Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Rattle  (Read 1540 times)

0 Members and 1 Guest are viewing this topic.

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Rattle
« on: April 14, 2024, 03:13:23 PM »

This link is to a lo-fi recording of bass button 4 of my D/G Erica.  Hopefully you can hear the rattle.  What's the likely cause and how might I cure it?  There's a similar thing going on with a couple of treble notes, but that's not as noticeable.

https://drive.google.com/file/d/1-3GTWSPkItx1-B3zTuycT55BqMwNRRvf/view?usp=drive_link
Logged
We're all doomed ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rattle
« Reply #1 on: April 14, 2024, 03:23:09 PM »

I don't hear a mechanical rattle there but the G sounds as if the two reeds are not quite in tune with each other.

On listening againI can hear a very quiet whispery sound with is a typical valve sound.  Do you notice it when in normal play?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Rattle
« Reply #2 on: April 14, 2024, 03:50:17 PM »

Be very careful when you open the box. There might be one of these inside!



I hear it, but I'd call it "buzzing". Could be that the valves can benefit from a spring, or could be that a reed is very-very slightly clipping the frame (which typically causes a metallic buzz).
Logged

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Rattle
« Reply #3 on: April 14, 2024, 04:54:03 PM »

On listening againI can hear a very quiet whispery sound with is a typical valve sound.  Do you notice it when in normal play?

Not  at all.  I recorded it and asked simply because I'm new to melodeons and have no reference as to what's normal/acceptable.  It's all a steep learning curve for an old git ...
Logged
We're all doomed ...

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Rattle
« Reply #4 on: April 14, 2024, 04:56:51 PM »

... Could be that the valves can benefit from a spring, or could be that a reed is very-very slightly clipping the frame (which typically causes a metallic buzz).

Reed clipping the frame I understand from my reed organ work, but could you perhaps expand a little on "valves benefiting from a spring"?
Logged
We're all doomed ...

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Rattle
« Reply #5 on: April 14, 2024, 05:30:41 PM »

"real" fettlers can probably explain this phenomenon, but I've noticed that sometimes I was getting a "backfire" or, as I think of them a "backfart" (sometimes on the active valve, sometimes on the valve opposite to the one that's open), that sounded like the valve flapping against the plate. Installing a (stronger, if applicable) spring helped keep the valve pressed against the plate and prevent the flapping/buzz. No idea if it's the correct way of dealing with this issue, but it worked to resolve some flapping on my bando.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rattle
« Reply #6 on: April 14, 2024, 06:11:49 PM »

Noisy valves usually are only a problem on bigger, lower pitch reeds, and mostly with synthetic valves.  So one solution is to replace problematic  synthetic valves with leather which is inherently quieter.  My preference is to use the type made with a layer of genuine leather and one or  more plastic layers on top.  With that type you can additionally put a downward bend in the upper layer(s) to add extra closing force. Don’t make the valve too stiff though because in extreme cases that can mute and flatten the note.  Fitting valves as well as possible so the reed can sound freely, but not have any extraneous noise is one of the hardest things to get right with free reeds.  Even new expensive instruments will normally have some valve noise if you listen carefully for it, but in normal playing it will be barely noticeable.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Rattle
« Reply #7 on: April 14, 2024, 07:26:12 PM »

Thank you gentlemen  (:)
Logged
We're all doomed ...
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal