Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Restoration of Ditta Tomati & Comp Accordion  (Read 1880 times)

0 Members and 1 Guest are viewing this topic.

Gary M

  • Member
  • *
  • Offline Offline
  • Posts: 10
Restoration of Ditta Tomati & Comp Accordion
« on: March 14, 2024, 08:50:13 PM »

I’m attempting restoration of a Ditta Tomati & Comp accordion Ca 1910 in GCB with Stradella bass.  I’m a retired engineer and experienced woodworker but this is my first restoration. I’ve followed this site but not often posted. My thoughts are to post progress pictures and solicit comments and advice. 

I’m starting with a general clean-up and then case work repair, where I am most comfortable. I will leave what look like nightmares (re-facing Stradella bass pallets?) until later. 

Today’s problem: I am guessing that the metal keyboard cover is nickel (or silver?) plated brass.  It is hand cut and not symmetrical. The plating is bubbled, peeling, and not salvageable. My thought is to buff off the old plating and re-plate it with nickel. Comments?  Also, somewhere it acquired crudely stamped letters “ATTILIO BALDOVIN & CO PORT ARTHUR ONT. C.” Internet search draws a blank. Any ideas why that would be engraved on the keyboard?
Logged

Gary M

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Restoration of Ditta Tomati & Comp Accordion
« Reply #1 on: March 14, 2024, 08:57:17 PM »

This is a progress picture after clean up.
Logged

WestOz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: Restoration of Ditta Tomati & Comp Accordion
« Reply #2 on: March 15, 2024, 03:43:58 AM »

Presumably ATTILIO BALDOVIN & CO were the selling agent in Port Arthur, Ontario, Canada?
Logged
Castagnari Dony, DB Binci, Hohner Pressedwood,  Liliput, Preciosa,Octoput,etc.

Gary M

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Restoration of Ditta Tomati & Comp Accordion
« Reply #3 on: March 15, 2024, 05:52:40 PM »

That seems logical, but it’s surprising that a sales agent would put such a large, prominent, and crudely done name on what must have been an expensive instrument. Seems like a sticker on the back would have sufficed   
Logged

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Restoration of Ditta Tomati & Comp Accordion
« Reply #4 on: March 15, 2024, 07:09:59 PM »

It seems Attilio Baldovin was an accordion manufacturer in Port Arthur, Ontario (now Thunder Bay).  Google finds a few links from the Canadian Museum of History, for instance this picture of a Baldovin chromatic accordion: https://www.museedelhistoire.ca/collections/artifact/2168177

If you're replating and the assymetry is not too bad, would it be possible to flip the plate around ? 



Logged

Gary M

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Restoration of Ditta Tomati & Comp Accordion
« Reply #5 on: March 15, 2024, 08:10:47 PM »

Thanks for the info. I tried flipping it but unfortunately it is too unsymmetrical.
Logged

Gary M

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Restoration of Ditta Tomati & Comp Accordion
« Reply #6 on: March 17, 2024, 07:13:46 PM »

Help, please. Can someone tell me what is going on in this picture? There is a loose block of wood that fits a hole next to the treble action.  Is this part of a 120 year old construction technique that came unglued?  Did someone cut it out to make repairs? It has been glued at some point with what might be hide glue. The opposite side looks the same so it is not a break. There are signs of old drill holes (spring holes???). How aggressively should I glue it back in? Epoxy? Titebond? Hide glue? Tacked in with hot glue?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Restoration of Ditta Tomati & Comp Accordion
« Reply #7 on: March 17, 2024, 07:47:24 PM »

It seems to be part of the structure of the keyboard housing. I would glue it back in with hide glue.  Modern glues don’t stick well when surfaces have previously been glued with hide glue,
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gary M

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Restoration of Ditta Tomati & Comp Accordion
« Reply #8 on: March 18, 2024, 12:49:31 AM »

Thanks. I’ll glue it back in with hide glue and call it good.
Logged

Gary M

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Restoration of Ditta Tomati & Comp Accordion
« Reply #9 on: March 19, 2024, 11:44:15 PM »

Eureka. Well, I finally figured it out, but I can’t believe I didn’t see it before. The accordion was not originally built by Tomati as a GCB but as a C-griff and converted. Baldovin must have done the conversion and added their name when they cut the new keyboard cover. The loose blocks are just spacers where the keyboard was shortened from 44 keys to 37 keys. It makes sense considering the similar Italian instruments of the same 1910-1912 vintage in the Swiss accordion museum are C-griff. Now that I am looking I can see where the springs were, and where the key cap holes were plugged.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal