Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Learning aid for reading staff notation  (Read 7239 times)

0 Members and 1 Guest are viewing this topic.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Learning aid for reading staff notation
« on: March 17, 2024, 11:50:42 AM »

I ‘ve been away from here for some time, but a balfolk workshop weekend coming up rekindled my joy in playing the melodeon.
But this also revived a problem that I’ve been thinking about for as long as I’ve been playing the melodeon: could there be a way to facilitate reading from staff notation without having to create tablature?

Creating tablature is hard to do ‘on the fly’ if you want to learn a new tune quickly: I’ve been to a workshop where music was handed out in staff notation (for different instruments) and there was no time to make tablature. Also, in staff notation there’s not always room to scribble down the tablature:
I would learn to play from staff, were it not that I play three different boxes: C/F, D/G and G/C.

So I thought of a reading aid that so far works for me: I write the numbers of the note positions in the diatonic scale below or above the notes, using accidentals when needed. This is not a perfect solution: on a two row box each button would have to have two numbers depending on which of the two keys one is playing in (assuming a box with rows a 4th apart).

I found a compromise that seems to work well ( I’ve used it for a couple of weeks now).
All notes on the instrument are numbered as if they belong to the key of the outer row.
Here’s an example:
On a G/C box these are the numbers to indicate the notes on the outer row: G1, A2, B3, C4, D5, E6, F#7.
The same box inner row: C4, D5, E6, Fb7, G1, A2, B3
These numbers are hard wired to their position on the keyboard and never change.

The idea is that learning to read this notation is comparable to learning to type blind. It takes some time to learn, but once you know where the numbers sit on the keyboard and where they are relative to each other, you won’t forget.
The downside is that when playing a song with the tonic on the inner row, the numbers don’t correspond to their position in the scale.

However, adding numbers this way  has advantages compared to tablature; if you know your keys/scales, the numbers can be added in no time. Also, similar notes and octaves reveal themselves (which they don’t in tablature), and when playing in the outer row key the diatonic numbers facilitate learning a tune.
And compared to using staff notation only, the numbers have the same advantage as tablature: You can play the numbered score on any box regardless of key.

I tried to teach myself to find the numbers the same way I learned to type blind: first ‘typing’ only three keys, in this case playing notes 1, 2, 3 on the outer row, then add 4, then add 5: I made a whole sheet of numbers for practising. However, somehow this didn’t work for me.

But what does work is that I remember on which row the 1, 3, and 5 are on push, and on which row on pull. Also after some time I remembered which note numbers are on the same key.

After having played for years mainly by practising songs by ear, for the first time I feel that I can use sheet music to learn a song.
The system is not a replacement for tablature, because you need to have some knowledge of scales; it is an aid to make reading staff notation easier.

I hope some of you may find this useful; I'd love to hear if you find it to be so.



Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Learning aid for reading staff notation
« Reply #1 on: March 17, 2024, 01:56:05 PM »

Have you tried a movable Do Solfege system? The notes go: Do, Re Me, Fa So, La, Te, Do, etc (just like the Sound Of Music) and Do is the root note of the key you are in on your instrument.

https://www.musictheorytutor.org/2013/03/18/what-is-solfege/
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Learning aid for reading staff notation
« Reply #2 on: March 18, 2024, 09:58:29 AM »

Hi Greg,
My idea is actually very similar to solfege, but numbers are easier to write than Do Re etc. To me ‘Re’ and 2 are the same thing.
I chose not make the ‘Do’ moveable, because then the buttons would have different numbers depending on the key. From a musical point of view my solution is less than perfect, but I believe that having fixed numbers for each key will facilitate the memorizing of the numbers and their position on the keyboard.
Once you know where the numbers are located on the keyboard and you have a numbered score, playing from staff notation should become a lot easier.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Learning aid for reading staff notation
« Reply #3 on: March 18, 2024, 10:18:40 AM »


    Solfege in very much about teaching kids to sing in Europe. But having got that far, using it to name the notes is a very logical extension. I found it fairly confusing as I'd learned ABC already, and had to double translate any mentioned note, in my head. 😵‍💫

    Rather more useful (for me) was to train my brain to be aware of what interval of the scale was being played by a finger. eg take the simple Em pull triad on outer row of a D/G.  My index finger is on tonic, middle=3rd, ring=5th

    Simple enough? Move ring finger in … T36 = Em6 👍.   Move index in 235=935 = Em9 (on E bass).

   I find that a massive help in finding my way around the keyboard and with practice you can stick in … say an 11th with your pinkie in the upper octave.  But to refocus into this thread - provided the #/b's are set up right on the stave, and one is aware that your tune in in Em rather than G - all the even intervals are on the line  and the odd ones lie between them 🙂   

  That works nicely for me.
« Last Edit: March 18, 2024, 10:20:45 AM by Chris Ryall »
Logged
  _       _    _      _ 

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Learning aid for reading staff notation
« Reply #4 on: March 18, 2024, 10:26:38 AM »

The downside is that when playing a song with the tonic on the inner row, the numbers don’t correspond to their position in the scale.

That seems to me to be a very significant drawback. It means your system doesn't work for playing tunes on the inner row, or in minor keys. To play in A minor, for example, you would have to start your scale on 2.  E minor would start on 6.

In the long run, wouldn't it be simpler to learn to play from notation on your favourite box (presumably the G/C), and then treat your other instruments as if they were in the same key as that instrument?  That is in effect what you are doing with your numbering system, but by attaching numbers to buttons which come from only one of the possible scales you could play in seems to be adding an extra complication which could actually make it more difficult for you when you want to play in other keys.  Memorising the button which plays A as "2" only makes sense when playing in G. Remembering that button as "A" works in any key. If you need help reading the dots on the fly, write the actual note name.

With your other boxes, treat them as transposing instruments and play as if they were in G/C regardless of their actual keys.

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Learning aid for reading staff notation
« Reply #5 on: March 18, 2024, 09:20:24 PM »

Here's what I use.

The line appended below (or above) the standard 5-line staff allows notation for a 2-row diatonic instrument.  User can create their own numbering system.  I use the line below the staff.  Above the line : inside row, below the line : outside row.  Draw notes indicated by a circle around the #.

It works in both directions.
« Last Edit: March 18, 2024, 09:26:55 PM by Dick Rees »
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Learning aid for reading staff notation
« Reply #6 on: March 19, 2024, 05:30:05 AM »

Creating tablature is hard to do ‘on the fly’ if you want to learn a new tune quickly...it is an aid to make reading staff notation easier.
One picture is worth a thousand words. I find it difficult to visualise what the above description looks like. Any chance of seeing a picture please?
« Last Edit: March 19, 2024, 05:32:03 AM by Roger Hare »
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.

GBbox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 615
Re: Learning aid for reading staff notation
« Reply #7 on: March 19, 2024, 09:48:56 AM »


In the long run, wouldn't it be simpler to learn to play from notation...


I think the suggestion Howard gives makes sense. The effort to learn to read and write music, in the long run, really pays back.

More about it, in a simple score you can pack quickly and in a synthetic way all the informations that are usually associated with a tablature.

Then, why bothering trying to the develop another tablature system when there is already at least half a dozen of them available, and they could all be easily replaced by a standard score?
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Learning aid for reading staff notation
« Reply #8 on: March 19, 2024, 06:04:30 PM »

A general 2-step approach that seems to work for me:

- know the name of the note I need to play.  This implies ability to read staff notation on its own (without reference to an instrument), which is not all that complicated when taken in isolation.

- know where the notes are on the instrument. Like having the keyboard layout in one's head/fingers. No matter the key, diatonic rows follow the same pattern with the 'key chord' notes on the push (ex: C, E, G for key of C) and the remaining ones on the pull. An approximate knowledge is good enough initially: letting the fingers fumble around for notes promotes tactile memory. It's like driving around town without a GPS, one gets lost often but eventually a mental map develops.     
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Learning aid for reading staff notation
« Reply #9 on: March 19, 2024, 10:59:42 PM »



   Agree with tirpois. invest time into being able to state immediately  the note played by every single button on your keyboard. I think it is best to have a separate mapping in your head for push and pull, but obviously the two are related. If you have more than an 8 bass learn the same on tge left end. I did this about 20 years ago and I've never regretted it. It opens all manner of gateways into music. 
Logged
  _       _    _      _ 

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Learning aid for reading staff notation
« Reply #10 on: March 24, 2024, 01:08:40 PM »

You've all come up with viable arguments and systems. However, I'd like to stress that the method I suggested is not meant as an alternative to tablature, and neither as a full-fledged alternative to reading staff notation.

It is an aid to make the notes in staff notation relate to buttons on the keyboard within a minute.

I'm well aware of the downsides, the main one being that the numbers connected to the keys correspond to their position in the diatonic scale only when the key of the song is related to the outer row. An alternative might be to use encircled numbers when the key of the piece is related to the inner row; each key would have different numbers depending on key.

I've considered pretending all boxes to be say, C/F, but that doesn't help if the sheet music is in the key of D, or if one is playing with other musicians. Also, I'm using both C/F and D/G for Irish, and the backing of my fellow musicians doesn't always leave room for transposition of the song.

The main reason for using this trick is that I play three boxes. If it were only one I'd use staff notation.

attached is an example: I normally would write the numbers using a pencil.
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Learning aid for reading staff notation
« Reply #11 on: March 24, 2024, 08:38:55 PM »

Willem...

I suggest numbering  the buttons rather than the notes.  Fewer numbers...

Additionally, use circled or colored numbers to indicate draw notes.  Differentiating between press and draw is extremely helpful.

Adding a single line below the staff lets you indicate the two rows of the keyboard.  Above the line, inside row.  Below the line, outside row.

Having dots on a staff enables presents rhythmic info.  Notating buttons/bellows direction via numbers enables box>box transposition, Do Re Mi being constants.
« Last Edit: March 24, 2024, 08:51:43 PM by Dick Rees »
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Learning aid for reading staff notation
« Reply #12 on: March 24, 2024, 09:00:49 PM »

If you use machines instead of hand-written, you can add a small o after the button number to indicate draw notes.  For instance:

1 = Do
1o = Re
2 = Mi
2o = Fa
3 = Sol
3o = La
4o = Ti
4 = Do

...and so on.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Learning aid for reading staff notation
« Reply #13 on: March 25, 2024, 10:27:50 AM »

Conventional tablature systems follow the logic of the instrument, so the button numbers refer to their position on the keyboard. The problem I see with your system is that the numbers don't follow the logic of the instrument, but neither do they follow the logic of music, except in one very specific situation: playing in the major key of the outer row.  Even then, you are having to remember which button corresponds to your numbering system. Why not then learn simply the name of the note itself, and cut out the numbering stage?

Your system apparently works for you, so good luck with it. But what do you do when the tune is not in the major key of the outer row?

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Learning aid for reading staff notation
« Reply #14 on: March 25, 2024, 02:45:46 PM »

It is an aid to make the notes in staff notation relate to buttons on the keyboard within a minute.

I've considered pretending all boxes to be say, C/F, but that doesn't help if the sheet music is in the key of D, or if one is playing with other musicians. Also, I'm using both C/F and D/G for Irish, and the backing of my fellow musicians doesn't always leave room for transposition of the song.

The main reason for using this trick is that I play three boxes. If it were only one I'd use staff notation.

I suspect you are missing the point of diatonic instruments. you can pick up a small melodeon in any key and play most of the tunes you know on it in without much further work so, if your in a session, take more than one instrument and pick the one that works in the key of the tune being played. You don't need to know what the differences between the notes being played and the ones you learned are. They're really the same, diatonically speaking.

I learned to play a DG first and  my preference us to pretend every instrument is a DG

When learning tunes from dots, I usually take an abc and put it in a DG friendly key. Just take those dots and pretend your instrument is a DG. You don't have to worry about  what the actual notes are.

For a session which is not friendly about key selection you can take as many instruments as you need.  That's the professional's approach to the issue. If it's more than 2 or 3, find a different session.

This approach works a treat with DG, CF and BbEb, with GC, not so well, but you can treat that differently.
« Last Edit: March 25, 2024, 02:50:07 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Learning aid for reading staff notation
« Reply #15 on: March 25, 2024, 04:37:24 PM »

The main reason for using this trick is that I play three boxes. If it were only one I'd use staff notation.

I suspect you are missing the point of diatonic instruments. you can pick up a small melodeon in any key and play most of the tunes you know on it in without much further work so, if your in a session, take more than one instrument and pick the one that works in the key of the tune being played. You don't need to know what the differences between the notes being played and the ones you learned are. They're really the same, diatonically speaking.

This brings to mind a different approach, which works for me. If you can read music notation (e.g. to sing at sight, or even recognise a tune by looking at it) and you can also play be ear, you can look at the music, hear in your head how it goes, and play that.
As long as you don't have perfect pitch (I don't), playing a tune in a different key presents no problems. It's an approach that tends to develop after you start learning to play more than one instrument, when the simple mapping of "this note means press that button" no longer works.

It's also worth mentioning that most tablatures and reading aids only deal with pitches, not rhythm, and yet reading rhythms is where players usually have most trouble. I don't think there's an easy answer from that - just lots of practice! - but at least playing multiple instruments doesn't create further problems because the rhythm notation is always the same.

Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Learning aid for reading staff notation
« Reply #16 on: March 25, 2024, 06:20:11 PM »


...Also, I'm using both C/F and D/G for Irish..

It's worth saying that playing quint boxes is relatively rare in Irish sessions (or, so those who know seem to think). Maybe you could try a box more Irish friendly, such as a BC? I know nothing about them, except that it has been said that it is easier to switch early in your playing career.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Learning aid for reading staff notation
« Reply #17 on: March 25, 2024, 06:57:49 PM »

One thing I notice in the Cooley's pdf file is that the notes have the the same number irrespective of which octave they're in, so it seems to me the code does not identify the pitch in a unique way. One must still refer to the staff notation or some other source of information to get the tune right.  Am I missing something ?
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Learning aid for reading staff notation
« Reply #18 on: March 26, 2024, 02:24:55 PM »

The other point about Cooley's is that although it's written with two sharps it's actually in E min (more accurately, E dorian). Since the numbering is based on D this means the tonic is given the number 2, so the numbering doesn't bear any relationship to the position of the notes in the diatonic scale of this tune.  The player then has to remember which button is "2", as this doesn't bear any relationship to its position on the keyboard.

If you going to the trouble of learning which button is "2" you might as well learn that it is "E". The numbering adds an additional and unnecessary step in the process of transferring from the notation to the instrument.

Brian Jones

  • New Starter
  • Offline Offline
  • Posts: 1
Re: Learning aid for reading staff notation
« Reply #19 on: March 30, 2024, 12:49:57 PM »

I struggle to play melodeon without tabs although I’m learning the odd tune by memory. On my DG box I mentally number each button from the left,  find the music I want online and take a screen shot (if it’s in the public domain of course)
This puts it into photos where I use  “edit” to do the following.
Erase all that I don’t need e.g. chord details and make room for the tab.
Use tab number above each note with underscore or overscore for draw notes. (black marker)
Use red marker for notes which require base button change.
Mark each song sheet with D or G row.

Takes about 10 mins to produce one song which then goes into separate photo album.

Brian
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal