Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner- Lead(Pb) plates?  (Read 1367 times)

0 Members and 1 Guest are viewing this topic.

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Hohner- Lead(Pb) plates?
« on: March 23, 2024, 07:17:58 AM »

So I was fussing around with a very old hohner I have, checking over the reeds and I noticed that the plates must be lead. They bent a bit over the years from the pressure of the screws (they're screwed to the reed block) and they're very easily scratched and produce a silvery gleam. I noticed they were heavy, shinier and corroded in places and the zinc plates I have are significantly lighter.

Was this common practice? I haven't come across another yet with lead plates, but I am curious about when they were used and when they were no longer used
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner- Lead(Pb) plates?
« Reply #1 on: March 23, 2024, 07:48:21 AM »

I’ve very occasionally seen steel plates, but not yet seen lead.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Hohner- Lead(Pb) plates?
« Reply #2 on: March 23, 2024, 08:13:08 AM »

Makes a lot of sense if you're playing in an orchestra and you're the lead accordionist.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Hohner- Lead(Pb) plates?
« Reply #3 on: March 23, 2024, 08:16:34 AM »



   Zinc?
Logged
  _       _    _      _ 

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: Hohner- Lead(Pb) plates?
« Reply #4 on: March 23, 2024, 04:09:46 PM »

Ohhhh mChavez, you took the wordplay bait nicely haha

Regarding these being zinc or lead, unless it's a particularly odd zinc alloy, I don't know if it's zinc. It behaves a lot like lead. Zinc is significantly harder than this and is pretty consistent in luster. These are so easily scratchable that it's a wonder they are still plate shaped. I've included photos of some plates, the warp of one and a scratch I lightly made in the edge of a plate. You can easily slice the stuff with an exacto/scalpel





And I recently acquired another box for spare parts and since they were similar in dimension, pitch and material ("steel bronze") I intended to use the high reed voices to replace the ones that were too far gone on the 'lead' box. These other reeds also from a hohner have the O stamp and are certainly zinc plates. Thinner, harder and lighter. Not scratchable with a finger nail either. I haven't cleaned the wax off yet but here's a photo of one of those (and it's probably a slightly later accordion I suspect)

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner- Lead(Pb) plates?
« Reply #5 on: March 23, 2024, 04:14:24 PM »

I don't think they are lead. You would be able to bend the plate easily with your fingers if they were. The surface of zinc can age in different ways and I have seen zinc plates that are as dark as yours. the end view seems to have marks indicating the plates might have been cast, usually they the plates are stamped or cut out of sheet.  Maybe there are different zinc alloys.  Pure zinc is pretty soft so it would make sense that later ones were of a firmer alloy. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: Hohner- Lead(Pb) plates?
« Reply #6 on: March 23, 2024, 04:23:38 PM »

I certainly hope you're right. I could send away for tests too, we have a lab that can do such thing near me. We had found arsenic paint used in our house (built in 1860) and we were sure it was arsenic so we were able to find a lab and have them confirm our suspicions.

I have experienced two types of lead. The kind that you generally find, sheets that flop with easy, thick rods that also are a bit more stubborn but still bendable, sinkers, roof flashing, the soft stuff.
But I've also handled printing press plates made of lead that were designed to resist pressure more. They didn't tell me if it was an alloy, they just said it was lead, but there does seem to be a harder version that's meant for slightly tougher applications. Pure lead tends to be a floppy bendy thing but there definitely are harder versions too and that could explain why these are so thick and heavy.

If I can drum up enough samples of things to get checked, the lab will do the work for $75. I'm not sure what else I have to test but I'll have a think on it. Oh, and I forgot that there's home testing kits too. It would be nice to know for sure that these aren't lead, because I have certainly been handling them a lot and cleaning the things. Fingers crossed it's just zinc
« Last Edit: March 23, 2024, 04:25:43 PM by Ross Dubois »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner- Lead(Pb) plates?
« Reply #7 on: March 23, 2024, 04:28:36 PM »

Type metal is a lead Alloy, perhaps that is what you have.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Hohner- Lead(Pb) plates?
« Reply #8 on: March 23, 2024, 04:44:01 PM »

I don't think handling a bit of lead is going to do any damage to anyone. Breathing the fumes on a regular basis - that'll probably shave off a few years from your lifespan.
So you're fine either way, just don't let young kids lick these reeds, and you'll be fine.
Logged

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Hohner- Lead(Pb) plates?
« Reply #9 on: March 23, 2024, 05:57:55 PM »

Pewter?
Logged
We're all doomed ...
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal