Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Getting Air Tight  (Read 850 times)

0 Members and 1 Guest are viewing this topic.

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Getting Air Tight
« on: April 13, 2024, 01:38:01 AM »

OK there has been lots of discussion on dealing with leaky bellows lately but it's probably worth talking about everything else that may cause air leaks. I've recently spent probably too much time with a flashlight and case ends with the blocks out in a dark corner of my shop looking for potential leaks and I have found many. Most were slightly misaligned pallets but there was the odd screw hole left open from an old bracket or similar. I'm also wondering if tired springs on the treble mechanism in the case of my old Hohners might let air seep past pallets. Maybe? Curious to hear what others have found.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Getting Air Tight
« Reply #1 on: April 13, 2024, 05:33:42 PM »

Leaks around the perimeter of the faceplate (fondo, palletboard...). Keyboard-casing-to-faceplate screws. On one-rows, leaky joint between growl-box and bass faceplate.
Logged

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Getting Air Tight
« Reply #2 on: April 13, 2024, 05:45:06 PM »

I have as yet very little experience of melodeons, but I do have experience of finding numerous large and small air leaks around the 216 reeds, 61 pallets, 3 bellows and countless wood/wood and wood/leather joints in the 1898 reed organ I'm working on .  If you can rig up a bare bulb on a short lead, you'll find that it works better than a torch, because you get all-round illumination rather than (mainly) one-directional.  It's also surprising how sensitive the smoke rising from an incense stick is in still air when moved close to a possible source of leakage of either positive or negative pressure.
Logged
We're all doomed ...

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Getting Air Tight
« Reply #3 on: April 13, 2024, 06:38:11 PM »

When looking for a puncture in a bike tube, the usual trick is to chuck it into a bath and look for bubbles.
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Getting Air Tight
« Reply #4 on: April 13, 2024, 08:02:53 PM »

When looking for a puncture in a bike tube, the usual trick is to chuck it into a bath and look for bubbles.

Haha, super helpful. Can I start with yours?
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Getting Air Tight
« Reply #5 on: April 13, 2024, 09:00:00 PM »

Mine are all air-tight  >:E

If pallets are leaking any significant amount of air, I would guess that the accordion will be self-playing on a very strong push. Check gaskets, bellows pin-holes, old register switches.

Another old bike trick is to lick your lips and hold them close to the potential leaks. Wet lips are very sensitive & sense the slightest air movement.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Getting Air Tight
« Reply #6 on: April 14, 2024, 11:14:49 AM »

I use a stethoscope with the round end thingie removed. The tube picks up the slightest whisper of air and it's great for pinpointing exact location of leaks. It's an essential tool for me. You can get one on eBay for a few shekels.
https://www.ebay.co.uk/itm/224129000144?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=GcNRS7NGRTW&sssrc=2349624&ssuid=YlgBboPFS3e&var=&widget_ver=artemis&media=COPY
« Last Edit: April 14, 2024, 11:16:21 AM by Rog »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal