Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Mylar Valve kits?  (Read 3488 times)

0 Members and 1 Guest are viewing this topic.

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Mylar Valve kits?
« on: March 31, 2024, 07:44:41 PM »

I was wondering if anyone sells a type of assorted valves kit or if you always just have to know what sizes you need and order large quantities of specific valves. I have maybe sets of 7 sizes right now, but may need lower reed valves and dont yet know which I'll need specifically, so I'd considered just blindly ordering different sizes, but they arent particularly cheap when you're forced to buy $10 packs of each size. Does anyone ofter just a general 'repair pack' variety or will I just have to bite the bullet and end up with more valves than I'll likely ever need, not being a professional fettler and all.

Thanks!
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Mylar Valve kits?
« Reply #1 on: April 01, 2024, 01:58:49 AM »

Here are a few options if you're looking to buy smaller quantities of different sizes:

It looks like you can buy sets of 10 of each of their 10 different sizes:

https://www.accordeontheek.nl/en/product/6502/reed-valves-synthetic.html


There's also an assortment you can buy here:

https://www.stringsandboxes.de/Original-Italy-Treble-Valves-Assortment-Type-300-ITA


More sets of individual sizes here:

https://www.libertybellows.com/shop/c/p/New-Accordion-Part---Reed-Valves-Select-Size-and-Material-x57234248.htm


And again here:

https://www.ebay.com/itm/331746357010?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bJNqbBmXRie&sssrc=2047675&ssuid=&widget_ver=artemis&media=COPY


I used to buy valves in smaller quantities but found that I quickly ran out, or I didn't have enough of a particular size, even when I was just working on my own projects.  It's also the most expensive way of buying them.  I now only buy them from Carini, but the minimum quantity for each size is 1000 ;)
« Last Edit: April 01, 2024, 02:01:02 AM by mselic »
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Mylar Valve kits?
« Reply #2 on: April 01, 2024, 10:57:38 AM »

I found a great bloke to deal with in Germany, Julius Hader at Ha-Vent. He has sent me several orders of different sizes, and quantities, of valves at what I would consider excellent (read: cheap!) prices. Good communications as well.

info@ha-vent.de
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Mick

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: Mylar Valve kits?
« Reply #3 on: April 03, 2024, 01:14:14 AM »

Nice link, sir.  Thank you.

A direct link to their site:

http://ha-vent.de/

Stimmplattenventile.

Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Mylar Valve kits?
« Reply #4 on: April 03, 2024, 02:30:45 PM »

Another vote for HA-vents.
I bought a big pack and it's lasted ages. Good quality stuff.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: Mylar Valve kits?
« Reply #5 on: April 04, 2024, 07:01:54 PM »

Thanks so much for the recommendations, folks! This is exceptionally helpful. I know I'll need more than I think I do, and like with bolts, you should always have excess as you may lose some, foul some, or end up needing more than expected. The kits from HA-Vents seem to have some solid quantities for the cost in particular
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Mylar Valve kits?
« Reply #7 on: April 05, 2024, 03:26:23 PM »

On a related note, is it this type of bostik that folks are using in place of Hohner glue?

https://www.amazon.co.uk/Bostik-Purpose-Adhesive-Strong-Blister/dp/B00N84T59W/ref=asc_df_B00N84T59W/?tag=googshopuk-21&linkCode=df0&hvadid=668294657987&hvpos=&hvnetw=g&hvrand=15028417387129425832&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9046906&hvtargid=pla-2201528174149&psc=1&mcid=7a3a3ac80a353c3fb95029f6a9b652fd
be very careful with this purple bostik glue on small valves as it melts away the plastic sometimes, depends on the quality of the valves i think,some reacts badly to this stuff  ???
evo-stik impact glue works better for me   
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Mylar Valve kits?
« Reply #8 on: April 18, 2024, 07:57:29 AM »

Looks like Ha-vent is temporarily out of action.

Is anyone in the UK planning an order from carini? I'd chip in for something like 250x10types if they only sell in packs of 1000s.
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Mylar Valve kits?
« Reply #9 on: April 18, 2024, 08:47:17 AM »

same here, waiting for ha-vent to come back, he said he'll be back at the end of this month.
we might need to join forces to get some valves from elsewhere  (:)
I need treble and bass valves too & could do 1000 each but I've never bought anything from carini..ill be happy to add a 3-4 K valves too     
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Mylar Valve kits?
« Reply #10 on: April 19, 2024, 09:27:48 AM »

You can order valve sets from ogaccordions (cornwall) and from Germany here
https://www.stringsandboxes.de/epages/es117831.sf/en_US/?ObjectID=15560643
But i've not tried either. To see the prices on Carini you need an account with them. It used to be free on request so you could try emailing them to get an account. The valves in general are relatively cheap, but you have to buy them by the 1000. It's not so for leather valves, where you seem to be able to buy them by the 100. But you need to put in a decent (ish) sized order to justify the carriage (last time it was €40). They don't charge VAT but you will pay that (in the UK) on arrival (on the goods + the carriage), plus a handling fee. If you think you can use the valves it is worth the hassle….but they can be slow in responding so you need to he patient. And use a peer to peer payment service (like e.g. WISE) to avoid the traditional international money transfer costs (they don't accept card payments or paypal). And a tip..their wax is v cheap (it's called beeswax but it is actually accordion wax). And their basic straps are good value. Shoulder straps seem to have gone up quite a bit, but they are 'trade' prices. If you want bellows tape you buy it on a 50m reel or in a big sheet (that you cut yourself).

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Mylar Valve kits?
« Reply #11 on: April 19, 2024, 04:38:45 PM »

To see the prices on Carini you need an account with them. It used to be free on request so you could try emailing them to get an account. The valves in general are relatively cheap, but you have to buy them by the 1000. It's not so for leather valves, where you seem to be able to buy them by the 100. But you need to put in a decent (ish) sized order to justify the carriage (last time it was €40). They don't charge VAT but you will pay that (in the UK) on arrival (on the goods + the carriage), plus a handling fee. If you think you can use the valves it is worth the hassle….but they can be slow in responding so you need to he patient. And use a peer to peer payment service (like e.g. WISE) to avoid the traditional international money transfer costs (they don't accept card payments or paypal). And a tip..their wax is v cheap (it's called beeswax but it is actually accordion wax). And their basic straps are good value. Shoulder straps seem to have gone up quite a bit, but they are 'trade' prices. If you want bellows tape you buy it on a 50m reel or in a big sheet (that you cut yourself).

Getting an account with Carini is free.  I've gotten most of my accordion parts from them for the past few years. Minimum orders of each item tend to be in larger quantities than you might find from smaller retail sites, but it's also the most cost effective.  For example, plastic valves sized 31x6mm will end up costing around €0.02 per valve.  It may seem like a lot to get 1000 of one size, but it's really not!  If you do a lot of valve work like me, you'll end up re-stocking every year, and if you only do occasional work on your own instruments, you'll be set for a long time and won't have to worry about running out.

I've found communication with Carini to be pretty decent.  Sometimes I hear back right away, other times it takes a few days, but they always respond.  Occasionally I've put in an order and then waited and waited, but I've found out in those cases that they are actually waiting to restock items that are included in my order.  Once, when there was a mistake in my order, they responded to my email right away (which would have been around 9pm their time), apologized profusely and made sure to set things right, sending the missing items free of charge, free of duty, etc and did not ask for the incorrect items back.  They are very professional and helpful, and I can't say enough good things about them!

I have noticed, at least in the past, that the cost of certain items may be tiered depending on one's account.  I had a colleague who was placing much larger orders with Carini than I, and his prices for bellows tape were lower than mine, which we confirmed by both logging into our accounts at the same time and checking prices.  It seemed that the cost of most items remained the same, though.  I haven't looked into it since so I'm not sure what was going on there.

Btw, I've always paid my Carini invoices through PayPal.
« Last Edit: April 19, 2024, 04:40:22 PM by mselic »
Logged
C#/D player

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Mylar Valve kits?
« Reply #12 on: April 19, 2024, 07:39:41 PM »

Thanks for that. I didn't know you could use PayPal! And, yes, they are always v professional. I put in an order a few days ago (no hurry really). When I visited they went 'ah! Jolly Roger!'. It's like Aladdin's cave…..but a cave that's more like a car show room.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Mylar Valve kits?
« Reply #13 on: April 20, 2024, 02:40:11 PM »

To see the prices on Carini you need an account with them. It used to be free on request so you could try emailing them to get an account. The valves in general are relatively cheap, but you have to buy them by the 1000. It's not so for leather valves, where you seem to be able to buy them by the 100. But you need to put in a decent (ish) sized order to justify the carriage (last time it was €40). They don't charge VAT but you will pay that (in the UK) on arrival (on the goods + the carriage), plus a handling fee. If you think you can use the valves it is worth the hassle….but they can be slow in responding so you need to he patient. And use a peer to peer payment service (like e.g. WISE) to avoid the traditional international money transfer costs (they don't accept card payments or paypal). And a tip..their wax is v cheap (it's called beeswax but it is actually accordion wax). And their basic straps are good value. Shoulder straps seem to have gone up quite a bit, but they are 'trade' prices. If you want bellows tape you buy it on a 50m reel or in a big sheet (that you cut yourself).

Getting an account with Carini is free.  I've gotten most of my accordion parts from them for the past few years. Minimum orders of each item tend to be in larger quantities than you might find from smaller retail sites, but it's also the most cost effective.  For example, plastic valves sized 31x6mm will end up costing around €0.02 per valve.  It may seem like a lot to get 1000 of one size, but it's really not!  If you do a lot of valve work like me, you'll end up re-stocking every year, and if you only do occasional work on your own instruments, you'll be set for a long time and won't have to worry about running out.

I've found communication with Carini to be pretty decent.  Sometimes I hear back right away, other times it takes a few days, but they always respond.  Occasionally I've put in an order and then waited and waited, but I've found out in those cases that they are actually waiting to restock items that are included in my order.  Once, when there was a mistake in my order, they responded to my email right away (which would have been around 9pm their time), apologized profusely and made sure to set things right, sending the missing items free of charge, free of duty, etc and did not ask for the incorrect items back.  They are very professional and helpful, and I can't say enough good things about them!

I have noticed, at least in the past, that the cost of certain items may be tiered depending on one's account.  I had a colleague who was placing much larger orders with Carini than I, and his prices for bellows tape were lower than mine, which we confirmed by both logging into our accounts at the same time and checking prices.  It seemed that the cost of most items remained the same, though.  I haven't looked into it since so I'm not sure what was going on there.

Btw, I've always paid my Carini invoices through PayPal.
When I was resetting up my account with Carini I was asked though an email conversation if I wanted to setup as a business account ( which requires business ID or other official ID to register as so) . I asked if there’s a better pricing for these accounts and was told that there is but I believe you also have to buy a certain amount more?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Mylar Valve kits?
« Reply #14 on: April 26, 2024, 05:59:57 PM »

Right, since I have to buy in bulk, hoping for your thoughts here.

1) Narrowest valves are 5.5mm (annoyingly, as that can be too wide for the shortest ones), so I can get x1000 in 28mm and cut them short when I need to.
2) Second narrowest is 6mm - same thought here: get x1000 36mm and cut shorter.


Anything bigger than that: is there any point in getting 3-layer mylar 43x6.5, or do I need leather/vileda for this size?
Any suggestions for other sizes in leather + mylar that can come in very handy?

I've got some odds and sods bough from CGM a while ago but it's always better to have some spares in stock.

Thanks.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Mylar Valve kits?
« Reply #15 on: April 26, 2024, 07:59:43 PM »

HA-vents is away until 7th May.
I have been very impressed by the valves and will definitely order again.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Mylar Valve kits?
« Reply #16 on: April 26, 2024, 08:17:53 PM »

Quote
Narrowest valves are 5.5mm

That’s a pretty standard width for the smallest valves. I don’t think I’ve actually seen narrower than that, and have not yet found it to be an issue in any accordion I’ve serviced. I’ve only *very* occasionally had to trim down the width of 6.5mm valves for some inside reeds on boxes where the reed chamber opening was quite narrow. If the reed tongue base is very wide, simply cutting out a small diagonal on the bottom right-hand corner of the valve will help bring it in closer to the reed tongue and away from the reed chamber wall to allow for clearance.

Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal