Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Beginner Tuning - Hohner 1140/G  (Read 1440 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Beginner Tuning - Hohner 1140/G
« on: March 23, 2024, 11:57:07 PM »

Slowly working my way through the treble end....

Dealing with one reed is fine...when you decide to do a whole boxit's a different thing altogether.
The large reeds at the low end take a lot of scratching to drop half a Herz. Outside reeds  are easy to lift and support and scrape. Inside reeds- especially the small high reeds are much more difficult to lift up and sometimes in the process the reed plate pulls out of the wax. In the middle you learn how difficult it is not to cripple a valve by inadvertantly folding it in two.
It is a steep learning curve and with scratched fingers I am beginning to see the superficial attractions of a dremel.

To a practical question:
My improvised reed lifter worked well to start with - perhaps it was beginners luck- but suddenly reeds are much more difficult to pull up, and more often than not the plate gets pulled out of the wax....Trying to work out what I am doing wrong- though obviously once a reed plate is out the easiest thing is to scrape some metal off the inside reed before putting it back onto the reed chest.
« Last Edit: March 24, 2024, 10:10:09 AM by Peadar »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Beginner Tuning - Hohner 1140/G
« Reply #1 on: March 24, 2024, 10:16:39 AM »

Let’s see a photo of your reed lifter.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Beginner Tuning - Hohner 1140/G
« Reply #2 on: March 24, 2024, 11:58:08 AM »

It's probably a highly modified ram's horn, Theo. lol.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Beginner Tuning - Hohner 1140/G
« Reply #3 on: March 24, 2024, 01:24:32 PM »

Let’s see a photo of your reed lifter.
Two photos of lifter - cut from a tin lid - After lifting reed (see third picture- reed supported). The lifter was straight apart from the hook at the end before being inserted at the end of the reed slot.

Logged

saabanders

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: Beginner Tuning - Hohner 1140/G
« Reply #4 on: March 24, 2024, 01:42:51 PM »

You need new wax.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Beginner Tuning - Hohner 1140/G
« Reply #5 on: March 24, 2024, 01:55:05 PM »

You need new wax.
Trust me - That is not the main issue here!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Beginner Tuning - Hohner 1140/G
« Reply #6 on: March 24, 2024, 01:55:43 PM »

I’m guessing but I guess the metal is too soft.  I’ve seen two types that work.  The ones Hohner used to sell which are made of very springy phosphor bronze, and steel ones that Olaf Bergflodt makes for his own use.  There are pictures of both on line, possibly on this forum.  I’ll see if I can find them.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Beginner Tuning - Hohner 1140/G
« Reply #7 on: March 24, 2024, 02:31:47 PM »

I've made lifters from the largest scrap bass reed tongues, and the steel from saws for bigger lifters.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Beginner Tuning - Hohner 1140/G
« Reply #8 on: March 24, 2024, 03:01:13 PM »

I made some Italian style lifters out of paper clips. It took a little while to figure out the angles going in and out of the reed slots but they work pretty well once I’m in the rhythm…
Logged
Dancing about architecture since 1997

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Beginner Tuning - Hohner 1140/G
« Reply #9 on: March 24, 2024, 10:00:30 PM »

A slim piece of stainless steel is integrated into a car windscreen wiper.
Measuring approximately 2.5mm in width, it can be fashioned as an excellent tool for lifting reeds.
Its flexibility and solidity provide excellent support and stability for tasks such as light filing or scratching.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal