Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Retuning Hohner B/C basses  (Read 2354 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Retuning Hohner B/C basses
« on: March 19, 2024, 01:20:26 AM »

I'm thinking of buying an old Hohner 4 voice B/C.  If it has the usual illogical Hohner layout can new reeds be successfully fit to the old blocks?  I like the John Nolan setup.  Would D/G plates fit where the F#/E currently is?

Or might be.  It hopefully will have Paolo style basses.  John's setup is just a variation on those.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Retuning Hohner B/C basses
« Reply #1 on: March 19, 2024, 03:48:16 PM »

It's possible and not too hard to change from the Hohner layout to the McComiskey one using the existing reeds. Not sure about Nolan layout.

Bass and chord reedplates are of a uniform size so moving them around is not a problem.
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Retuning Hohner B/C basses
« Reply #2 on: March 19, 2024, 10:35:00 PM »

John's setup is the old Paolo B/C layout, but with D/G instead of C/G.  Better than Billy's for playing in C or F, I feel.

Turns out it does have the Paolo basses, so it's just that one note that needs changed. 

Is the uniformity of plate size a Hohner thing?  Not exactly the same but I had a box converted from C#/D to B/C  and my tuner had to adjust the blocks a bit. 
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Retuning Hohner B/C basses
« Reply #3 on: March 19, 2024, 10:58:08 PM »

The chord reed plates are a consistent size though the tongue length varies, consequently there is a bit of blank space on all but the lowest reeds.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Retuning Hohner B/C basses
« Reply #4 on: March 19, 2024, 11:18:24 PM »

Italian reeds are often longer than equivalent Hohner reeds,  and Italian bass reeds are shorter and narrower.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Retuning Hohner B/C basses
« Reply #5 on: March 20, 2024, 05:16:52 AM »

Thanks for the info.  Does anyone have some spare D/G reeds they could part with?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Retuning Hohner B/C basses
« Reply #6 on: March 20, 2024, 08:16:22 AM »

You can tune the C bass reeds up to G by filing.  You might need to replace the chord reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Retuning Hohner B/C basses
« Reply #7 on: March 20, 2024, 08:40:45 AM »

"You can tune the C bass reeds up to G by filing"

Sorry, related question: Is it a reasonable adjustment to tune a G reed down by as much as a fifth to C by soldering on weights?

Got a lovely set of unisonoric old bayan reeds that I'm thinking of bastardising into a diatonic.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Retuning Hohner B/C basses
« Reply #8 on: March 20, 2024, 08:46:54 AM »

The only way to find out is to try it.
Sometimes it works faultlessly and sometimes you have wasted your time and a perfectly innocent reed.
One thing to remember is to try and keep within the compass of the original bass notes. If it was from C2 to C3, a Bb1 or a D3 will be noticeable.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Retuning Hohner B/C basses
« Reply #9 on: March 20, 2024, 08:49:02 PM »

Sorry for not being clear, I want to retune C/G up to D/G.
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Retuning Hohner B/C basses
« Reply #10 on: March 25, 2024, 10:30:22 PM »

So, can these reeds be sharpened a whole tone?

If not, is it likely a box builder would have spares?

I might cannabilize one of my G/C/Fs, if it comes to it.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Retuning Hohner B/C basses
« Reply #11 on: March 25, 2024, 10:40:36 PM »

You can tune the bass reeds up a whole tone easily.  Chord reeds probably not.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Retuning Hohner B/C basses
« Reply #12 on: March 26, 2024, 03:31:13 PM »

Still, it may be possible to recycle the chord reeds by tuning them -down-.  For example, if the notes for C chord are G3 C4 E4, a D chord F#3 A3 D4 could be made (reversibly) by solder tip-loading.

Would this match the other D chord's notes ? 
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Retuning Hohner B/C basses
« Reply #13 on: March 26, 2024, 06:59:56 PM »

Thanks for the - pardon the pun - tip!  tirpous.  That would work, good enough for me anyway.

These days though I'm seeing the value of basses without thirds - or wishing these boxes had couplers/stoppers on the bass side to kill them. 

The Hohner Amatona arrived safe and sound yesterday, too.  Great box.  I bought a Boxeen IV a while ago which is practically the same instrument, oddly enough - 4 voices, 5 treble couplers, very wet LMMM.  It has thirdless basses. 

The Hohner has a C/Fmin chord...what in God's name?  Alright, I have a min6 chord for all those tunes I play in Ab.  As it happens I play jazz standards so I do know quite a few in Ab...which I play on the piano!  Or the piano accordion! 

I even know a good few hornpipes in C/F/Bb.  Ab, that's where I draw the line.  Wouldn't even know where to start.  First chance I'm going to tape that off - and the Emaj/AMin.  Heck, maybe all the 3rds...
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal