be applied inside them, or perhaps some other solution?.. Thanks!..
Logged
Dancing about architecture since 1997

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Bass button squeaks on Club II
« Reply #1 on: March 05, 2024, 07:12:51 AM »

I think that running a reamer through the hole should sort it.
Either 0.5mm larger than the hole & straight, or a tapered one in the right size (or a tapered adjustable one).

Problem with the tapered one is that you want to access the hole from the inside of the box  :-\
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass button squeaks on Club II
« Reply #2 on: March 05, 2024, 07:48:48 AM »

Enlarging the hole without fitting a felt bush will make the button feel sloppy.  Just cleaning the hole might be enough.  My quick fix for this sort of thing is powdered ptfe spray.  Make sure it is one without any oily or waxy components. 
The permanent fix is to ream out the hole and line it with a bush made of woven felt.  If you leave the felt a mm proud of the surface you can also discard the felt washer.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Bass button squeaks on Club II
« Reply #3 on: March 05, 2024, 02:10:03 PM »

If you leave the felt a mm proud of the surface you can also discard the felt washer.


Brilliant!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass button squeaks on Club II
« Reply #5 on: March 05, 2024, 07:23:05 PM »

I've tried that, it's a bit too oily for me.  This is what I use, dries completely just leaving a fine, almost invisible, powder. Expensive but worth the money imho.
https://www.axminstertools.com/ambersil-dry-ptfe-film-anti-stick-952137?queryID=083304df13deb86812212873e8f31f8c
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass button squeaks on Club II
« Reply #6 on: March 05, 2024, 07:24:27 PM »

If you leave the felt a mm proud of the surface you can also discard the felt washer.


Brilliant!

here is a pic that show the end of the felt sticking out

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Bass button squeaks on Club II
« Reply #7 on: March 05, 2024, 08:45:10 PM »

Quote
here is a pic that show the end of the felt sticking out

This works as a stop for mushroom buttons, but I guess it would not be necessary for Arnold's Erica-style bass buttons ?
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Bass button squeaks on Club II
« Reply #8 on: March 05, 2024, 09:02:07 PM »

That is correct, the Club has cylinder shaped buttons, so the overlap of bushing wouldn’t be necessary, although that sort of thing without the overlap would be the option if the spray doesn’t work… I’m going for the least intrusive option first since it’s a very lovely pre war Club!..

Whilst on the subject, I managed to bush the 1040G bass buttons with just some very thin leather (acquired primarily for pallets), with which I lined the holes making the buttons snug…
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Bass button squeaks on Club II
« Reply #9 on: March 05, 2024, 09:04:43 PM »

I've tried that, it's a bit too oily for me.  This is what I use, dries completely just leaving a fine, almost invisible, powder. Expensive but worth the money imho.
https://www.axminstertools.com/ambersil-dry-ptfe-film-anti-stick-952137?queryID=083304df13deb86812212873e8f31f8c

I’ll have to sell all remnants of my PA collection for that lol... Could be worth it!…
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Bass button squeaks on Club II
« Reply #10 on: March 05, 2024, 09:13:30 PM »

When you say ‘powder’, is that like graphite powder ie grey?..
Logged
Dancing about architecture since 1997

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Bass button squeaks on Club II
« Reply #11 on: March 05, 2024, 09:46:24 PM »

Theo is talking about PTFE leaving a fine powder residue.
Graphite powder is a different substance altogether. Probably not suited to this situation as it would leak out and get all over the fingers and everything else.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Nigel Champion

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: Bass button squeaks on Club II
« Reply #12 on: March 06, 2024, 01:46:32 AM »

Check what the PTFE propellant is.  Mine has di-methyl-ether which damaged the pearloid finish :-(

Out the buffing disc and paste{sigh}
Nigel
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass button squeaks on Club II
« Reply #13 on: March 06, 2024, 07:37:47 AM »

Spraying from the inside will minimise contact with celluloid.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Bass button squeaks on Club II
« Reply #14 on: March 06, 2024, 05:45:41 PM »

Thanks for the heads up! I’ll spray ptfe on to a brush first, then apply to the button from the inside. I’ll report back!..
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Bass button squeaks on Club II
« Reply #15 on: May 19, 2024, 03:02:25 PM »

Cos I said I’d report back… So I went with the WD40 ptfe spray in the end… A couple of sprays into a lid and then applied all around the buttons from the inside of the box with a paint brush. Works a treat. I also applied to the springs and it’s infinitely better that the graphite powder/ methylated spirit mixture I had tried before on them. I’ve now given all my boxes the ptfe treatment!..
Logged
Dancing about architecture since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal