Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Looking for parts - Hohner  (Read 1309 times)

0 Members and 1 Guest are viewing this topic.

Aaron Wildman

  • Member
  • *
  • Offline Offline
  • Posts: 36
Looking for parts - Hohner
« on: March 18, 2024, 11:31:34 PM »

I am looking for a empty box/carcass.  I have a set of reeds but nothing to install them in.  Money is tight right now, so any help/consideration would be appreciated.  Or at least if folks can point me in the right direction of what to look for, since I am inexperienced.  Any advice is heartily welcome. I am handy with tools, so I am capable of fixing up an older box, as long as it is not total junk.  Located in the States. 

I'm not really sure what box my reeds will fit, so I would appreciate any knowledgeable folks chiming in.

I've attached a picture of my reed blocks (I believe I have two sets of treble reed blocks and only 1 set of bass)
« Last Edit: March 18, 2024, 11:34:50 PM by Aaron Wildman »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Looking for parts - Hohner
« Reply #1 on: March 19, 2024, 12:13:47 AM »

Could they not be from a 4 voice box? Is the 'Norma' not a 4 voice?
« Last Edit: March 19, 2024, 12:30:09 AM by Winston Smith »
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Aaron Wildman

  • Member
  • *
  • Offline Offline
  • Posts: 36
Re: Looking for parts - Hohner
« Reply #2 on: March 19, 2024, 12:59:33 AM »

Based on what I remember of my conversation with the seller a few years ago, these are brand new replacement parts.  Based on what little I know of Irish accordion music (I know of no other styles which utilize c#/d tuning) these are most likely two sets of MM reeds, with only 1 set of basses. 

Probably easier to track down a MM box than a MMMM box.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Looking for parts - Hohner
« Reply #3 on: March 19, 2024, 04:30:39 AM »

Yes, it looks like you have two sets of 2-voice (MM) C#/D reedblocks, and one set of bass reeds. These would fit in a Hohner Erica/Double-Ray/Pokerwork.
Logged
C#/D player

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Looking for parts - Hohner
« Reply #4 on: March 19, 2024, 11:36:03 AM »

I may be able to help. Do the reedblock 'shoes' have felt attached or are they bare wood? Measure the 3 different shoe dimensions.

I'm in New York state.

Scott

www.bellingersbuttonboxes.com
Logged
too many boxes...please buy one, or two, or

Aaron Wildman

  • Member
  • *
  • Offline Offline
  • Posts: 36
Re: Looking for parts - Hohner
« Reply #5 on: March 19, 2024, 02:06:39 PM »

I may be able to help. Do the reedblock 'shoes' have felt attached or are they bare wood? Measure the 3 different shoe dimensions.

I'm in New York state.

Scott

www.bellingersbuttonboxes.com

Scott, I'll get back to you tonight with the info.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Looking for parts - Hohner
« Reply #6 on: March 19, 2024, 02:26:53 PM »

Sound good. Please contact me here: scottbellinger-atsign-hotmail-dot-com for future communications.

Scott
Logged
too many boxes...please buy one, or two, or

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Looking for parts - Hohner
« Reply #7 on: March 19, 2024, 03:06:31 PM »

Check your messages
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal