Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Looking for some specific old reeds ('bronze steel')  (Read 682 times)

0 Members and 1 Guest are viewing this topic.

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Looking for some specific old reeds ('bronze steel')
« on: March 12, 2024, 06:08:26 PM »

Hey folks,

I'm currently restoring a somewhat unusual Melodeon with two voices, M and H, and while I've managed to clean and tune most of the reeds up, the highest 3 push and pull reeds had the most corrosion on the plates and the reeds just aren't going to work. The pulls sort of work a bit but the corrosion causes the reeds to be too high in regards to their plate.

It would make much more sense to replace the reeds with steel on aluminum if I want this to be a player, of which it very well could be, but the reedblock resizing would be beyond my skill at present and I reckon it'd be a challenge to find reeds that fit otherwise.
I like the warm, somewhat quiet voices too, good for nighttime practicing really, but if I can find another set that fits at some point I'll do it.

the key of this one row is B. So the reeds that need replacement are the 8, 9 and 10 reeds, Medium and High versions of F#/E, B/G# and D#/A

I can post the sizes of all of the reedplates as well if anyone thinks they might have some or all of these reeds.

Otherwise, The 3 reed sizes I need are:
F#/E: 31.5mm long, 16.6mm wide (M). 23.6mm Long, 16mm wide (H)

B/G#: 29mm long, 16.4mm wide (M). 23mm long, 16mm wide
(H)

D#/A#: 27.4mm long 16.2mm wide (M). 21mm long, 16.3mm wide (H)

Indeed, if someone fancies they may have M and H reeds of aluminum and steel make that might fit, I would be very interested to hear it.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal