Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Gauging spring tension  (Read 1466 times)

0 Members and 1 Guest are viewing this topic.

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Gauging spring tension
« on: March 05, 2024, 11:26:46 PM »

Looking for a tool/measuring device that can give specific readings for button spring tension, a force gauge so to speak. Anyone know of anything suitable? The few I’ve come across are for much heavier applications and are no good for this line of work unfortunately.
Logged
Too many accordions, help!

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Gauging spring tension
« Reply #1 on: March 06, 2024, 01:38:01 AM »

« Last Edit: March 06, 2024, 08:33:59 AM by Pearse Rossa »
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Gauging spring tension
« Reply #2 on: March 06, 2024, 08:56:40 AM »

I use one of those (different brand, but same tool) and it's lovely. You'd want something that can show up to 200 or 300 grammes. It doesn't matter what number or units it measures in to me, I just use it to get an even button pressure across a keyboard, or to compare spring tension from one box to the next. That also eliviates the need for calibration.

Something like this, perhaps?

Or this one..
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Gauging spring tension
« Reply #3 on: March 06, 2024, 10:00:35 AM »

Chinese fish scale, Very cheap, and works
Logged

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Gauging spring tension
« Reply #4 on: March 06, 2024, 02:16:59 PM »

I use one of those (different brand, but same tool) and it's lovely. You'd want something that can show up to 200 or 300 grammes. It doesn't matter what number or units it measures in to me, I just use it to get an even button pressure across a keyboard, or to compare spring tension from one box to the next. That also eliviates the need for calibration.

Something like this, perhaps?

Or this one..

I had bought one of those digital ones but didn’t have much luck getting good readings, the analog one I’m keen to try. Thanks for the input!
Logged
Too many accordions, help!

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Gauging spring tension
« Reply #5 on: March 06, 2024, 04:32:55 PM »

Here's the high quality one I use made by Jonard in NY, USA. The red hand is a resettable peak indicator that I find quite handy. +/- 250 grams.

$240 new but there's one used on ebay (California) at the moment for $55:

https://www.ebay.com/itm/284589060381?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=284589060381&targetid=1491224479842&device=c&mktype=pla&googleloc=200538&poi=&campaignid=19851828444&mkgroupid=145880009014&rlsatarget=pla-1491224479842&abcId=9307249&merchantid=6296724&gad_source=1&gclid=CjwKCAiAxaCvBhBaEiwAvsLmWNsQ1Zn0tUCPJo1xrpaj0sYSDPU6hH8PC1-z1P9t8IDyTDAdU71o7BoCMDYQAvD_BwE

Scott

ps I was lucky and snagged a nice used one on ebay for $25 eight years ago.
« Last Edit: March 06, 2024, 09:10:49 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

BoxPlayer

  • Member
  • *
  • Offline Offline
  • Posts: 31
Re: Gauging spring tension
« Reply #6 on: March 06, 2024, 06:11:11 PM »

komat:
I use a small pile of coins.   Ip coin here in UK will do well.  Keep adding coins until the spring 'gives'. 
I am talking about a piano keyboard where the coins sat quite comfortably. With button keyboards a small 'platform' would have to be devised to support the coins. Then again a small pad of plasticine or blu-tank would do the job.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Gauging spring tension
« Reply #7 on: March 06, 2024, 07:04:22 PM »

komat:
I use a small pile of coins.   Ip coin here in UK will do well.  Keep adding coins until the spring 'gives'. 
I am talking about a piano keyboard where the coins sat quite comfortably. With button keyboards a small 'platform' would have to be devised to support the coins. Then again a small pad of plasticine or blu-tank would do the job.

I use a paper roll of coins and add and subtract coins into the roll as needed to determine the amount of pressure needed to begin lowering the button. As Lars said, a numerical figure isn’t as important for me as it is just having a frame of reference to even button tension (and compare between boxes). One paper roll fits $5 with of dimes (10 cents), so it was a fairly low investment : D
Logged
C#/D player

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Gauging spring tension
« Reply #8 on: March 06, 2024, 07:50:49 PM »


komat:
I use a small pile of coins.   Ip coin here in UK will do well.  Keep adding coins until the spring 'gives'. 
I am talking about a piano keyboard where the coins sat quite comfortably. With button keyboards a small 'platform' would have to be devised to support the coins. Then again a small pad of plasticine or blu-tank  ;D:D would do the job.

I use a paper roll of coins and add and subtract coins into the roll as needed to determine the amount of pressure needed to begin lowering the button. As Lars said, a numerical figure isn’t as important for me as it is just having a frame of reference to even out button tension (and compare between boxes). One paper roll fits $5 with of dimes (10 cents), so it was a fairly low investment : D



I’ll start saving up my dimes  8)
Logged
Too many accordions, help!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Gauging spring tension
« Reply #9 on: March 06, 2024, 09:50:11 PM »


komat:
I use a small pile of coins.   Ip coin here in UK will do well.  Keep adding coins until the spring 'gives'. 
I am talking about a piano keyboard where the coins sat quite comfortably. With button keyboards a small 'platform' would have to be devised to support the coins. Then again a small pad of plasticine or blu-tank  ;D:D would do the job.

I use a paper roll of coins and add and subtract coins into the roll as needed to determine the amount of pressure needed to begin lowering the button. As Lars said, a numerical figure isn’t as important for me as it is just having a frame of reference to even out button tension (and compare between boxes). One paper roll fits $5 with of dimes (10 cents), so it was a fairly low investment : D



I’ll start saving up my dimes  8)

And buy a tube of smarties....are they still a thing?
Logged

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Gauging spring tension
« Reply #10 on: March 07, 2024, 12:14:12 PM »

Anther argument against the cashless society...
Logged
On the edge of Cheshire's Golden Triangle, apparently...

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Gauging spring tension
« Reply #11 on: March 07, 2024, 02:56:26 PM »

You can tape some credit cards to an iphone. ::)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal