Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Hohner Erica airtightness question  (Read 3103 times)

0 Members and 1 Guest are viewing this topic.

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Hohner Erica airtightness question
« on: March 22, 2024, 08:16:10 PM »

First off, please bear in mind two things.  One is that I am totally new to melodeons.  The other is that I am currently restoring a vintage reed organ, and the biggest problem with reed organs is air leaks.  I am therefore probably somewhat airleakophobic.

Right.  I have here a D/G Erica which arrived this morning and which I like very much.  However, having started to get used to it, I was surprised by how easily the bellows started closing from fully open with hardly any effort at all applied and with no keys depressed: as in, here's me holding bellows extended while working out which treble keys I'm going to be using and gosh, the bellows are closing slowly even though I'm not consciously pushing!

In my sad reed organ way, I automatically started looking for air leaks, and I've found that if I very slowly and carefully apply a light pressure to the fully open bellows, I can definitely feel air leaking out in several places around the rubber gasket on the bass side of the bellows.  It's difficult for me to be sure, but I reckon the leaks are between the last fold and the gasket rather than between the gasket and the box.  The treble side seems to be fine.

I have no idea how airtight a melodeon needs to be, but I'm concerned that once I get the hang of playing this thing, I'll find it running out of breath sooner than it ought to.    Am I over-thinking this?  Are all Ericas like this?  Am I going to end up bouncing this one back whence it came?
Logged
We're all doomed ...

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner Erica airtightness question
« Reply #1 on: March 22, 2024, 08:21:54 PM »

You may be overthinking it but if you think there are leaks around the bellows gasket on the bass side I would get some low tack painters table and just apply it over the joint and see if things improve.

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Hohner Erica airtightness question
« Reply #2 on: March 22, 2024, 08:28:51 PM »

... low tack painters table ...

Thank you sir, but I am (easily) confused.  What is this of which you speak?  Masking tape?
« Last Edit: March 22, 2024, 08:31:59 PM by Disparate Dan »
Logged
We're all doomed ...

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner Erica airtightness question
« Reply #3 on: March 22, 2024, 09:17:11 PM »


... low tack painters table ...


Thank you sir, but I am (easily) confused.  What is this of which you speak?  Masking tape?

Yep, but decent quality, I use THIS

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Hohner Erica airtightness question
« Reply #4 on: March 22, 2024, 09:56:35 PM »

I have no idea how airtight a melodeon needs to be

Very. With no buttons pressed it should pretty much stay closed. There's some slack to allowing a few minor leaks here and there without significantly murdering the playability on very old boxes, but generally speaking, you don't expect to have any noticeable leaks at all. From what you're saying, if you let the bass side hang free, it will open up pretty fast under its own weight?

Sounds like you might have a dud. Whether to send it back or not is a question of how much you paid for it and whether you expected to spend time & money fixing it. What might be fine for a £50 attic find will not be fine for a £800 overhauled & guaranteed.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Erica airtightness question
« Reply #5 on: March 22, 2024, 10:29:54 PM »

You should certainly not be able to feel air escaping anywhere.  If you bought it from a reputable dealer they will fix it for you.  If you bought it privately you’ll have to think about how much you paid and have a discussion with the seller.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner Erica airtightness question
« Reply #6 on: March 23, 2024, 10:51:01 AM »

Put it in a bath full of water and see where the bubbles come from  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Hohner Erica airtightness question
« Reply #7 on: March 23, 2024, 12:27:36 PM »

Definitely how the pros do it.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Hohner Erica airtightness question
« Reply #8 on: March 23, 2024, 12:57:27 PM »

I have no idea how airtight a melodeon needs to be, but I'm concerned that once I get the hang of playing this thing, I'll find it running out of breath sooner than it ought to.    Am I over-thinking this?  Are all Ericas like this?  Am I going to end up bouncing this one back whence it came?

Obviously with you being new to all this melodeon lark you won't really have much of a frame of reference yet, however Hohners aren't generally exactly airtight but you definitely should not be able to feel the air leaking. The not running out of air thing is very much a key part of getting the hang of the melodeon and will take time to get to grips with whatever box you have. I'd try Lester's  tip and see if it makes much a difference - do you know any nearby experienced players who could give it a try for you? Just thinking that might be a helpful next move.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Erica airtightness question
« Reply #9 on: March 23, 2024, 01:03:09 PM »


Obviously with you being new to all this melodeon lark you won't really have much of a frame of reference yet, however Hohners aren't generally exactly airtight . . .

I'll have to disagree there Helena.  A Hohner in good order can be just as airtight as any other make.  They are also subject to leaks when things go wrong of course. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner Erica airtightness question
« Reply #10 on: March 23, 2024, 02:20:59 PM »

Yes, my Hohner melodeons …the refurbed ones…tend to be as tight as a drum. FYi i use a stethoscope with the flat pick-up removed, as a leak detector. You can get a cheap one on eBay. The gasket is pretty easy to replace. You can at the moment buy it on eBay.
« Last Edit: March 23, 2024, 02:25:49 PM by Rog »
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Hohner Erica airtightness question
« Reply #11 on: March 23, 2024, 02:49:02 PM »

  It's difficult for me to be sure, but I reckon the leaks are between the last fold and the gasket rather than between the gasket and the box.  The treble side seems to be fine.
superglue will work fine if its leaking between last fold and the frame, apply enough amount and press back until dry.you can run a small amount of superglue all corners if you wish to make sure..i'd also replace the gasket 3mm thick should work fine  :||:   
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Erica airtightness question
« Reply #12 on: March 23, 2024, 02:52:15 PM »

3 x 5 gasket is closer to Hohner original gasket.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner Erica airtightness question
« Reply #13 on: March 23, 2024, 03:10:57 PM »

3 x 5 gasket is closer to Hohner original gasket.
I had asked about this in my Corso conversion thread, I didn’t get a response so I went with 2mm x 5mm , I had some pieces left over from what GCM had sent me for other Hohner projects ( I just asked for two row hohner gasket and that is what was sent) , the last time I ordered he asked me what size I wanted, hence my question.
The 2mm was as thick or slightly thicker than what was on the box when compressed so I used it. It worked fine.
What was there was hard as a rock.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Hohner Erica airtightness question
« Reply #14 on: March 23, 2024, 03:47:17 PM »

I have no idea how airtight a melodeon needs to be
... if you let the bass side hang free, it will open up pretty fast under its own weight? ...

Just done this, and it takes between 9 and 10 seconds.  If I then place the bass end on the table and let the weight of the treble end compress the bellows (carefully guiding it on the way down), that takes 8 seconds.  Is this good, bad or indifferent?  To put it in context, this is £700-worth from a shop, described by it as in "splendid condition".
« Last Edit: March 23, 2024, 03:49:25 PM by Disparate Dan »
Logged
We're all doomed ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Erica airtightness question
« Reply #15 on: March 23, 2024, 04:02:22 PM »

It's not in splendid condition.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Hohner Erica airtightness question
« Reply #16 on: March 23, 2024, 04:03:04 PM »

I've just let the treble end compress the bellows on one of my morinos (that's probably the heaviest treble end you'll ever see in the diatonic world) and I got tired waiting for it to close after watching it for 25 seconds. It's like watching the paint dry.
I'd rate its compression as "decent" rather than "good", as it's nowhere near the rock-solid compression of my CBAs.

While it's hard to diagnose yours without actually squeezing it, it sounds like you've been taken for a ride and should demand a full refund.
Logged

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Hohner Erica airtightness question
« Reply #17 on: March 23, 2024, 04:05:17 PM »

It's not in splendid condition.

I don't think so either Theo.  I don't anticipate any problem at all when I bounce it back.
Logged
We're all doomed ...

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Hohner Erica airtightness question
« Reply #18 on: March 23, 2024, 04:10:45 PM »

OK bellows gasket aside, I think we should also discuss the rest of the options for escaping air like weak springs or misaligned pallets or just plain worn out bellows folds that seem to "breathe". I've spent way too many hours chasing leaks and it hasn't always been successful. Maybe we need to start a support group?
Logged

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Hohner Erica airtightness question
« Reply #19 on: March 23, 2024, 04:18:47 PM »

Since I have a breeding pair of D/G Powerworks within reach I decided to do an experiment. One of my Powerworks has had a full overhaul including bellows retape and new gaskets, the other is a total junker, unrestored and purchased mostly because it was going for £250. I tried the test, letting the bass end free to test the bellows drop:

Complete junker Pokerwork: 29.7 seconds

Fully restored: got bored waiting.

As I have quite a lot of DIY to avoid just now I tested both my Nuage and Mory. Both notably more solid than the restored Pokerwork but you'd kind of expect that given that the Nuage has just had a full service and the Mory is three months old and not even broken in yet.


Yours is definitely not in 'splendid condition' and £700 is absolutely top money.  I'd bounce that one. Better luck with the next one.

Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal