Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellow strap vexation  (Read 1495 times)

0 Members and 1 Guest are viewing this topic.

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Bellow strap vexation
« on: April 23, 2024, 01:35:54 PM »



For some reason the original bottom bellows strap on my Erica was always a bit of a struggle to undo, so I replaced both top and bottom with the press-stud type as pictured.  That's solved that problem, but it's given me a new one: as the straps are undone and swung aside, they tend to unscrew the screws by which they're attached to the box. The screw's not really gripping the woodwork, despite it being fatter than the original one.

Before I drill out the holes, glue in short lengths of dowel and re-drill pilot holes that are barely wide enough for the screw, has anybody got a better idea to stop the screws turning?
Logged
We're all doomed ...

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Bellow strap vexation
« Reply #1 on: April 23, 2024, 01:53:31 PM »

Could you just make sure to always spin the strap in the direction that tightens the screw?
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Bellow strap vexation
« Reply #2 on: April 23, 2024, 02:12:58 PM »

Fitting a washer under the strap can sometimes help.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Bellow strap vexation
« Reply #3 on: April 23, 2024, 02:57:23 PM »

Could you just make sure to always spin the strap in the direction that tightens the screw?

If only I could ...
Logged
We're all doomed ...

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Bellow strap vexation
« Reply #4 on: April 23, 2024, 02:59:36 PM »

Fitting a washer under the strap can sometimes help.

It's got one, but maybe a penny washer would work better if a suitable size is available.
Logged
We're all doomed ...

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bellow strap vexation
« Reply #5 on: April 23, 2024, 04:48:54 PM »

I would put a small amount of superglue in the hole before screwing the screw in, usually works for this sort of problem

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Bellow strap vexation
« Reply #6 on: April 23, 2024, 05:43:59 PM »

I would put a small amount of superglue in the hole before screwing the screw in, usually works for this sort of problem
Funny you should say that, Lester.  That was the plan if all else fails.  Either that or the blue Loctite threadlocker, if I can remember where I put it ...
Logged
We're all doomed ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellow strap vexation
« Reply #7 on: April 23, 2024, 06:24:14 PM »

I would try a slightly longer screw first.  That might be able to grip the wood more securely. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Bellow strap vexation
« Reply #8 on: April 23, 2024, 08:22:59 PM »

Or, maybe have the press stud fasteners on both ends of the straps?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Bellow strap vexation
« Reply #9 on: April 24, 2024, 01:58:02 AM »

A simple remedy for the original problem, taught to me many years ago, would have been to get into the habit of first releasing the top strap, then engaging the air valve and fanning out the top of the bellows a couple of inches before attempting to release the bottom strap which should now release with comparative ease. However, as the OP has already spent time and money on his fix, this suggestion is probably a bit irrelevant now, but might be useful to others....
Logged
Tuner/repairer, now retired.

Mark Anderson

  • Member
  • *
  • Offline Offline
  • Posts: 36
Re: Bellow strap vexation
« Reply #10 on: April 24, 2024, 03:07:50 AM »



For some reason the original bottom bellows strap on my Erica was always a bit of a struggle to undo, so I replaced both top and bottom with the press-stud type as pictured.  That's solved that problem, but it's given me a new one: as the straps are undone and swung aside, they tend to unscrew the screws by which they're attached to the box. The screw's not really gripping the woodwork, despite it being fatter than the original one.

Before I drill out the holes, glue in short lengths of dowel and re-drill pilot holes that are barely wide enough for the screw, has anybody got a better idea to stop the screws turning?


Slather a bit of bee's wax (beeswax) on the screw(s). 
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Bellow strap vexation
« Reply #11 on: April 24, 2024, 01:13:36 PM »

Aren’t the fasteners on those usually a bolt with a nut on the inside? That’s what I’ve typically seen on the swivelling end of that kind of fastener. That certainly prevents things working loose. If it’s just a regular screw, using a washer between the strap and the case as Rees says helps a lot. A wider screw would also do away with having to re-drill holes.
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal